Dewalt DXCMV7518075 – Air Compressor
$1,222.00
The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems.
Its performance strengths include:
- Stable airflow for multiple pneumatic tools at once
- High-pressure storage (175 PSI) for longer tool runtime
- Lower cycling frequency due to large 80-gallon tank
- Improved efficiency from two-stage compression
In Stock
Description
DEWALT DXCMV7518075 Air Compressor – 7.5 HP 80 Gallon Two-Stage Stationary Electric
The DEWALT DXCMV7518075 is a heavy-duty industrial 80-gallon vertical stationary air compressor designed for professional automotive shops, fabrication facilities, and light industrial environments that need high airflow, continuous-duty performance, and stable 175 PSI pressure output.
It features a 7.5 HP industrial induction motor (low RPM, high durability), a two-stage cast iron oil-lubricated pump, and a large 80-gallon ASME-certified vertical tank, making it one of DEWALT’s stronger shop-class compressors for multi-tool operation.
This model delivers approximately 22.1 CFM at 100 PSI and 21.2 CFM at 175 PSI, which puts it firmly in the high-output 7.5 HP industrial category suitable for demanding workshop use.
Key Features
- 7.5 HP heavy-duty industrial electric motor (1725 RPM, low-speed design)
- Rugged two-stage cast iron compressor pump
- Air delivery: ~22.1 CFM @ 100 PSI
- Sustained output: ~21.2 CFM @ 175 PSI
- Maximum pressure: 175 PSI
- 80-gallon ASME-certified vertical steel air tank
- Belt-drive system for reduced RPM and longer pump life
- Heavy-duty intercooler and finned flywheel for better heat control
- Magnetic motor starter (factory installed on most configurations)
- Designed for continuous workshop duty cycles
Performance Overview
The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems.
Its performance strengths include:
- Stable airflow for multiple pneumatic tools at once
- High-pressure storage (175 PSI) for longer tool runtime
- Lower cycling frequency due to large 80-gallon tank
- Improved efficiency from two-stage compression
Typical use cases:
- Automotive repair shops
- Tire service centers
- Light fabrication and welding shops
- Maintenance workshops
- Paint and finishing systems (moderate duty)
It is not intended for continuous heavy industrial loads like large production lines or constant sandblasting operations.
Advantages
Two-Stage Cast Iron Pump
Improves compression efficiency, reduces heat, and extends service life.
High Output (22 CFM Class)
Strong enough for multiple users and tools simultaneously.
Large 80-Gallon Tank
Reduces pressure drops and compressor cycling.
Industrial Low-RPM Motor
Built for long operational life under daily shop use.
Ideal Applications
- Automotive workshops
- Light industrial production
- Metal fabrication shops
- Maintenance departments
- Pneumatic tool systems
- Painting and finishing work
| Specification | Details |
|---|---|
| Model | DEWALT DXCMV7518075 |
| Motor Power | 7.5 HP |
| Pump Type | Two-stage cast iron, oil-lubricated |
| Air Delivery | 22.1 CFM @ 100 PSI |
| Max Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Voltage | 208–230V (single-phase) |
| Duty Cycle | Continuous workshop / light industrial |
| Application | Automotive / fabrication / maintenance |
You may also like…
-
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.
- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
The HPL30-24 is designed for facilities where compressed air is a critical utility supporting production, automation, and manufacturing processes. Its 101 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Automated manufacturing lines
- Industrial blast and finishing systems
- Large fabrication workshops
- Packaging and processing facilities
- Facility-wide compressed air networks
- Multi-shift production environments
The large 240-gallon receiver tank helps stabilize system pressure during peak demand, reducing compressor cycling and improving overall efficiency. Meanwhile, the pressure-lubricated PL-70 pump continuously delivers filtered oil to critical internal components, significantly extending service life under continuous operation.
-
Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments.
- Engine Specs: 11.0 HP Honda GX340
- Discharge Rate: 524 L/min (18.5 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 30 Gallon Horizontal
- Technical Logic: Fully Enclosed Belt Guard
-
The HDPL5-3Y is built for serious field duty, where compressors must operate reliably under vibration, dust, heat, and uneven terrain. Its pressure lubrication system continuously feeds oil to critical internal components, significantly improving durability compared to standard splash-lubricated compressors.
The 30-gallon tank keeps the system compact for truck mounting, while still providing enough reserve air for impact tools, grinders, and intermittent blasting work.
This makes it a strong choice for contractors who need true off-grid compressed air power with industrial-grade reliability.
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
Related products
-
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.
- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications.
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.
- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
Reviews
There are no reviews yet.