Chicago Pneumatic
-
The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes:
- Lower operating temperature
- Reduced internal wear
- Improved air dryness (less condensation buildup)
- Longer service intervals
This makes it especially suitable for shops where the compressor runs frequently throughout the day.
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
Chicago Pneumatic RCP-1630G Air Compressor: High-output 16HP gasoline-powered service truck compressor featuring a Vanguard engine, designed to deliver professional-grade pneumatic power in remote field locations.
- Engine Specs: 16.0 HP Briggs & Stratton Vanguard
- Pneumatic Supply: 991 L/min (35.0 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
- Technical Spec: 12V Electric Start & Recoil Backup
-
Chicago Pneumatic RCP-4961VNS Air Compressor: Efficient 5HP vertical compressor featuring a 60-gallon tank, engineered for small-to-medium automotive shops requiring reliable air in a space-saving footprint.
- Drive Strength: 5.0 HP Single-Phase
- Flow Performance: 433 L/min (15.3 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Vessel Size: 60 Gallon Vertical
- Build Quality: Solid Cast Iron Two-Stage Pump
-
Chicago Pneumatic RCP-7581VS vertical reciprocating compressor resolves professional garage tool limits, forcing an exceptional volume of continuous high-pressure air through a space-saving footprint to eliminate single-phase circuit line lag.
- Supplies steady 25.3 CFM delivery rate.
- Space saving 80 gallon vertical tank.
- Robust 7.5 HP electric motor drive.
- Sustains 175 Psi peak tool pressure.
- Operates cleanly across 230V single phase.
-
Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments.
- Engine Specs: 11.0 HP Honda GX340
- Discharge Rate: 524 L/min (18.5 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 30 Gallon Horizontal
- Technical Logic: Fully Enclosed Belt Guard
-
The Chicago Pneumatic RCP-C1430G gasoline-powered compressor addresses remote industrial field maintenance constraints, leveraging a rugged 14 HP Kohler engine block to preserve high-pressure pneumatic tool paths without facility power drops.
- High torque 14 HP Kohler engine.
- Steady free air capacity of 25.3.
- Maximum system pressure of 175 Psi.
- Compact 30 gallon horizontal storage tank.
- Convenient integrated automated electric start ignition.
-
Chicago Pneumatic RCP-C7583VS: Industrial 7.5HP vertical system featuring an “Iron Series” pump and 3-phase motor for high-cycle automotive shop environments.
- Motor Specs: 7.5 HP 3-Phase
- Airflow Volume: 680 L/min (24.0 CFM)
- Pressure Peak: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- System Extra: Magnetic Starter Pre-Wired
