DWZ148 
6961 Subtotal: $38,898.00
Chicago Pneumatic RCP-10123D Air Compressor – 10HP Duplex
$6,334.00
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
In Stock
Free Standard Shipping Worldwide
|
US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
Description
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
| Specification | Details |
|---|---|
| Model | Chicago Pneumatic RCP-10123D |
| Series | RCP Iron Series Duplex |
| Motor Power | 10 HP (2 × 5 HP) |
| Pump Type | Two-Stage Cast Iron Duplex |
| Lubrication | Splash Lubricated |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 120 Gallons |
| Tank Orientation | Horizontal |
| Voltage | 208–230V / 460V, 3-Phase (variant dependent) |
| Duty Cycle | Industrial / Continuous Use |
| Application | Workshop / Automotive / Light Industrial |
You may also like…
Champion BDPL5Y Air Compressor: Extreme-duty 9HP diesel-powered compressor featuring the PL-Series pressure-lubricated pump, designed for off-level operation in remote field environments.- Engine Specs: 9.1 HP Yanmar Diesel
- Pneumatic Supply: 614 L/min (21.7 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Storage Build: 30 Gallon Horizontal
- Industrial Spec: Pressure Lubrication System
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The Champion ADVA-S33 industrial reciprocating air compressor eliminates plant pneumatic supply shortfalls, driving a powerful 15 HP motor configuration to run extensive downstream manufacturing tool networks seamlessly.
- Delivers high capacity 50.1 air CFM.
- Large 120 gallon horizontal storage receiver.
- Maintains maximum 175 Psi working limits.
- Runs on industrial 460V three phase.
- Complete Advantage control package electrical systems.
-
The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
- Combined free air delivery of 51.6 CFM.
- High pressure performance reaching 175 Psi.
- Massive 120 gallon horizontal storage receiver.
- Complete Advantage duplex alternating electrical control panels.
- Runs on high efficiency 208V three phase.
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
Related products
-
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.
- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
Reviews
There are no reviews yet.