Campbell Hausfeld CE7051 – 5 HP Two-Stage Air Compressor

Description

Campbell Hausfeld CE7051 Air Compressor – 5 HP Two-Stage Industrial Air Compressor (80 Gallon)

The Campbell Hausfeld CE7051 is a commercial-grade two-stage stationary air compressor designed for automotive shops, fabrication facilities, and industrial maintenance environments that require reliable and consistent compressed air. It features a 5 HP electric motor, a rugged cast iron two-stage pump, and an 80-gallon ASME-certified tank, making it suitable for continuous-duty professional applications.

This model delivers approximately 16.4–17.2 CFM at 90–175 PSI and reaches a maximum pressure of 175 PSI, providing enough airflow to run multiple air tools in a professional workshop setting.

Key Features

• 5 HP industrial electric motor (208–230V or 460V, three-phase)
• Heavy-duty two-stage cast iron pump
• Large 80-gallon ASME-certified tank
• Air delivery: ~16.4 CFM @ 175 PSI
• Maximum pressure: 175 PSI
• Belt-driven low-RPM design for durability
• Magnetic motor starter included
• Built for heavy commercial and industrial duty cycles
• Long-life pump rated for extended operational hours

Performance Overview

The CE7051 is built for serious shop use, not light-duty homeowner applications. Its two-stage pump design compresses air more efficiently, reducing heat buildup and improving long-term durability compared to single-stage units.

With roughly 16+ CFM output, it can comfortably support:

• Impact wrenches (intermittent use)
• Air ratchets
• Paint guns (mid-duty setups)
• Tire service tools
• Small blasting or fabrication tasks (with airflow management)

It is not designed for high-demand continuous tools like large sandblasters or industrial spray lines.

Ideal Applications

• Automotive repair shops
• Tire and wheel service centers
• Metal fabrication workshops
• Light manufacturing facilities
• CNC support air systems
• General industrial maintenance

Campbell Hausfeld CE7051 – 5 HP Two-Stage Air Compressor: Buying Considerations

Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.

Power Configuration: 5.0 HP Two-Stage
Volume Delivery: 495 L/min (17.5 CFM)
Compression Limit: 175 PSI (12 Bar)
Tank Orientation: 80 Gallon Vertical
Build Quality: 15,000 Hour Pump Rating

Before ordering the Campbell Hausfeld CE7051 – 5 HP Two-Stage Air Compressor from Campbell Hausfeld, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.

Total Cost of Ownership

The purchase price of the Campbell Hausfeld CE7051 – 5 HP Two-Stage Air Compressor is only part of the real cost of owning this equipment. Factor in routine maintenance parts, consumables specific to the Compressor category, fuel or energy use over the equipment’s service life, and the cost of downtime if a failure happens during a critical job. Equipment with a lower purchase price but weaker local parts availability or a shorter warranty period can end up costing more over three to five years than a model with a higher upfront price and stronger support.

Warranty and Support

Confirm the specific warranty terms Campbell Hausfeld offers on this model, including coverage length, what is and is not covered (wear parts are frequently excluded), and whether the warranty is transferable if the equipment is resold. Check whether authorized service is available in your region before an issue comes up, rather than after – parts and qualified technician availability varies significantly by location and can be the deciding factor between two otherwise comparable machines.

Keep the original purchase documentation, serial number, and any commissioning or acceptance records together – this documentation is typically required to make a warranty claim and simplifies any future resale or insurance process.