-
×
EGES1860ST
1 × $7,999.00
Subtotal: $7,999.00
Dewalt DXCMTA1980854.SAN – Air Compressor
$631.00
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.
- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
In Stock
Free Standard Shipping Worldwide
|
US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
Description
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.
- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
| Model | DXCMTA1980854.SAN |
|---|---|
| Brand | DEWALT |
| Ship Weight | 160.0 lbs |
| Horsepower | 1.9 HP |
| Air Tank Size | 8 Gal |
| Volts | 120/240 |
| CFM at | 90 PSI 5.7 |
| Max. PSI | 155 |
| CFM at | 40 PSI 7 |
| Air Outlets (qty.) | 1 |
| Air Outlet Size | 3/8 |
| Amps | 15 |
| Duty Cycle | 100 % |
| Pump Material | Cast iron |
| Oil Required | Yes (comes in pump) |
| Drain Type | Manual |
| Tank Orientation | Twin wheelbarrow |
| Product Weight | 160 lb |
| Dimensions | L x W x H (in.) 45 5/8 x 20 x 29 |
You may also like…
-
The Champion HR15DF-24 is designed for facilities where compressed air is a critical production utility. Its duplex design provides operational flexibility by allowing one compressor to operate during lower demand periods while automatically bringing the second compressor online during peak usage. This approach helps balance wear, improve efficiency, and increase system reliability.The dual R-30 pumps are engineered for dependable long-term service with:
- Low-speed operation at approximately 1,034 RPM
- Reduced heat generation
- Lower vibration levels
- Extended component lifespan
- Consistent airflow under heavy loads
-
The Champion HPL20-12 heavy duty horizontal piston compressor resolves continuous-duty cycle constraints, forcing a massive 65 CFM pneumatic stream smoothly through factory automation grids to sustain high production velocities.- Massive free air delivery of 65 CFM.
- Powerful 20 HP high torque motor.
- Large 1-1/2 inch NPT outlet connections.
- Rigid heavy 575 kg stabilization footprint.
- Runs on efficient 230V three phase.
-
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
-
The ESP10A080V1 is designed for high-output workshop environments where noise control matters. Compared to standard 10 HP compressors, its key advantage is not only airflow but also:
- Much lower intake noise (the loudest part of piston compressors)
- Stable high-volume airflow (~38 CFM class)
- Reduced vibration due to low-RPM pump design
- Better suitability for indoor or attached-shop installations
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
-
The ES10V080V1 is designed for high-output shop environments where noise reduction is important. Compared to standard 10 HP piston compressors, it offers:
- Much lower perceived noise (intake silencing system)
- Stable airflow for multiple pneumatic tools
- Reduced vibration due to low-RPM pump operation
- Strong 38 CFM output suitable for demanding shop tasks
Typical applications include:
- Automotive repair shops
- Tire and service centers
- Fabrication and welding shops
- Maintenance facilities
- Multi-tool pneumatic workstations
Related products
-
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
The BelAire 3G3HKL is engineered for technicians who need reliable compressed air in the field. Its gas-powered engine eliminates dependence on electricity, while the two-stage pump ensures stable pressure and efficient air delivery even under heavy load.
The 30-gallon tank provides a balance between portability and usable air reserve, making it ideal for service vehicles and mobile repair units.
-
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
Reviews
There are no reviews yet.