Your wishlist is empty.
CUB-17ARGBYLA10
1 × $1,849.00 
CUB-34CBA2CS710
1 × $3,009.00 
3312D
1 × $4,879.00 
3112D
1 × $5,424.00 Subtotal: $15,161.00
Out of a total of 570 products:
$399.00
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
It is not intended for continuous tools like grinders or sandblasting equipment.
In Stock
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
It is not intended for continuous tools like grinders or sandblasting equipment.
| Specification | Details |
|---|---|
| Model | DEWALT DXCM271 |
| Tank Capacity | 27 Gallons |
| Max Pressure | 200 PSI |
| Pump Type | Oil-free single-stage |
| Air Delivery | 5.1 SCFM @ 90 PSI |
| Voltage | 120V single-phase |
| Duty Cycle | Light to medium duty |
| Application | Garage / DIY / Light workshop |
The EGES24120T is designed for high-demand jobsite air systems, capable of running multiple pneumatic tools simultaneously. Its major advantage is the combination of:
This makes it suitable for operations where multiple technicians are using air tools at once.
Typical applications include:
The Champion HR20D-25 is designed for facilities where compressed air is a critical utility powering multiple production systems simultaneously. Its duplex configuration provides operational flexibility:
The R-70 pump design operates at low RPM, reducing internal heat buildup and extending bearing and piston life. The large 250-gallon receiver tank helps stabilize pressure fluctuations, reducing cycling frequency and improving overall efficiency.
The Champion HR7D-12 is built for environments where consistent airflow and operational redundancy are important. The duplex configuration allows:
The R-30 pumps are designed for low-RPM operation, which helps reduce internal heat, vibration, and long-term wear—making the system highly reliable for daily industrial use.
The BR26 sits in Champion’s upper industrial reciprocating range, designed for facilities that need high-volume compressed air without moving to rotary screw systems.
Its R-Series pump uses a robust mechanical design with:
This makes it ideal for operations requiring consistent pressure under continuous load conditions.
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
Reviews
There are no reviews yet.