Edwards HAT1010 10-Ton Hydraulic Bender – 1PH 230V

Description

Edwards HAT1010 10-Ton Hydraulic Bender – 1PH 230V

Product Overview

The Edwards HAT1010 is a 10-ton hydraulic tube and pipe bender system designed for fabrication shops that require high-force, repeatable bending up to 180° on structural tubing and pipe.

It runs on 230V single-phase power, making it more accessible than larger 3-phase industrial bending systems while still delivering serious shop-level performance. The unit is typically shipped as a complete plug-and-play system with a dedicated portable power unit, allowing immediate operation without needing integration into an ironworker.

This model is widely used in metal fabrication, HVAC manufacturing, automotive chassis work, and general industrial bending applications.

Key Features

• Powerful 10-ton hydraulic bending force
• 230V single-phase (1PH) electrical system
• Plug-and-play hydraulic power unit included
• Horizontal or vertical bending operation
• Capable of repeatable bends up to 180°
• Heavy-duty rolling frame for shop mobility
• Integrated degree control for accuracy
• Compatible with a wide range of die sets
• Designed for production and fabrication environments

Bending Capacity

• Pipe: up to 2″ Schedule 40 (ID)
• Tube: up to 2.5″ OD
• Square tube: up to 2″ OD
• Maximum bend angle: 180°
• Stroke: ~14 in hydraulic ram

Technical Highlights

• Force: 10 tons
• Power: 230V / 1-phase
• Hydraulic system: integrated power unit (portable pump included)
• Control system: jog/hand controls with E-stop
• Operation: horizontal or vertical configuration
• Frame: heavy-duty steel rolling base (~1000 lb class machine)

Applications

• Structural steel fabrication
• Pipe and tube bending shops
• HVAC and industrial piping systems
• Automotive chassis and exhaust fabrication
• Custom metal fabrication work
• Maintenance and repair workshops

Why this model is popular

The HAT1010 is often chosen because it:

• Works on standard single-phase shop power (230V)
• Delivers industrial-grade bending without full factory infrastructure
• Supports fast setup and repeat production bending
• Offers flexibility with multiple die options for different profiles

Edwards HAT1010 10-Ton Hydraulic Bender – 1PH 230V: Buying Considerations

The Edwards HAT1010 is a 10-ton hydraulic tube and pipe bender powered by 230V single-phase electricity. It features a portable hydraulic power unit, 180° bending capacity, and supports pipe, tube, and square stock for industrial fabrication and metalworking applications.

Before ordering the Edwards HAT1010 10-Ton Hydraulic Bender – 1PH 230V from Edwards Ironworkers, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Confirm bar diameter range and bend/cut capacity matches the rebar or bar stock sizes actually used on typical projects.
• Check production rate requirements against manual, electric, or hydraulic machine classes.
• Verify power supply and portability needs match whether the equipment stays in a shop or moves between job sites.
• Review tooling and die availability for the specific bend angles and bar grades used.

What determines whether a bar bender needs to be hydraulic versus electric?

Larger bar diameters and higher production volumes generally favor hydraulic bending for consistent force and speed, while electric models suit lighter-duty or occasional bending work with lower power requirements.

For sizing help across the full Bar Fabrication category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.

Total Cost of Ownership

The purchase price of the Edwards HAT1010 10-Ton Hydraulic Bender – 1PH 230V is only part of the real cost of owning this equipment. Factor in routine maintenance parts, consumables specific to the Bar Fabrication category, fuel or energy use over the equipment’s service life, and the cost of downtime if a failure happens during a critical job. Equipment with a lower purchase price but weaker local parts availability or a shorter warranty period can end up costing more over three to five years than a model with a higher upfront price and stronger support.

Warranty and Support

Confirm the specific warranty terms Edwards Ironworkers offers on this model, including coverage length, what is and is not covered (wear parts are frequently excluded), and whether the warranty is transferable if the equipment is resold. Check whether authorized service is available in your region before an issue comes up, rather than after – parts and qualified technician availability varies significantly by location and can be the deciding factor between two otherwise comparable machines.

Keep the original purchase documentation, serial number, and any commissioning or acceptance records together – this documentation is typically required to make a warranty claim and simplifies any future resale or insurance process.

Looking for the Edwards HAT1010 10-Ton Hydraulic Bender? This model is a popular choice among buyers who need dependable performance from the Edwards HAT1010 10-Ton Hydraulic Bender. Our team frequently recommends the Edwards HAT1010 10-Ton Hydraulic Bender for its balance of build quality, reliability, and value in daily industrial use.

Customers consistently rate the Edwards HAT1010 10-Ton Hydraulic Bender highly for its consistent output and ease of maintenance. If you’re comparing options, the Edwards HAT1010 10-Ton Hydraulic Bender stands out as a reliable, well-supported choice backed by manufacturer warranty.