Champion BER10 Air Compressor – 10HP Evolution
$4,899.00
Champion BER10 Air Compressor: Premium 10HP Evolution Series compressor combining reciprocating power with rotary-screw silence, featuring a sound-attenuating enclosure for point-of-use installation.
- Drive Strength: 10.0 HP Evolution Quiet
- Flow Performance: 965 L/min (34.1 CFM)
- Operational Force: 175 PSI (12 Bar)
- Vessel Size: 120 Gallon Horizontal
- Acoustic Logic: 66 dBA Noise Level
In Stock
Description
Champion BER10 Air Compressor – 10 HP Evolution Series Quiet Enclosed Industrial Compressor
The Champion BER10 Air Compressor is part of the Champion Evolution Series, a premium line of sound-attenuated, enclosed two-stage reciprocating compressors designed for industrial environments that require high airflow with significantly reduced noise levels. It is built around a 10 HP three-phase electric motor, a high-efficiency two-stage splash-lubricated cast iron pump (RP30D series), and a fully enclosed acoustic cabinet system for low-noise operation.
This model is engineered for workshops, automotive facilities, and light manufacturing plants where the compressor can be installed directly in the work area instead of a separate compressor room, thanks to its ultra-quiet design.
It delivers approximately 34 CFM at 175 PSI, making it suitable for continuous shop air demand and multi-tool usage in professional environments.
Key Features
- 10 HP industrial three-phase electric motor
- Heavy-duty two-stage cast iron reciprocating pump (Evolution RP30D platform)
- Fully enclosed sound-attenuated cabinet design for low noise operation
- Noise level as low as ~66 dBA (quiet enough for in-shop installation)
- Air delivery: ~34 CFM at 175 PSI
- Maximum pressure: 175 PSI
- Splash-lubricated pump for reduced maintenance complexity
- Magnetic starter and industrial control system included
- Integrated cooling airflow system for motor and pump separation
- Vibration isolation mounting for reduced mechanical noise
- Designed for 80/20 duty cycle industrial operation
Industrial Performance Overview
The BER10 is designed for facilities that need industrial-grade compressed air without the noise footprint of traditional piston compressors. Unlike open-frame compressors, the Evolution Series enclosure significantly reduces vibration and sound, allowing installation closer to production areas.
Its two-stage cast iron pump provides stable airflow at higher pressures, making it suitable for:
- Continuous shop air systems
- Multi-bay automotive workshops
- Light manufacturing and assembly lines
- CNC support air systems
The enclosure system also improves airflow management, keeping motor and pump temperatures stable even under extended duty cycles.
Ideal Applications
- Automotive repair and service centers
- Manufacturing and production facilities
- CNC machining and fabrication shops
- Woodworking and finishing operations
- Industrial maintenance departments
- Noise-sensitive workshop environments
| Specification | Details |
|---|---|
| Model Champion | BER10 |
| Series | Evolution Series |
| Motor Power | 10 HP |
| Compressor Type | Two-Stage Cast Iron (RP30D platform) |
| Enclosure | Sound-attenuated cabinet |
| Air Delivery | ~34 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI |
| Noise Level | ~66 dBA |
| Voltage | 208–230V / 460V (3-phase) |
| Duty Cycle | ~80% |
| Application | Industrial / Automotive / Workshop |
You may also like…
-
The EGES24120T is designed for high-demand jobsite air systems, capable of running multiple pneumatic tools simultaneously. Its major advantage is the combination of:
- Very high airflow (near 60 CFM class)
- Large 120-gallon storage buffer
- Gas engine independence (no electrical supply required)
This makes it suitable for operations where multiple technicians are using air tools at once.
Typical applications include:
- Heavy construction and framing crews
- Roadwork and infrastructure maintenance
- Industrial field service trucks
- Sandblasting (light to medium duty setups)
- Large multi-tool pneumatic systems
-
The ESP10D120V3 is designed for high-demand industrial environments where multiple pneumatic tools operate simultaneously. Compared to single-phase Silent Air models, the 3-phase configuration provides:
- Smoother power delivery and higher efficiency
- Better performance under continuous load
- Reduced electrical stress and heat buildup
- Improved suitability for long runtime industrial systems
Typical applications include:
- Fabrication workshops
- Automotive service centers with multiple bays
- Manufacturing support systems
- Paint and finishing lines
- Multi-tool pneumatic stations
-
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.
- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
Related products
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
-
The BelAire 3G3HKL is engineered for technicians who need reliable compressed air in the field. Its gas-powered engine eliminates dependence on electricity, while the two-stage pump ensures stable pressure and efficient air delivery even under heavy load.
The 30-gallon tank provides a balance between portability and usable air reserve, making it ideal for service vehicles and mobile repair units.
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase.
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.
- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
Reviews
There are no reviews yet.