Champion HR30D-24 Air Compressor – 30HP R-Series

Description

Champion HR30-24 Air Compressor – 30 HP R-Series Industrial Two-Stage Air Compressor (240 Gallon)

The Champion HR30-24 Air Compressor is a heavy-duty R-Series industrial reciprocating compressor engineered for large manufacturing plants, automotive production facilities, fabrication workshops, and centralized compressed air systems requiring very high airflow and continuous-duty reliability. It is powered by a 30 HP three-phase electric motor and equipped with Champion’s rugged R-70 two-stage cast iron compressor pump, mounted on a large 240-gallon ASME-certified horizontal air receiver tank.

Designed for high-demand industrial environments, the HR30-24 delivers approximately 200–205 CFM at 175 PSI, making it one of the highest-output single-frame R-Series systems available. This compressor is built for 24/7 operation in multi-shift production facilities where compressed air is critical to uptime and productivity.

Key Features

• 30 HP industrial three-phase electric motor
• Heavy-duty Champion R-70 two-stage cast iron compressor pump
• Air delivery: ~200–205 CFM @ 175 PSI
• Maximum operating pressure: 175 PSI
• Large 240-gallon ASME-certified horizontal air receiver tank
• Low-speed pump design (~907 RPM) for reduced wear and heat
• Splash-lubricated crankcase system for proven reliability
• High-efficiency disc valve technology
• Deep finned intercoolers for improved cooling
• Loadless centrifugal unloading system for safe starting
• Heavy-duty industrial control panel (configuration dependent)
• Continuous-duty operation for demanding environments

R-Series Advantages

Heavy-Duty Cast Iron Construction

Built for long service life under continuous industrial loads.

High Airflow Capacity

Delivers ~200+ CFM, suitable for large-scale production facilities.

Low-Speed Efficiency Design

Approximately 907 RPM operation reduces wear and improves longevity.

Proven Industrial Reliability

Widely used in manufacturing environments where downtime is costly.

Ideal Applications

• Manufacturing plants
• Automotive production facilities
• CNC machining operations
• Metal fabrication workshops
• Industrial maintenance departments
• Packaging and processing plants
• Large assembly lines
• Central compressed air systems

Champion HR30D-24 Air Compressor – 30HP R-Series: Buying Considerations

The HR30-24 is designed for facilities that need plant-wide compressed air distribution rather than localized shop use. Its R-70 pump platform is optimized for low RPM operation, which improves long-term durability by reducing:

Mechanical stress on bearings and crankshaft
Heat buildup during continuous operation
Vibration and structural fatigue
Maintenance frequency over time

The 240-gallon receiver tank provides substantial air storage, helping stabilize pressure during peak demand and reducing compressor cycling. This is especially important in environments where multiple machines draw air simultaneously.

Before ordering the Champion HR30D-24 Air Compressor – 30HP R-Series from Champion, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.