Dewalt DXCMV5048055.1 – Air Compressor
$788.00
The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to:
- Run multiple pneumatic tools at the same time
- Maintain stable pressure under intermittent heavy load
- Reduce compressor cycling due to large tank reserve
- Improve efficiency compared to single-stage compressors
In Stock
Description
DEWALT DXCMV5048055.1 Air Compressor – 80 Gallon 5 HP Two-Stage Stationary Industrial Compressor
The DEWALT DXCMV5048055.1 is a heavy-duty 80-gallon vertical stationary electric air compressor designed for professional automotive shops, maintenance facilities, and light industrial environments that require high airflow, durability, and continuous-duty performance.
This model features a 5 HP industrial induction motor, a two-stage cast iron, oil-lubricated reciprocating pump, and a large 80-gallon ASME-certified vertical steel air receiver tank, making it one of DEWALT’s most capable workshop compressors for multi-tool operation.
It delivers approximately 17.9 CFM at 100 PSI and 17.0 CFM at 175 PSI, which places it in the high-output 5 HP industrial class suitable for demanding shop applications.
Key Features
- 5 HP heavy-duty industrial electric motor (230V)
- Rugged two-stage cast iron compressor pump
- Air delivery: ~17.9 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 80-gallon ASME-certified vertical air receiver tank
- Patented piston design for improved efficiency and cooling
- Deep fin cooling system and balanced flywheel for lower operating temperature
- Integrated control panel with gauges and regulator
- Thermal overload protection for motor safety
- Designed for continuous workshop duty
Performance Overview
The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to:
- Run multiple pneumatic tools at the same time
- Maintain stable pressure under intermittent heavy load
- Reduce compressor cycling due to large tank reserve
- Improve efficiency compared to single-stage compressors
Typical use cases include:
- Automotive repair shops
- Tire service centers
- Light fabrication and welding shops
- Maintenance workshops
- Painting and finishing work
It is not intended for continuous heavy-duty industrial systems like large production lines or sandblasting rigs running nonstop.
Advantages
Two-Stage Cast Iron Pump
Improves efficiency, reduces heat, and increases compressor lifespan.
High Airflow Output (~17.9 CFM)
Supports multiple simultaneous workshop tools.
Large 80-Gallon Tank
Stabilizes pressure and reduces cycling frequency.
Industrial Build Quality
Designed for long-term professional use in demanding environments.
Ideal Applications
- Automotive workshops
- Light industrial facilities
- Fabrication shops
- Maintenance departments
- Paint and body shops
- General pneumatic tool systems
| Specification | Details |
|---|---|
| Model | DEWALT DXCMV5048055.1 |
| Type | Stationary Electric Air Compressor |
| Motor Power | 5 HP |
| Pump Type | Two-stage cast iron, oil-lubricated |
| Air Delivery | ~17.9 CFM @ 100 PSI |
| Max Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Voltage | 230V single-phase |
| Duty Cycle | Continuous workshop / light industrial |
| Application | Automotive / fabrication / maintenance |
You may also like…
-
The Champion HPL7DF-12 is designed for businesses that require dependable compressed air throughout the workday without sacrificing reliability. The duplex configuration offers operational flexibility by alternating compressor operation during normal usage, reducing wear and extending equipment life. During periods of high demand, both compressors can operate simultaneously to maximize airflow output.
The pressure-lubricated PL-Series pumps continuously circulate oil to critical components such as crankshafts, bearings, and connecting rods, providing superior protection compared to traditional splash-lubricated systems.
With approximately 50–52 CFM output, the HPL7DF-12 can support:
- Multiple pneumatic tools simultaneously
- Automotive repair and tire service operations
- CNC machinery support systems
- Fabrication and welding workshops
- Industrial maintenance departments
- Light manufacturing production lines
-
The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
- Combined free air delivery of 51.6 CFM.
- High pressure performance reaching 175 Psi.
- Massive 120 gallon horizontal storage receiver.
- Complete Advantage duplex alternating electrical control panels.
- Runs on high efficiency 208V three phase.
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
-
The Champion HPL5D-8 is engineered for businesses that require reliable compressed air without moving to larger industrial compressor systems. The duplex design provides significant operational advantages, including reduced wear through alternating compressor cycles and increased airflow capacity during peak demand periods.
The pressure-lubricated PL-Series pumps continuously circulate filtered oil to bearings, crankshafts, and other critical components, significantly extending pump life and improving reliability in continuous-use environments.
With approximately 34 CFM at 175 PSI, the HPL5D-8 can efficiently support:
- Multiple pneumatic tools simultaneously
- Automotive repair bays
- Tire service equipment
- Maintenance workshops
- Light manufacturing operations
- Small production lines
-
The HDPL5-3Y is built for serious field duty, where compressors must operate reliably under vibration, dust, heat, and uneven terrain. Its pressure lubrication system continuously feeds oil to critical internal components, significantly improving durability compared to standard splash-lubricated compressors.
The 30-gallon tank keeps the system compact for truck mounting, while still providing enough reserve air for impact tools, grinders, and intermittent blasting work.
This makes it a strong choice for contractors who need true off-grid compressed air power with industrial-grade reliability.
-
EMAX ESP10D240V3: The flagship of the dual-pump series, this 3-phase 240-gallon unit offers the highest storage capacity and performance for heavy-duty industrial automation.
- Motor Specs: 10.0 HP 3-Phase
- Flow Capacity: 962 L/min (34 CFM @ 100 PSI)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Size: 240 Gallon Horizontal
- Elite Module: Premium Silent Air Baffle System
Related products
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.
- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
The BelAire 3G3HKL is engineered for technicians who need reliable compressed air in the field. Its gas-powered engine eliminates dependence on electricity, while the two-stage pump ensures stable pressure and efficient air delivery even under heavy load.
The 30-gallon tank provides a balance between portability and usable air reserve, making it ideal for service vehicles and mobile repair units.
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.
- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.
- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance.
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
Reviews
There are no reviews yet.