Cam Spray 2000QE – Electric Hot Water Pressure Washer – 2000 PSI, 4.0 GPM, 230V
$3,321.00
The 2000QE is not just a pressure washer—it’s a thermal cleaning system. The combination of 2000 PSI pressure + 4.0 GPM flow + hot water up to 195°F makes it highly effective for:
- Breaking down grease and oil without excessive pressure
- Reducing chemical usage due to heat-assisted cleaning
- Faster cleaning cycles in industrial environments
Hot water dramatically improves cleaning performance because heat lowers grease viscosity, allowing contaminants to lift more easily compared to cold water systems.
In Stock
Description
Cam Spray 2000QE – Electric Hot Water Pressure Washer (2000 PSI, 4.0 GPM, 230V)
The Cam Spray 2000QE is a heavy-duty commercial electric hot water pressure washer designed for industrial cleaning applications where grease, oil, grime, and contamination removal is critical. Unlike cold-water units, this model integrates a diesel-fired heating system, allowing it to produce high-temperature hot water up to ~195°F, which significantly improves cleaning efficiency on stubborn residues.
It combines a 230V industrial electric motor, a triplex plunger pump system, and a diesel burner heating coil, making it a full hot-water cleaning system for professional and industrial environments.
Key Features
- 2000 PSI operating pressure
- 4.0 GPM high-flow cleaning capacity
- 230V industrial electric motor with thermal overload protection
- Diesel-fired burner system for hot water cleaning (up to ~195°F)
- Industrial triplex plunger pump (ceramic plungers + stainless steel valves)
- Adjustable thermostat and temperature limit switch
- Low-pressure chemical injection system for detergents
- Heavy-duty trigger gun with dual wand operation
- Quick-change nozzle set (0°, 15°, 25°, 40°)
- Heavy-duty steel cart frame with large industrial wheels
Typical Applications
- Industrial equipment degreasing
- Automotive and fleet maintenance bays
- Manufacturing plant cleaning
- Food processing facilities
- Heavy machinery washdown
- Workshop oil and grease removal
Advantages
Hot Water Cleaning Power
Diesel-heated system dramatically improves grease and oil removal efficiency.
High Flow (4.0 GPM)
Speeds up rinsing and improves detergent performance.
Industrial Triplex Pump
Serviceable, durable, and designed for continuous use.
Heavy-Duty Construction
Built for daily professional cleaning environments.
Limitations
- Requires diesel fuel for burner operation
- Higher maintenance than cold water electric units
- Larger and heavier than standard pressure washers
- Not intended for casual or light residential use
| Specification | Details |
|---|---|
| Model | Cam Spray 2000QE |
| Pressure | 2000 PSI |
| Flow Rate | 4.0 GPM |
| Power | 230V electric motor |
| Heating System | Diesel-fired burner |
| Max Water Temp | ~195°F |
| Pump Type | Industrial triplex plunger |
| Duty Type | Heavy-duty commercial / industrial |
| Frame | Mobile cart with heavy-duty wheels |
You may also like…
-
The 1500MX sits in the “sweet spot” between light commercial and industrial cleaning systems:
- Much stronger cleaning force than 1000 PSI units
- High flow (3.0 GPM) improves rinsing speed and detergent coverage
- Better suited for grease, oil, and workshop dirt removal
- Still safe for indoor or enclosed environments due to electric motor
Compared to lower-pressure Cam Spray models, this unit significantly reduces cleaning time by combining moderate pressure + high water volume, which is often more effective than PSI alone.
-
The NorthStar 157117 Hot Water Pressure Washer – Wet Steam 3500 PSI / 3.5 GPM is a professional-grade industrial cleaning system designed for maximum performance and durability. Featuring a powerful Honda GX390 engine, CAT 66DX triplex pump, and advanced wet steam technology up to 250°F, this skid-mounted pressure washer delivers superior cleaning power for heavy-duty applications. Ideal for fleet washing, industrial equipment cleaning, construction maintenance, and commercial cleaning services, the NorthStar 157117 ensures efficient grease removal, deep cleaning performance, and long-term reliability in demanding environments.
-
The Generac 8873 XC Series is designed for users who need maximum cleaning performance without sacrificing reliability.
With 4200 PSI and 4.0 GPM, the unit delivers approximately 16,800 cleaning units (CU), making it suitable for demanding commercial and industrial cleaning tasks.
Cleaning Power Benefits
- Rapid removal of mud, grease, and grime
- Effective concrete and pavement cleaning
- Surface preparation before painting or coating
- Heavy equipment washdown
- Fleet vehicle cleaning
- Construction site cleanup
The combination of high pressure and substantial water flow enables faster cleaning while reducing labor time.
-
Cam Spray 3000WM/SSM3 – Electric Cold Water Wall-Mount PW – 3000 PSI, 4.0 GPM, 230V 3PH
$1,778.00In StockThe 3000WM/SSM3 is designed for continuous, high-demand cleaning operations where both pressure and flow matter equally:
- 3000 PSI provides strong surface cutting and degreasing power
- 4.0 GPM flow ensures fast rinsing and improved dirt removal
- Wall-mount design improves workflow efficiency and saves floor space
- Industrial triplex pump supports rebuildable long-term service
This combination makes it significantly more effective than smaller electric washers for:
- Heavy equipment cleaning
- Workshop floor degreasing
- Automotive bay maintenance
- Industrial machinery washdown
- Fleet and service vehicle cleaning
-
Mosmatic DR – Adjustable Roof Pressure Washer Surface Cleaner – 21in, 4000 PSI, 30.0 GPM
$543.00In StockThe Mosmatic DR Series is designed to provide uniform cleaning across large surfaces without leaving streaks, zebra striping, or missed areas.
Unlike traditional pressure washing wands that concentrate cleaning in a narrow stream, the rotating arm distributes water evenly across a 21-inch path, dramatically increasing productivity.
Key Performance Benefits
- Faster cleaning speeds
- Consistent cleaning results
- Reduced operator fatigue
- Lower risk of surface damage
- Uniform pressure distribution
- Enhanced safety when cleaning elevated surfaces
The adjustable head allows operators to optimize the spray angle based on roof pitch, wall orientation, or cleaning application.
-
The Cam Spray 4000QE is designed for demanding cleaning environments where cold water systems struggle to remove grease and heavy contamination.
The combination of:
- 4000 PSI pressure
- 4.0 GPM flow
- Hot water up to 200°F
provides significantly faster cleaning compared to standard cold-water pressure washers.
Hot water penetrates grease and oil deposits more effectively, reducing the need for harsh chemicals while shortening cleaning time. This makes the 4000QE ideal for industrial facilities where productivity and cleanliness are critical.
Related products
-
The NorthStar Electric Wet Steam Pressure Washer – 2750 PSI / 2.5 GPM is a professional-grade industrial cleaning machine designed for powerful hot water and steam cleaning performance in electric-powered systems. Featuring a 230V industrial motor and CAT triplex pump, this unit delivers reliable high-pressure cleaning combined with wet steam capability for removing grease, oil, and heavy contamination. Ideal for food processing facilities, workshops, factories, and indoor commercial environments, the NorthStar electric wet steam pressure washer offers efficient, low-noise, and emission-free operation with superior cleaning results.
-
The NorthStar Electric Cold Water Pressure Washer – 3000 PSI / 2.5 GPM / 230V is a powerful industrial electric cleaning solution designed for commercial and professional applications. Featuring a high-performance 230V electric motor and a durable CAT triplex pump, this unit delivers consistent high-pressure cleaning without the need for gasoline or engine maintenance. Ideal for workshops, factories, automotive service centers, and indoor cleaning environments, the NorthStar electric pressure washer provides reliable performance, low noise operation, and long-term durability for demanding cleaning tasks.
-
The NorthStar 157133 Cold Water Pressure Washer – 4200 PSI / 3.5 GPM (Aluminum Frame) is a powerful and lightweight industrial cleaning solution designed for professional contractors and commercial applications. Featuring a Honda GX390 engine and a CAT triplex pump, this high-performance pressure washer delivers exceptional cleaning force for removing tough dirt, grease, and debris from construction equipment, concrete surfaces, and fleet vehicles. Its corrosion-resistant aluminum frame enhances portability while maintaining durability, making the NorthStar 157133 an ideal choice for users who need maximum cleaning power combined with lightweight mobility and long-term reliability.
-
The NorthStar 157122 Cold Water Pressure Washer – 3100 PSI / 2.5 GPM is a powerful and reliable gas-powered cleaning machine designed for both residential and professional use. Equipped with a Honda GX160 engine and a durable Comet triplex pump, this pressure washer delivers consistent high-pressure performance for cleaning driveways, vehicles, equipment, and exterior surfaces. Its rugged steel frame, adjustable pressure system, and professional-grade components make it an excellent choice for contractors, homeowners, and small businesses seeking long-lasting cleaning power and dependable operation.
-
Mosmatic FL-CR-750 – Commercial Pressure Washer Surface Cleaner – 30in, 4000 PSI, 12.0 GPM
$345.00In StockThe FL-CR-750 is specifically engineered for cleaning large surface areas quickly and consistently. The 30-inch cleaning deck significantly reduces cleaning time compared to smaller 16–24 inch surface cleaners, making it ideal for contractors handling high-volume commercial projects. Its three-nozzle rotary system provides uniform cleaning coverage while minimizing streaking. The precision-balanced rotor and professional swivel ensure smooth operation even during extended cleaning sessions. -
Applications
The NorthStar 157116 is ideal for:
- Fleet and transportation vehicle washing
- Heavy machinery cleaning
- Construction equipment maintenance
- Industrial degreasing operations
- Oilfield equipment cleaning
- Agricultural equipment washing
- Commercial pressure washing businesses
- Manufacturing facilities
- Warehouses and distribution centers
- Municipal and public works maintenance
Reviews
There are no reviews yet.