Champion

Showing 1–16 of 35 results

Sort:
Show:
Sort:
  • Champion 100231 is a portable dual fuel generator 5500W with a 389cc OHV engine. It runs on gasoline or propane (LPG), delivering reliable power for home backup, construction sites, and emergency use with long runtime and durable performance.
  • Champion 100519 5000W open frame inverter generator with clean power output. Ideal for home backup, RV, construction, and emergency power supply with fuel-efficient performance.
  • Champion 100520 7000W inverter generator with electric start. Clean power output for home backup, construction, RV, and emergency use. Reliable and fuel efficient.
  • Champion 200962 is a portable dual fuel inverter generator 1850W with CARB compliance. Runs on gasoline or propane, delivering clean, quiet, and stable power for RV, camping, and emergency backup use.
  • Champion 200989 is a 3500W CARB-compliant inverter generator with clean, stable power output. It is ideal for home backup, RV use, camping, and outdoor applications with quiet operation and long runtime.
  • Champion 200991 is a 3500W dual fuel inverter generator with electric start and CARB compliance. It delivers clean, quiet, and stable power for home backup, RV, camping, and outdoor applications.
  • Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
    • Motor Strength: 5.0 HP High-Torque
    • Discharge Rate: 490 L/min (17.3 CFM)
    • Maximum Force: 175 PSI (12 Bar)
    • Tank Orientation: 60 Gallon Vertical
    • Technical Spec: R-15B Splash Pump
  • The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
    • Combined free air delivery of 51.6 CFM.
    • High pressure performance reaching 175 Psi.
    • Massive 120 gallon horizontal storage receiver.
    • Complete Advantage duplex alternating electrical control panels.
    • Runs on high efficiency 208V three phase.
  • The Champion ADVA-S33 industrial reciprocating air compressor eliminates plant pneumatic supply shortfalls, driving a powerful 15 HP motor configuration to run extensive downstream manufacturing tool networks seamlessly.
    • Delivers high capacity 50.1 air CFM.
    • Large 120 gallon horizontal storage receiver.
    • Maintains maximum 175 Psi working limits.
    • Runs on industrial 460V three phase.
    • Complete Advantage control package electrical systems.
  • Champion BDPL5Y Air Compressor: Extreme-duty 9HP diesel-powered compressor featuring the PL-Series pressure-lubricated pump, designed for off-level operation in remote field environments.
    • Engine Specs: 9.1 HP Yanmar Diesel
    • Pneumatic Supply: 614 L/min (21.7 CFM)
    • Compression Limit: 175 PSI (12 Bar)
    • Storage Build: 30 Gallon Horizontal
    • Industrial Spec: Pressure Lubrication System
  • Champion BER10 Air Compressor: Premium 10HP Evolution Series compressor combining reciprocating power with rotary-screw silence, featuring a sound-attenuating enclosure for point-of-use installation.
    • Drive Strength: 10.0 HP Evolution Quiet
    • Flow Performance: 965 L/min (34.1 CFM)
    • Operational Force: 175 PSI (12 Bar)
    • Vessel Size: 120 Gallon Horizontal
    • Acoustic Logic: 66 dBA Noise Level
  • The BR26 sits in Champion’s upper industrial reciprocating range, designed for facilities that need high-volume compressed air without moving to rotary screw systems.

    Its R-Series pump uses a robust mechanical design with:

    • Intercoolers between stages for efficiency
    • Heavy-duty crankshaft and bearings for long life
    • Disc valves for high airflow stability
    • Splash lubrication for simpler maintenance

    This makes it ideal for operations requiring consistent pressure under continuous load conditions.

  • The HDPL5-3K is designed for high-reliability operation in environments where downtime is not acceptable. Unlike standard splash-lubricated compressors, its pressure lubrication system continuously feeds oil to critical moving components, reducing friction and extending service intervals.

    This makes it especially effective for:

    • Long-duration pneumatic tool use in the field
    • Rough terrain construction sites
    • Remote infrastructure maintenance
    • Heavy equipment service operations

    Its balance of airflow and portability makes it a strong alternative to larger stationary systems when mobility is required.

  • The HDPL5-3Y is built for serious field duty, where compressors must operate reliably under vibration, dust, heat, and uneven terrain. Its pressure lubrication system continuously feeds oil to critical internal components, significantly improving durability compared to standard splash-lubricated compressors.

    The 30-gallon tank keeps the system compact for truck mounting, while still providing enough reserve air for impact tools, grinders, and intermittent blasting work.

    This makes it a strong choice for contractors who need true off-grid compressed air power with industrial-grade reliability.

  • The HDR5-8Y is built for true off-grid compressed air performance, eliminating dependency on electrical infrastructure. The R-Series pump is designed with heavy-duty internal components including intercooling, disc valves, and cast iron construction, ensuring stable airflow and long operational life.

    Its engine-driven design makes it ideal for service trucks and remote job sites, where reliability and mobility are more important than stationary high-volume output.

  • The HER10-12 is designed for facilities that need industrial-grade compressed air without the noise impact of traditional piston compressors. Its enclosed design allows it to be installed near production areas, reducing piping distance and pressure loss while improving system efficiency.

    The RP30D two-stage pump provides stable airflow and long service life, while the enclosure uses engineered airflow channels and cooling fans to manage heat buildup during continuous operation.

    This makes it ideal for:

    • Automotive workshops with multiple bays
    • Manufacturing and assembly facilities
    • CNC machining support systems
    • Production environments requiring low noise