EMAX EGES1860ST – Industrial Plus Gas 2-Stage Air Compressor
$2,001.00
The EGES1860ST is built for serious mobile air demand, especially where multiple pneumatic tools must run simultaneously. Its high CFM output allows it to support:
- Framing nailers and roofing tools
- Impact wrenches and air ratchets
- Light sandblasting setups
- Industrial maintenance tools in the field
Key performance strengths:
- High airflow for multi-tool operation
- Stable pressure under continuous jobsite load
- Engine-driven independence (no electrical supply needed)
- Low RPM pump reduces wear and heat buildup
In Stock
Description
EMAX EGES1860ST – Industrial Plus Gas 2-Stage Air Compressor (18 HP, 60 Gallon)
The EMAX EGES1860ST is a heavy-duty gas-powered, two-stage industrial piston air compressor designed for contractors, mobile service trucks, and demanding jobsite applications where high airflow, portability, and reliability are critical.
It is part of the EMAX Industrial Plus Gas Drive Series, built around a low-RPM, cast iron, pressure-lubricated pump system paired with a Honda GX630 18 HP engine. This combination is engineered for long service life, cooler operation, and consistent high-output performance in harsh working environments.
The unit delivers approximately 34–39 CFM at 100 PSI (175 PSI max) depending on configuration, placing it in the high-capacity contractor class for mobile air systems.
Key Features
- 18 HP Honda GX630 gasoline engine (electric start on most configurations)
- Heavy-duty two-stage cast iron, pressure-lubricated pump
- Air delivery: ~34–39 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 60-gallon ASME-certified horizontal air tank
- Low RPM industrial design for extended pump life
- Belt-driven system with improved tension control
- Built-in head unloaders for smoother startup under load
- Cool-Tek system for lower operating temperature and reduced moisture
- Designed for truck mount and jobsite operation
Industrial Plus Advantages
High Output Contractor-Class Performance
Up to ~39 CFM makes it one of the stronger portable gas units in its category.
Heavy-Duty Cast Iron Pump
Built for long-term durability under harsh operating conditions.
Cool-Tek Thermal Management
Reduces operating temperature and moisture buildup for better air quality.
Jobsite Mobility
Designed specifically for truck mounting and remote operation.
Ideal Applications
- Construction job sites
- Mobile service trucks
- Infrastructure maintenance
- Industrial field repair
- Sandblasting (light to medium duty)
- Multi-tool pneumatic systems
| Specification | Details |
|---|---|
| Model | EMAX EGES1860ST |
| Engine | Honda GX630 18 HP |
| Pump Type | Two-stage cast iron, pressure lubricated |
| Air Delivery | ~34–39 CFM @ 100 PSI |
| Max Pressure | 175 PSI |
| Tank Capacity | 60 Gallons |
| Tank Type | Horizontal ASME |
| Start System | Electric start |
| Duty Cycle | Contractor / Industrial |
| Application | Construction / Mobile service / Field work |
You may also like…
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation. -
Champion BER10 Air Compressor: Premium 10HP Evolution Series compressor combining reciprocating power with rotary-screw silence, featuring a sound-attenuating enclosure for point-of-use installation.
- Drive Strength: 10.0 HP Evolution Quiet
- Flow Performance: 965 L/min (34.1 CFM)
- Operational Force: 175 PSI (12 Bar)
- Vessel Size: 120 Gallon Horizontal
- Acoustic Logic: 66 dBA Noise Level
-
The DXCM201 is designed around a high-pressure 200 PSI system, which gives it a key advantage: it can store more usable air in the tank compared to lower-pressure 20-gallon compressors. This translates into longer tool runtime before the compressor needs to refill.
However, its real working strength is the 6.2 SCFM at 90 PSI, which places it in the light-to-medium duty class:
- Good for impact wrenches (intermittent use)
- Suitable for air ratchets and nail guns
- Works for tire inflation and shop maintenance
- Not ideal for continuous high-demand tools like grinders or sandblasting
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
-
The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
- Combined free air delivery of 51.6 CFM.
- High pressure performance reaching 175 Psi.
- Massive 120 gallon horizontal storage receiver.
- Complete Advantage duplex alternating electrical control panels.
- Runs on high efficiency 208V three phase.
-
The HER10-12 is designed for facilities that need industrial-grade compressed air without the noise impact of traditional piston compressors. Its enclosed design allows it to be installed near production areas, reducing piping distance and pressure loss while improving system efficiency.
The RP30D two-stage pump provides stable airflow and long service life, while the enclosure uses engineered airflow channels and cooling fans to manage heat buildup during continuous operation.
This makes it ideal for:
- Automotive workshops with multiple bays
- Manufacturing and assembly facilities
- CNC machining support systems
- Production environments requiring low noise
Related products
-
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.
- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
-
BelAire 6G3HV Air Compressor: Compact 3HP vertical unit designed to maximize shop floor space while providing reliable pneumatic power for small-scale automotive tasks.
- Motor Efficiency: 3HP High-Efficiency
- Pneumatic Supply: 320 L/min (11.3 CFM)
- Force Rating: 135 PSI (9.3 Bar)
- Tank Orientation: 60 Gallon Vertical
- Build Design: Solid Cast Iron
-
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
Reviews
There are no reviews yet.