Cam Spray 1000WM/SS – Electric Cold Water Wall-Mount PW – 1000 PSI, 2.2 GPM

Description

Cam Spray 1000WM/SS – Electric Cold Water Wall-Mount Pressure Washer (1000 PSI, 2.2 GPM)

The Cam Spray 1000WM/SS is a commercial wall-mounted electric cold water pressure washer designed for fixed installation in workshops, wash bays, maintenance rooms, and industrial cleaning stations where reliability, space efficiency, and long service life are more important than high-pressure output.

It is built around a 1.5 HP industrial TEFC electric motor, an industrial triplex plunger pump with ceramic plungers and stainless steel valves, and a stainless steel wall-mount frame with protective cover, making it suitable for demanding daily-use environments.

Key Features

• 1000 PSI operating pressure (factory set)
• 2.2 GPM flow rate for steady rinsing performance
• 1.5 HP totally enclosed fan-cooled (TEFC) electric motor (120V, 15A)
• Industrial triplex plunger pump with ceramic plungers and stainless-steel valves
• Wall-mounted steel or stainless-steel frame with protective cover
• Dual chemical injection system for detergent flexibility
• Quick-connect spray tips (0°, 15°, 25°, 40° + soap)
• 50 ft high-pressure hose with trigger gun included

Typical Applications

• Automotive wash bays and service centers
• Industrial maintenance facilities
• Food processing and hygiene-sensitive areas
• Equipment cleaning stations
• Kennels, farms, and animal facilities
• Workshop floor and machinery cleaning

Advantages

Wall-Mounted Industrial Design

Keeps the unit fixed, organized, and ready for daily use in wash stations.

Triplex Pump Durability

More serviceable and longer-lasting than consumer axial pumps.

Dual Chemical Injection

Allows switching between detergents for different cleaning tasks.

Stable 2.2 GPM Flow

Provides consistent rinsing performance for maintenance cleaning workflows.

Limitations

• Not intended for heavy surface stripping or concrete preparation
• Lower PSI compared to industrial gas pressure washers (2000–4000 PSI range)
• Requires fixed installation (not portable)

Cam Spray 1000WM/SS – Electric Cold Water Wall-Mount PW – 1000 PSI, 2.2 GPM: Buying Considerations

The 1000WM/SS is designed for controlled cleaning rather than high-impact stripping. At 1000 PSI with 2.2 GPM flow, it emphasizes:

Strong rinsing capability rather than cutting power
Safe cleaning for equipment, vehicles, and facility surfaces
Consistent performance during long daily use cycles
Reduced fatigue compared to handheld portable washers

Because it is wall-mounted, it also improves workflow efficiency by keeping hoses, wand, and controls permanently accessible in one fixed cleaning station.

Before ordering the Cam Spray 1000WM/SS – Electric Cold Water Wall-Mount PW – 1000 PSI, 2.2 GPM from Cam Spray, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Start with the surface and contaminant being cleaned rather than the maximum pressure rating – too much pressure can damage softer surfaces.
• Use flow rate (GPM), not just pressure (PSI), to estimate realistic cleaning productivity – both factor into total cleaning power.
• Match every nozzle and accessory to the machine's rated pressure and flow to avoid damage or reduced effectiveness.
• Confirm water supply, hose length losses, and detergent compatibility before relying on the machine for a specific job.

Is higher PSI always better for a pressure washer?

No – PSI needs to match the surface being cleaned. Excessive pressure can damage wood, vehicle paint, or soft masonry. GPM (flow rate) often matters more than PSI for rinsing speed and overall cleaning productivity on large areas.

For sizing help across the full Pressure Washer category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.