JET DSAN4-1 Dual Station Abrasive Notcher – 230V, 1PH
$1,666.00
The JET DSAN4-1 Dual Station Abrasive Notcher is a 230V single-phase industrial tube notching machine designed for fast, accurate coping of structural tubing. Ideal for fabrication shops, handrail production, and high-volume metal fabrication environments.
In Stock
2-Day Shipping
|
All orders are processed and dispatched within 2 days
Description
JET DSAN4-1 Dual Station Abrasive Notcher – 230V, 1PH
The JET DSAN4-1 is a heavy-duty dual-station abrasive tube notcher designed for high-efficiency fabrication environments where speed, repeatability, and precision tube fitting are required.
Unlike single-station notchers, this system allows two operators or two workflows simultaneously, significantly increasing throughput in production fabrication shops. It is commonly used for structural tubing, handrails, frames, and custom metal fabrication where consistent fish-mouth cuts are required.
Powered by a 230V, single-phase motor, the DSAN4-1 is suitable for industrial shops that do not have 3-phase power but still require production-level performance.
Key Features
- Dual-station design for high production throughput
- Heavy-duty abrasive belt system for fast material removal
- 230V single-phase power (shop-friendly electrical requirement)
- Adjustable tube angles for precise notch alignment
- Designed for round and square tubing applications
- Rugged industrial frame for vibration-free operation
- Quick-adjust fixture system for repeat cuts
- Ideal for high-volume fabrication environments
Typical Technical Highlights
- Motor: 230V, 1-phase industrial motor
- Operation: Dual-station abrasive notching system
- Material capacity: Structural tube and pipe (varies by fixture setup)
- Cut type: Fish-mouth / cope / saddle notches
- Drive system: Belt-driven abrasive contact wheel system
- Construction: Heavy-duty steel fabrication frame
Applications
- Structural steel fabrication
- Handrail and guardrail manufacturing
- Pipe fitting and tube copes
- Custom metal framing
- Automotive and chassis fabrication
- Production welding preparation
Why shops use it
The DSAN4-1 is designed for production efficiency, not just precision. Compared to manual notchers:
- Dramatically reduces coping time
- Improves weld fit-up consistency
- Enables repeat production runs
- Supports dual-operator workflows
| Brand | Jet |
|---|---|
| Manufacturer’s Warranty | 48 months parts / 48 months labor |
| Ship Weight | 480.0 lbs |
| Max. Cutting Capacity Diameter | 2.5 |
| Product Weight | 545 lb |
| Dimensions L x W x H (in.) | 48 x 24 x 45 |
You may also like…
-
The Edwards HAT1010 is a 10-ton hydraulic tube and pipe bender powered by 230V single-phase electricity. It features a portable hydraulic power unit, 180° bending capacity, and supports pipe, tube, and square stock for industrial fabrication and metalworking applications. -
The Edwards HAT1020 10-ton hydraulic bender is a 230V 3-phase industrial tube and pipe bending system designed for heavy-duty fabrication. It delivers precise, repeatable bends up to 180° for pipe, tube, and structural steel applications.
-
The Cyclone Electric Conduit Bender 115V 15A is a heavy-duty production conduit bending machine designed for 1/2" to 2" EMT, IMC, and rigid conduit. It features automatic bending, horizontal and vertical operation, and repeatable precision for industrial electrical installations.
-
The Edwards HAT1020 is a 10-ton hydraulic tube and pipe bender powered by 230V 3-phase electricity. It features a portable hydraulic power unit, up to 180° bending capability, and is designed for industrial fabrication, structural tubing, and production metalworking applications.
-
The JET ESN-40 Electric Pipe Notcher is a heavy-duty Schedule 40 pipe notching machine designed specifically for rapid, repeatable 90-degree copes in fabrication environments. It is widely used in structural steel shops, handrail fabrication, and metal frame production where consistent tube-to-tube joints are required.
-
The Edwards HAT1000 is a 10-ton hydraulic tube and pipe bender designed for precision metal bending in fabrication shops, HVAC work, automotive fabrication, and industrial metalworking applications.
Related products
-
Powered by the M18 FUEL platform, it uses a high-torque brushless motor and intelligent electronics to deliver fast, consistent threading performance up to 2-inch pipe in black iron, stainless steel, and rigid metal conduit (RMC).
-
The METALpro MP9000 is a 12-ton hydraulic metal bender system designed for fabrication work involving tubing, pipe, and light structural steel bending. It is commonly positioned as a shop-grade alternative to manual benders, offering repeatable, controlled bends with hydraulic force.
-
The JET ESN-40 Electric Pipe Notcher is a heavy-duty Schedule 40 pipe notching machine designed specifically for rapid, repeatable 90-degree copes in fabrication environments. It is widely used in structural steel shops, handrail fabrication, and metal frame production where consistent tube-to-tube joints are required.
-
The Edwards HAT1020 10-ton hydraulic bender is a 230V 3-phase industrial tube and pipe bending system designed for heavy-duty fabrication. It delivers precise, repeatable bends up to 180° for pipe, tube, and structural steel applications.
-
The Edwards HAT1010 is a 10-ton hydraulic tube and pipe bender powered by 230V single-phase electricity. It features a portable hydraulic power unit, 180° bending capacity, and supports pipe, tube, and square stock for industrial fabrication and metalworking applications.
-
The Edwards HAT1020 is a 10-ton hydraulic tube and pipe bender powered by 230V 3-phase electricity. It features a portable hydraulic power unit, up to 180° bending capability, and is designed for industrial fabrication, structural tubing, and production metalworking applications.
Reviews
There are no reviews yet.