Dewalt DXCMV5048055.1 – Air Compressor

Description

DEWALT DXCMV5048055.1 Air Compressor – 80 Gallon 5 HP Two-Stage Stationary Industrial Compressor

The DEWALT DXCMV5048055.1 is a heavy-duty 80-gallon vertical stationary electric air compressor designed for professional automotive shops, maintenance facilities, and light industrial environments that require high airflow, durability, and continuous-duty performance.

This model features a 5 HP industrial induction motor, a two-stage cast iron, oil-lubricated reciprocating pump, and a large 80-gallon ASME-certified vertical steel air receiver tank, making it one of DEWALT’s most capable workshop compressors for multi-tool operation.

It delivers approximately 17.9 CFM at 100 PSI and 17.0 CFM at 175 PSI, which places it in the high-output 5 HP industrial class suitable for demanding shop applications.

Key Features

• 5 HP heavy-duty industrial electric motor (230V)
• Rugged two-stage cast iron compressor pump
• Air delivery: ~17.9 CFM @ 100 PSI
• Maximum pressure: 175 PSI
• 80-gallon ASME-certified vertical air receiver tank
• Patented piston design for improved efficiency and cooling
• Deep fin cooling system and balanced flywheel for lower operating temperature
• Integrated control panel with gauges and regulator
• Thermal overload protection for motor safety
• Designed for continuous workshop duty

Performance Overview

The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to:

• Run multiple pneumatic tools at the same time
• Maintain stable pressure under intermittent heavy load
• Reduce compressor cycling due to large tank reserve
• Improve efficiency compared to single-stage compressors

Typical use cases include:

• Automotive repair shops
• Tire service centers
• Light fabrication and welding shops
• Maintenance workshops
• Painting and finishing work

It is not intended for continuous heavy-duty industrial systems like large production lines or sandblasting rigs running nonstop.

Advantages

Two-Stage Cast Iron Pump

Improves efficiency, reduces heat, and increases compressor lifespan.

High Airflow Output (~17.9 CFM)

Supports multiple simultaneous workshop tools.

Large 80-Gallon Tank

Stabilizes pressure and reduces cycling frequency.

Industrial Build Quality

Designed for long-term professional use in demanding environments.

Ideal Applications

• Automotive workshops
• Light industrial facilities
• Fabrication shops
• Maintenance departments
• Paint and body shops
• General pneumatic tool systems

Dewalt DXCMV5048055.1 – Air Compressor: Buying Considerations

The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to:

Run multiple pneumatic tools at the same time
Maintain stable pressure under intermittent heavy load
Reduce compressor cycling due to large tank reserve
Improve efficiency compared to single-stage compressors

Before ordering the Dewalt DXCMV5048055.1 – Air Compressor from Dewalt, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.

Looking for the Dewalt DXCMV5048055.1? This model is a popular choice among buyers who need dependable performance from the Dewalt DXCMV5048055.1. Our team frequently recommends the Dewalt DXCMV5048055.1 for its balance of build quality, reliability, and value in daily industrial use.