JET J-7040M-4 Horizontal Mitering Bandsaw – 10x16in, 2HP, 460V

Description

JET J-7040M-4 Horizontal Mitering Bandsaw – 10in x 16in, 2 HP, 460V

The JET J-7040M-4 Horizontal Mitering Bandsaw is a heavy-duty industrial metal cutting saw designed for fabrication shops, steel service centers, and manufacturing environments requiring high-performance straight and angled cutting. Powered by a 2 HP motor and configured for 460V, 3-phase industrial power, this model is built for continuous-duty operation in demanding production settings.

Its swivel mitering head allows precise angle cuts without repositioning the workpiece, improving efficiency and accuracy in repetitive fabrication tasks. Combined with a rigid cast iron frame and geared transmission system, the J-7040M-4 delivers stable, vibration-free cutting performance on steel, stainless steel, aluminum, pipe, and structural materials.

Key Features

• Powerful 2 HP industrial motor
• 460V, 3-phase industrial power configuration
• Large 10 x 16 inch cutting capacity
• Swivel head for miter cuts up to ~45°
• Geared drive system for high torque performance
• Hydraulic downfeed for controlled cutting pressure
• Heavy-duty cast iron saw frame for rigidity
• Integrated coolant system for blade cooling
• Industrial blade guide system for accuracy
• Adjustable material stop for production cutting
• Designed for continuous industrial operation

Technical Highlights

• Cutting capacity: 10″ round / 10 x 16″ rectangle
• Motor power: 2 HP
• Voltage: 460V, 3-phase
• Drive system: Gear-driven (oil bath gearbox)
• Feed system: Hydraulic downfeed
• Miter capability: Swivel head (approx. 45° range)
• Blade type: Industrial bi-metal bandsaw blade

Applications

• Structural steel fabrication
• Pipe and tube cutting
• Manufacturing facilities
• Machine shops
• Steel service centers
• Heavy industrial maintenance
• Production metal cutting environments

Why this version matters (J-7040M-4)

The -4 variant is essentially the industrial 460V configuration, making it better suited for:

• Factory production lines
• Heavy-duty continuous operation
• Higher efficiency electrical setups
• Reduced electrical load compared to single-phase systems

JET J-7040M-4 Horizontal Mitering Bandsaw – 10x16in, 2HP, 460V: Buying Considerations

The JET J-7040M-4 horizontal mitering bandsaw features a 2 HP motor, 460V 3-phase power, 10 x 16 inch cutting capacity, swivel miter head, hydraulic downfeed, and geared drive system. Ideal for industrial fabrication, steel cutting, and production environments.

Before ordering the JET J-7040M-4 Horizontal Mitering Bandsaw – 10x16in, 2HP, 460V from JET, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Measure the largest round, rectangular, or bundle cross-section that will regularly be cut – this determines the minimum required throat capacity.
• Match blade pitch and speed (SFM) to the material type and section thickness being cut most often.
• Compare manual, gravity-feed, and hydraulic-feed models against the expected production volume.
• Check coolant delivery, blade guide condition, and vise rigidity – these affect cut accuracy as much as the saw's rated capacity.

What blade pitch should be used for cutting structural steel tubing?

Blade pitch selection depends on wall thickness – as a general rule, at least 3 teeth should be engaged in the material at all times. Thin-wall tubing needs a finer pitch than solid bar stock of the same outer dimension to avoid stripped teeth.

For sizing help across the full Band Saws category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.

Total Cost of Ownership

The purchase price of the JET J-7040M-4 Horizontal Mitering Bandsaw – 10x16in, 2HP, 460V is only part of the real cost of owning this equipment. Factor in routine maintenance parts, consumables specific to the Band Saws category, fuel or energy use over the equipment’s service life, and the cost of downtime if a failure happens during a critical job. Equipment with a lower purchase price but weaker local parts availability or a shorter warranty period can end up costing more over three to five years than a model with a higher upfront price and stronger support.

Warranty and Support

Confirm the specific warranty terms JET offers on this model, including coverage length, what is and is not covered (wear parts are frequently excluded), and whether the warranty is transferable if the equipment is resold. Check whether authorized service is available in your region before an issue comes up, rather than after – parts and qualified technician availability varies significantly by location and can be the deciding factor between two otherwise comparable machines.

Keep the original purchase documentation, serial number, and any commissioning or acceptance records together – this documentation is typically required to make a warranty claim and simplifies any future resale or insurance process.