Champion HR7D-12 Air Compressor – 7.5HP R-Series
$5,500.00
The Champion HR7D-12 is built for environments where consistent airflow and operational redundancy are important. The duplex configuration allows:
- Alternating operation to balance wear between pumps
- Simultaneous operation during peak air demand
- Improved uptime and reduced downtime risk
The R-30 pumps are designed for low-RPM operation, which helps reduce internal heat, vibration, and long-term wear—making the system highly reliable for daily industrial use.
In Stock
Description
Champion HR7D-12 Air Compressor – 7.5 HP R-Series Duplex Industrial Air Compressor (120 Gallon)
The Champion HR7D-12 Air Compressor is a heavy-duty R-Series duplex reciprocating air compressor system designed for automotive shops, light manufacturing, maintenance facilities, and industrial workshops requiring reliable compressed air with built-in redundancy. It features two 7.5 HP three-phase electric motors (15 HP total system power), dual Champion R-Series R-30 two-stage cast iron compressor pumps, and a 120-gallon ASME-certified horizontal air receiver tank.
Engineered for continuous-duty industrial performance, the HR7D-12 provides stable airflow and long service life through Champion’s proven splash-lubricated R-Series pump design, which operates at low RPM for improved cooling, reduced wear, and high durability.
This system delivers approximately 51.2–51.6 CFM at 175 PSI, making it suitable for multiple pneumatic tools and medium-sized production environments.
Key Features
- Duplex configuration with 2 × 7.5 HP industrial motors
- Total system power: 15 HP
- Dual R-30 two-stage cast iron compressor pumps
- Air delivery: ~51.2–51.6 CFM @ 175 PSI
- Maximum operating pressure: 175 PSI
- Large 120-gallon ASME-certified horizontal air receiver
- Splash-lubricated pump system for simplicity and reliability
- Low-speed operation (~570 RPM) for reduced heat and wear
- High-efficiency disc valve design for better airflow
- Centrifugal loadless starting system for motor protection
- Automatic alternator control for balanced pump usage
- Heavy-duty industrial cast iron construction
R-Series Advantages
Proven Industrial Durability
Cast iron pump construction designed for long-term continuous operation.
Duplex Redundancy
Two independent compressors provide backup and load-sharing capability.
Low RPM Operation
~570 RPM pump speed improves lifespan and reduces heat generation.
Stable Air Supply
120-gallon tank helps smooth pressure fluctuations during tool demand spikes.
Ideal Applications
- Automotive service centers
- Industrial workshops
- Manufacturing support systems
- CNC machining shops
- Metal fabrication facilities
- Maintenance departments
- Multi-user pneumatic systems
| Specification | Details |
|---|---|
| Model | Champion HR7D-12 |
| Series | R-Series Duplex |
| Motor Power | 7.5 HP × 2 (15 HP Total) |
| Pump Model | Dual R-30 |
| Compressor Type | Two-Stage Reciprocating |
| Lubrication | Splash Lubricated |
| Air Delivery | ~51.2–51.6 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 120 Gallons |
| Tank Orientation | Horizontal |
| Pump Speed | ~570 RPM |
| Voltage | 208V / 230V / 460V Three-Phase |
| Duty Cycle | Continuous Industrial Service |
| Application | Automotive / Industrial / Workshop Use |
You may also like…
-
The DXCMH1393075 is designed for field operations where electrical power is unavailable or impractical. Its main strength is high airflow in a portable gas-driven platform, allowing it to run multiple pneumatic tools at the same time.
Key performance characteristics:
- Strong airflow for framing, nailing, and impact tools
- Stable pressure output for continuous jobsite use
- Engine-driven independence for remote work
- Durable cast iron pump designed for harsh environments
-
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
-
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
-
The ESP10D120V3 is designed for high-demand industrial environments where multiple pneumatic tools operate simultaneously. Compared to single-phase Silent Air models, the 3-phase configuration provides:
- Smoother power delivery and higher efficiency
- Better performance under continuous load
- Reduced electrical stress and heat buildup
- Improved suitability for long runtime industrial systems
Typical applications include:
- Fabrication workshops
- Automotive service centers with multiple bays
- Manufacturing support systems
- Paint and finishing lines
- Multi-tool pneumatic stations
-
The BR26 sits in Champion’s upper industrial reciprocating range, designed for facilities that need high-volume compressed air without moving to rotary screw systems.
Its R-Series pump uses a robust mechanical design with:
- Intercoolers between stages for efficiency
- Heavy-duty crankshaft and bearings for long life
- Disc valves for high airflow stability
- Splash lubrication for simpler maintenance
This makes it ideal for operations requiring consistent pressure under continuous load conditions.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
Related products
-
BelAire 438VE Air Compressor: Elite-Series 8HP vertical compressor upgraded with a low-oil safety switch and aftercooler for superior moisture control and durability.
- Elite Drive: 8HP Protected Motor
- Volume Delivery: 716 L/min (25.3 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Vessel Size: 60 Gallon Vertical
- Safety Module: Aftercooler & Low-Oil
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
-
Despite being a powerful shop compressor, the 418VL is known for relatively quiet operation compared to lighter-duty high-RPM compressors. The low-speed pump design reduces noise, vibration, and heat buildup, which helps extend service life and improves efficiency during long operating cycles.
Its 80-gallon tank also helps stabilize air pressure, reducing frequent motor cycling during heavy tool use.
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.
- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
-
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
Reviews
There are no reviews yet.