Cam Spray 1000MX – Electric Cold Water Pressure Washer – 1000 PSI, 2.0 GPM
$455.00
The 1000MX is not designed for heavy industrial stripping or paint removal. Instead, it focuses on controlled, safe cleaning power with steady flow.
At 1000 PSI and ~2 GPM, the machine prioritizes:
- Consistent rinse power rather than aggressive cutting force
- Safe operation on delicate surfaces
- Stable long-duration use without overheating
- Chemical-assisted cleaning (soap + rinse workflow)
In practical terms, it performs best when:
- You let chemicals do most of the cleaning work
- You use it as a rinse and maintenance washer rather than a “stripper”
- You need a dependable electric unit for daily or frequent use
In Stock
Description
Cam Spray 1000MX – Electric Cold Water Pressure Washer (1000 PSI, 2.0 GPM)
The Cam Spray 1000MX is a commercial-grade electric cold water pressure washer designed for light-to-medium duty cleaning applications where reliability, simple operation, and indoor-safe electric power are more important than high pressure output.
It is built on a heavy-duty steel cart frame, uses an industrial triplex plunger pump, and is powered by a 1.5 HP totally enclosed electric motor, making it suitable for continuous use in controlled environments like maintenance shops, food facilities, kennels, and light industrial cleaning stations.
Key Features
- 1000 PSI operating pressure
- 2.0–2.2 GPM flow rate (depending on configuration)
- 1.5 HP industrial TEFC electric motor (120V, 15A)
- Triplex plunger pump with ceramic pistons and stainless steel valves
- Thermal overload motor protection
- Low-pressure chemical injection system
- Adjustable spray pattern (0°, 15°, 25°, 40° tips)
- Heavy-duty steel frame cart with hose/wand storage
- 50 ft high-pressure hose (typical configuration)
Typical Applications
- Vehicle washing bays (light-duty commercial)
- Workshop floor cleaning
- Equipment maintenance cleaning
- Kennels, stables, and animal facilities
- Food prep or hygiene-sensitive areas
- Light degreasing and general maintenance
| Specification | Details |
|---|---|
| Model | Cam Spray 1000MX |
| Pressure | 1000 PSI |
| Flow Rate | ~2.0–2.2 GPM |
| Motor | 1.5 HP electric, TEFC |
| Voltage | 120V / 15A / Single Phase |
| Pump Type | Industrial triplex plunger |
| Max Inlet Water Temp | ~140°F |
| Frame | Steel cart with protective coating |
| Duty Type | Commercial light-duty / continuous intermittent |
You may also like…
-
The Cam Spray C1000E is designed for applications where controlled cleaning pressure is preferred over aggressive surface stripping.
With 1000 PSI and 2.0 GPM, it provides:
- Consistent cleaning performance
- Effective rinsing capability
- Reduced risk of surface damage
- Lower water consumption
- Safe operation on delicate equipment and surfaces
This pressure range is ideal for routine maintenance cleaning, washing vehicles, equipment rinsing, and facility upkeep.
-
Applications
The NorthStar 157116 is ideal for:
- Fleet and transportation vehicle washing
- Heavy machinery cleaning
- Construction equipment maintenance
- Industrial degreasing operations
- Oilfield equipment cleaning
- Agricultural equipment washing
- Commercial pressure washing businesses
- Manufacturing facilities
- Warehouses and distribution centers
- Municipal and public works maintenance
-
The NorthStar Trailer Hot Water Pressure Washer – 4000 PSI / 4.0 GPM / 200-Gallon Tank is a professional mobile cleaning system designed for industrial and commercial applications. Featuring high-pressure hot water cleaning capability, a heavy-duty trailer platform, and an integrated water storage tank, this system delivers powerful performance for degreasing, fleet washing, and heavy equipment cleaning. Built with industrial-grade components and engineered for continuous operation, the NorthStar hot water trailer pressure washer provides reliable, efficient, and mobile cleaning power for demanding job-site environments.
-
The STM-12 is fundamentally different from traditional surface cleaners rated at 3000–4000 PSI. Instead of relying on impact force, it uses high-temperature steam to:
- Dissolve grease and oils
- Kill bacteria and microorganisms
- Reduce chemical usage
- Accelerate drying times
- Recover wastewater during cleaning
Mosmatic states that the Steaminator can clean, disinfect, and degrease surfaces 4–5 times faster than using a steam wand alone, while leaving surfaces nearly dry due to the recovery system.
-
The NorthStar 157122 Cold Water Pressure Washer – 3100 PSI / 2.5 GPM is a powerful and reliable gas-powered cleaning machine designed for both residential and professional use. Equipped with a Honda GX160 engine and a durable Comet triplex pump, this pressure washer delivers consistent high-pressure performance for cleaning driveways, vehicles, equipment, and exterior surfaces. Its rugged steel frame, adjustable pressure system, and professional-grade components make it an excellent choice for contractors, homeowners, and small businesses seeking long-lasting cleaning power and dependable operation.
-
The 2000QE is not just a pressure washer—it’s a thermal cleaning system. The combination of 2000 PSI pressure + 4.0 GPM flow + hot water up to 195°F makes it highly effective for:
- Breaking down grease and oil without excessive pressure
- Reducing chemical usage due to heat-assisted cleaning
- Faster cleaning cycles in industrial environments
Hot water dramatically improves cleaning performance because heat lowers grease viscosity, allowing contaminants to lift more easily compared to cold water systems.
Related products
-
The Cam Spray C1000E is designed for applications where controlled cleaning pressure is preferred over aggressive surface stripping.
With 1000 PSI and 2.0 GPM, it provides:
- Consistent cleaning performance
- Effective rinsing capability
- Reduced risk of surface damage
- Lower water consumption
- Safe operation on delicate equipment and surfaces
This pressure range is ideal for routine maintenance cleaning, washing vehicles, equipment rinsing, and facility upkeep.
-
Mosmatic DR – Adjustable Roof Pressure Washer Surface Cleaner – 21in, 4000 PSI, 30.0 GPM
$543.00In StockThe Mosmatic DR Series is designed to provide uniform cleaning across large surfaces without leaving streaks, zebra striping, or missed areas.
Unlike traditional pressure washing wands that concentrate cleaning in a narrow stream, the rotating arm distributes water evenly across a 21-inch path, dramatically increasing productivity.
Key Performance Benefits
- Faster cleaning speeds
- Consistent cleaning results
- Reduced operator fatigue
- Lower risk of surface damage
- Uniform pressure distribution
- Enhanced safety when cleaning elevated surfaces
The adjustable head allows operators to optimize the spray angle based on roof pitch, wall orientation, or cleaning application.
-
The NorthStar 157115 is engineered for cleaning tasks where cold-water pressure washers are often ineffective. By combining pressure, flow, and heat, the unit quickly breaks down grease, oil, and stubborn deposits.
Cleaning Performance
- 3000 PSI provides strong impact force for dirt removal.
- 4.0 GPM ensures effective rinsing and debris removal.
- Wet steam mode enhances degreasing and sanitizing performance.
- Hot water significantly reduces cleaning time compared to cold-water systems.
The wet steam function is particularly effective for:
- Heavy grease removal
- Oil-contaminated equipment
- Food processing sanitation
- Industrial maintenance cleaning
-
The NorthStar Electric Wet Steam Pressure Washer – 2750 PSI / 2.5 GPM is a professional-grade industrial cleaning machine designed for powerful hot water and steam cleaning performance in electric-powered systems. Featuring a 230V industrial motor and CAT triplex pump, this unit delivers reliable high-pressure cleaning combined with wet steam capability for removing grease, oil, and heavy contamination. Ideal for food processing facilities, workshops, factories, and indoor commercial environments, the NorthStar electric wet steam pressure washer offers efficient, low-noise, and emission-free operation with superior cleaning results.
-
The Cam Spray 4000QE is designed for demanding cleaning environments where cold water systems struggle to remove grease and heavy contamination.
The combination of:
- 4000 PSI pressure
- 4.0 GPM flow
- Hot water up to 200°F
provides significantly faster cleaning compared to standard cold-water pressure washers.
Hot water penetrates grease and oil deposits more effectively, reducing the need for harsh chemicals while shortening cleaning time. This makes the 4000QE ideal for industrial facilities where productivity and cleanliness are critical.
-
The 2725MX sits in the high-performance electric pressure washer class, where:
- 2700 PSI provides strong cutting and surface cleaning power
- 2.5 GPM gives enough flow to rinse dirt and carry debris away efficiently
- The combination makes it far more effective than low-flow electric washers for industrial cleaning tasks
In real-world use, this model performs well for:
- Degreasing workshop floors
- Cleaning machinery and industrial equipment
- Automotive bays and detailing areas
- Driveways, pads, and light concrete cleaning
- Fleet and service vehicle washing (light-duty commercial level)
It is still an electric system, so it prioritizes control, consistency, and indoor-safe operation over raw gas-powered output.
Reviews
There are no reviews yet.