EMAX
-
The EGES1860ST is built for serious mobile air demand, especially where multiple pneumatic tools must run simultaneously. Its high CFM output allows it to support:
- Framing nailers and roofing tools
- Impact wrenches and air ratchets
- Light sandblasting setups
- Industrial maintenance tools in the field
Key performance strengths:
- High airflow for multi-tool operation
- Stable pressure under continuous jobsite load
- Engine-driven independence (no electrical supply needed)
- Low RPM pump reduces wear and heat buildup
-
The EGES24120T is designed for high-demand jobsite air systems, capable of running multiple pneumatic tools simultaneously. Its major advantage is the combination of:
- Very high airflow (near 60 CFM class)
- Large 120-gallon storage buffer
- Gas engine independence (no electrical supply required)
This makes it suitable for operations where multiple technicians are using air tools at once.
Typical applications include:
- Heavy construction and framing crews
- Roadwork and infrastructure maintenance
- Industrial field service trucks
- Sandblasting (light to medium duty setups)
- Large multi-tool pneumatic systems
-
The EI07V080V1 is built for serious shop air demand, offering significantly higher airflow than typical 7.5 HP compressors. Its strength comes from:
- High airflow (~31 CFM) suitable for multiple pneumatic tools
- Two-stage compression for improved efficiency and cooler operation
- Pressure-lubricated pump system for longer lifespan
- Large 80-gallon tank to stabilize pressure during peak demand
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication and welding shops
- Maintenance facilities
- Multi-tool workshop environments
It is not intended for continuous heavy-duty industrial processes like large-scale sandblasting or production-line compressed air systems.
-
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
- Stable airflow without pressure spikes
- Lower noise compared to reciprocating compressors
- Reduced vibration and mechanical wear
- Better efficiency in constant-demand environments
It is especially useful where air demand never fully stops, such as:
- Small manufacturing lines
- CNC machines (light duty)
- Packaging equipment
- Continuous workshop air systems
- Multi-tool pneumatic stations
-
The ERI0050801 is designed for constant air demand environments, where piston compressors would normally cycle on and off. Instead, the rotary screw system:
- Produces steady, non-pulsating airflow
- Eliminates frequent start/stop cycling
- Reduces mechanical wear and heat stress
- Improves efficiency in long runtime applications
This makes it ideal for:
- Small manufacturing facilities
- Continuous workshop air systems
- Packaging and assembly lines
- CNC light-duty operations
- Multi-tool pneumatic stations
-
The ERIK150003 is designed for continuous industrial air demand, where piston compressors would fail due to cycling limits and heat buildup. The rotary screw system provides:
- Constant airflow without pressure dips
- No start/stop cycling (reduces wear significantly)
- High efficiency at long runtime
- Much quieter operation than reciprocating compressors
Its ~60 CFM output allows it to support:
- Multiple CNC machines
- Automated production equipment
- Packaging lines
- Multi-user workshop air systems
- Continuous pneumatic tooling
-
The ES10V080V1 is designed for high-output shop environments where noise reduction is important. Compared to standard 10 HP piston compressors, it offers:
- Much lower perceived noise (intake silencing system)
- Stable airflow for multiple pneumatic tools
- Reduced vibration due to low-RPM pump operation
- Strong 38 CFM output suitable for demanding shop tasks
Typical applications include:
- Automotive repair shops
- Tire and service centers
- Fabrication and welding shops
- Maintenance facilities
- Multi-tool pneumatic workstations
-
The ESP05V080I1PK is designed for quiet, stable, and clean compressed air delivery in professional environments.
Typical applications:
- Automotive workshops
- Tire and detailing shops
- Small fabrication facilities
- Paint and finishing systems
- Light industrial maintenance
- Shops requiring quiet operation indoors
-
The ESP10A080V1 is designed for high-output workshop environments where noise control matters. Compared to standard 10 HP compressors, its key advantage is not only airflow but also:
- Much lower intake noise (the loudest part of piston compressors)
- Stable high-volume airflow (~38 CFM class)
- Reduced vibration due to low-RPM pump design
- Better suitability for indoor or attached-shop installations
-
The ESP10A120V1 is designed for high-demand shops where airflow stability and reduced noise are equally important. Compared to 80-gallon versions, the key advantage is its larger air reservoir, which provides:
- Longer tool runtime before compressor restart
- Reduced cycling frequency (less wear on motor and pump)
- More stable pressure during peak air demand
- Better performance for multiple simultaneous tools
Typical applications include:
- Automotive service centers
- Tire and repair shops
- Fabrication and welding facilities
- Paint and finishing systems (moderate duty)
- Multi-user pneumatic tool stations
-
The ESP10D120V3 is designed for high-demand industrial environments where multiple pneumatic tools operate simultaneously. Compared to single-phase Silent Air models, the 3-phase configuration provides:
- Smoother power delivery and higher efficiency
- Better performance under continuous load
- Reduced electrical stress and heat buildup
- Improved suitability for long runtime industrial systems
Typical applications include:
- Fabrication workshops
- Automotive service centers with multiple bays
- Manufacturing support systems
- Paint and finishing lines
- Multi-tool pneumatic stations
-
EMAX ESP10D240V3: The flagship of the dual-pump series, this 3-phase 240-gallon unit offers the highest storage capacity and performance for heavy-duty industrial automation.
- Motor Specs: 10.0 HP 3-Phase
- Flow Capacity: 962 L/min (34 CFM @ 100 PSI)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Size: 240 Gallon Horizontal
- Elite Module: Premium Silent Air Baffle System
