ADVA-D38 Subtotal: $11,899.00
Dewalt DXCMV5018055 – Air Compressor
$1,002.00
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
- Reduce pressure drops during tool use
- Support multiple intermittent air tools
- Improve recovery time compared to smaller compressors
- Maintain stable pressure during workshop demand peaks
In Stock
Free Worldwide Shipping
|
Estimated delivery in 14–21 business days
Description
DEWALT DXCMV5018055 Air Compressor – 5 HP 80 Gallon Two-Stage Stationary Electric Compressor
The DEWALT DXCMV5018055 is a heavy-duty 80-gallon vertical stationary air compressor designed for professional workshops, automotive service centers, and light industrial applications requiring high airflow, stable pressure, and continuous-duty performance.
It features a 5 HP industrial electric induction motor, a two-stage cast iron, oil-lubricated reciprocating pump, and a large 80-gallon ASME-certified air receiver tank, making it suitable for multi-tool shop environments where consistent compressed air is essential.
This model delivers approximately 17.9 CFM at 100 PSI (and around 17 CFM at 175 PSI), placing it in the high-output 5 HP class for serious workshop use.
Key Features
- 5 HP heavy-duty industrial electric motor (230V, single-phase)
- Rugged two-stage cast iron compressor pump
- Air delivery: ~17.9 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- Large 80-gallon ASME-certified vertical steel tank
- Belt-drive system for lower RPM and longer pump life
- Integrated magnetic motor starter for safe operation
- High-efficiency flywheel and cooling fin design
- Oil-lubricated system with sight glass for maintenance control
- Designed for continuous workshop and light industrial duty
Performance Overview
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
- Reduce pressure drops during tool use
- Support multiple intermittent air tools
- Improve recovery time compared to smaller compressors
- Maintain stable pressure during workshop demand peaks
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication and metalworking
- Maintenance departments
- Painting and detailing operations
It is not intended for continuous heavy-demand tools such as large industrial grinders or sandblasting systems.
Advantages
Two-Stage Cast Iron Pump
Improves efficiency, reduces heat, and extends compressor life.
High Airflow Output (17.9 CFM)
Strong performance for multiple simultaneous workshop tools.
Large 80-Gallon Tank
Stabilizes pressure and reduces cycling frequency.
Industrial Duty Design
Built for long service life in professional environments.
Ideal Applications
- Automotive workshops
- Light industrial production
- Maintenance facilities
- Metal fabrication shops
- Pneumatic tool systems
- Paint and finishing work
For safety and compliance context relevant to this category, see DOE compressed air systems guidance. Related: Industrial Air Compressor: 9 Best Buying Tips.
Dewalt DXCMV5018055 – Air Compressor: Buying Considerations
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
Reduce pressure drops during tool use
Support multiple intermittent air tools
Improve recovery time compared to smaller compressors
Maintain stable pressure during workshop demand peaks
Before ordering the Dewalt DXCMV5018055 – Air Compressor from Dewalt, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.
What to Check Before You Buy
- Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
- Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
- Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
- Review noise rating if the compressor will run in an occupied or noise-sensitive space.
Does tank size matter more than CFM for a shop air compressor?
CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.
For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.
Looking for the Dewalt DXCMV5018055? This model is a popular choice among buyers who need dependable performance from the Dewalt DXCMV5018055. Our team frequently recommends the Dewalt DXCMV5018055 for its balance of build quality, reliability, and value in daily industrial use.
| Specification | Details |
|---|---|
| Model | DEWALT DXCMV5018055 |
| Type | Stationary Electric Air Compressor |
| Motor Power | 5 HP |
| Pump Type | Two-stage cast iron, oil-lubricated |
| Air Delivery | ~17.9 CFM @ 100 PSI |
| Max Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Voltage | 230V single-phase |
| Drive Type | Belt-driven |
| Duty Cycle | Continuous workshop use |
| Application | Automotive / Light industrial |
You may also like…
-
Despite being a powerful shop compressor, the 418VL is known for relatively quiet operation compared to lighter-duty high-RPM compressors. The low-speed pump design reduces noise, vibration, and heat buildup, which helps extend service life and improves efficiency during long operating cycles.
Its 80-gallon tank also helps stabilize air pressure, reducing frequent motor cycling during heavy tool use.
-
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
-
The Champion HR15-12 is built for facilities that require reliable compressed air throughout multiple shifts. Its R-40 pump offers greater displacement than standard R-30 models while operating at lower RPM, resulting in:
- Lower operating temperatures
- Reduced vibration and noise
- Extended bearing and component life
- Improved energy efficiency
- Longer maintenance intervals
The large 120-gallon tank helps stabilize air pressure during peak demand and reduces compressor cycling, improving overall system efficiency.
-
Chicago Pneumatic RCP-7581VS vertical reciprocating compressor resolves professional garage tool limits, forcing an exceptional volume of continuous high-pressure air through a space-saving footprint to eliminate single-phase circuit line lag.- Supplies steady 25.3 CFM delivery rate.
- Space saving 80 gallon vertical tank.
- Robust 7.5 HP electric motor drive.
- Sustains 175 Psi peak tool pressure.
- Operates cleanly across 230V single phase.
-
The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.- Combined free air delivery of 51.6 CFM.
- High pressure performance reaching 175 Psi.
- Massive 120 gallon horizontal storage receiver.
- Complete Advantage duplex alternating electrical control panels.
- Runs on high efficiency 208V three phase.
-
The DXCM201 is designed around a high-pressure 200 PSI system, which gives it a key advantage: it can store more usable air in the tank compared to lower-pressure 20-gallon compressors. This translates into longer tool runtime before the compressor needs to refill.
However, its real working strength is the 6.2 SCFM at 90 PSI, which places it in the light-to-medium duty class:
- Good for impact wrenches (intermittent use)
- Suitable for air ratchets and nail guns
- Works for tire inflation and shop maintenance
- Not ideal for continuous high-demand tools like grinders or sandblasting
Related products
-
BelAire 6G3HV Air Compressor: Compact 3HP vertical unit designed to maximize shop floor space while providing reliable pneumatic power for small-scale automotive tasks.- Motor Efficiency: 3HP High-Efficiency
- Pneumatic Supply: 320 L/min (11.3 CFM)
- Force Rating: 135 PSI (9.3 Bar)
- Tank Orientation: 60 Gallon Vertical
- Build Design: Solid Cast Iron
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
Reviews
There are no reviews yet.