Out of a total of 659 products:
$2,444.00
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
It is especially useful where air demand never fully stops, such as:
In Stock
EMAX ERI0050001 Industrial Rotary Screw Compressor is presented for equipment buyers comparing Compressor. Review the listed configuration, dimensions, capacity, power requirements, included components and operating limits against the current model-specific documentation before purchase.
For projects in the United States, Canada and Asia, confirm local voltage and frequency, applicable emissions or safety requirements, freight access, spare-parts availability and qualified service support. Product configurations can vary by market, so verify the exact model number and current datasheet for the destination.
Compare this listing with related Compressor. When evaluating EMAX ERI0050001 Industrial Rotary Screw Compressor, match the published specifications to the real duty cycle, site conditions and maintenance resources.
For safety and compliance context relevant to this category, see DOE compressed air systems guidance. Related: Industrial Air Compressor: 9 Best Buying Tips.
The EMAX ERI0050001 is a compact industrial rotary screw air compressor designed for facilities that require continuous airflow, low noise operation, and high duty-cycle performance. Unlike piston compressors, this model uses a rotary screw air-end system, making it suitable for 100% duty cycle applications where air demand is constant.
It is part of the EMAX Industrial Rotary Screw Series, featuring a soundproof steel cabinet, a 5 HP industrial electric motor, and a belt-driven oil-injected rotary screw air-end. The system is engineered for long service life, stable pressure output, and reduced maintenance requirements compared to reciprocating compressors.
This unit delivers approximately 19.4 CFM at 100 PSI with a maximum pressure of 145 PSI, making it ideal for small industrial plants, production lines, and workshops requiring continuous compressed air supply.
Built to run continuously without overheating under proper maintenance.
Smooth, steady airflow with minimal pressure fluctuation.
Significantly quieter than piston-based compressors.
Smart controller enables scheduling, monitoring, and system optimization.
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
Stable airflow without pressure spikes
Lower noise compared to reciprocating compressors
Reduced vibration and mechanical wear
Better efficiency in constant-demand environments
It is especially useful where air demand never fully stops, such as:
Small manufacturing lines
CNC machines (light duty)
Packaging equipment
Continuous workshop air systems
Multi-tool pneumatic stations
Before ordering the EMAX ERI0050001 – Industrial Rotary Screw Compressor from EMAX, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.
CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.
For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.
| Specification | Details |
|---|---|
| Model | EMAX ERI0050001 |
| Type | Rotary Screw Air Compressor |
| Motor Power | 5 HP |
| Air Delivery | ~19.4 CFM @ 100 PSI |
| Max Pressure | 145 PSI |
| Pump Type | Oil-injected rotary screw |
| Drive Type | Belt-driven |
| Duty Cycle | 100% continuous |
| Tank | Not included (standalone cabinet unit) |
| Cooling | Air/oil radiator + aftercooler |
| Application | Industrial / Production / Workshop |
The HPL15D-24 is designed for high-volume compressed air infrastructure, not small shop use. The duplex system allows both pumps to operate together during peak demand or alternate under lighter loads, improving efficiency and extending service life.
The PL-Series pressure lubrication system is a key upgrade over splash-lubricated designs, continuously feeding oil under pressure to bearings and internal components. This significantly improves durability in environments with:
The large 240-gallon tank stabilizes system pressure, reducing compressor cycling and ensuring consistent air delivery to multiple production stations.
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
994162 
75306 
991130 
991163 
941708 
75314
Reviews
There are no reviews yet.