Dewalt DXCMV5018055 – Air Compressor

Description

DEWALT DXCMV5018055 Air Compressor – 5 HP 80 Gallon Two-Stage Stationary Electric Compressor

The DEWALT DXCMV5018055 is a heavy-duty 80-gallon vertical stationary air compressor designed for professional workshops, automotive service centers, and light industrial applications requiring high airflow, stable pressure, and continuous-duty performance.

It features a 5 HP industrial electric induction motor, a two-stage cast iron, oil-lubricated reciprocating pump, and a large 80-gallon ASME-certified air receiver tank, making it suitable for multi-tool shop environments where consistent compressed air is essential.

This model delivers approximately 17.9 CFM at 100 PSI (and around 17 CFM at 175 PSI), placing it in the high-output 5 HP class for serious workshop use.

Key Features

• 5 HP heavy-duty industrial electric motor (230V, single-phase)
• Rugged two-stage cast iron compressor pump
• Air delivery: ~17.9 CFM @ 100 PSI
• Maximum pressure: 175 PSI
• Large 80-gallon ASME-certified vertical steel tank
• Belt-drive system for lower RPM and longer pump life
• Integrated magnetic motor starter for safe operation
• High-efficiency flywheel and cooling fin design
• Oil-lubricated system with sight glass for maintenance control
• Designed for continuous workshop and light industrial duty

Performance Overview

The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:

• Reduce pressure drops during tool use
• Support multiple intermittent air tools
• Improve recovery time compared to smaller compressors
• Maintain stable pressure during workshop demand peaks

Typical applications include:

• Automotive repair shops
• Tire service centers
• Light fabrication and metalworking
• Maintenance departments
• Painting and detailing operations

It is not intended for continuous heavy-demand tools such as large industrial grinders or sandblasting systems.

Advantages

Two-Stage Cast Iron Pump

Improves efficiency, reduces heat, and extends compressor life.

High Airflow Output (17.9 CFM)

Strong performance for multiple simultaneous workshop tools.

Large 80-Gallon Tank

Stabilizes pressure and reduces cycling frequency.

Industrial Duty Design

Built for long service life in professional environments.

Ideal Applications

• Automotive workshops
• Light industrial production
• Maintenance facilities
• Metal fabrication shops
• Pneumatic tool systems
• Paint and finishing work

Dewalt DXCMV5018055 – Air Compressor: Buying Considerations

The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:

Reduce pressure drops during tool use
Support multiple intermittent air tools
Improve recovery time compared to smaller compressors
Maintain stable pressure during workshop demand peaks

Before ordering the Dewalt DXCMV5018055 – Air Compressor from Dewalt, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.

Looking for the Dewalt DXCMV5018055? This model is a popular choice among buyers who need dependable performance from the Dewalt DXCMV5018055. Our team frequently recommends the Dewalt DXCMV5018055 for its balance of build quality, reliability, and value in daily industrial use.