Champion HPL15F-12 Air Compressor – 15HP PL-Series
$4,990.00
The HPL15F-12 is designed for high-demand compressed air systems where uptime and reliability are critical. Its PL-Series pressure lubrication system ensures continuous oil flow to bearings and internal components, significantly improving durability compared to standard splash-lubricated compressors.
With a large 120-gallon tank and high CFM output, it is capable of supporting:
- Multiple production lines simultaneously
- CNC machining and automated systems
- High-cycle pneumatic tool environments
- Continuous shop air distribution systems
The system is optimized for reduced downtime, lower heat buildup, and stable long-term operation in industrial environments.
In Stock
Description
Champion HPL15F-12 Air Compressor – 15 HP PL-Series Pressure Lubricated Industrial Compressor (120 Gallon)
The Champion HPL15F-12 Air Compressor is a heavy-duty industrial PL-Series duplex-style pressure-lubricated reciprocating compressor system designed for manufacturing plants, automotive facilities, fabrication shops, and continuous-duty compressed air networks. It features a 15 HP three-phase electric motor, Champion’s PL-30A pressure-lubricated two-stage cast iron pump system, and a 120-gallon ASME-certified horizontal tank, delivering high airflow and long service life in demanding industrial environments.
This model is engineered for continuous operation, high reliability, and extended maintenance intervals, making it suitable for facilities that require stable compressed air across multiple workstations.
It delivers approximately 48–55 CFM at 175 PSI, depending on configuration and RPM settings, placing it in the high-output industrial reciprocating class.
Key Features
- 15 HP industrial three-phase electric motor
- Heavy-duty PL-Series pressure-lubricated two-stage cast iron pump (PL-30A platform)
- High airflow output: ~48–55 CFM @ 175 PSI
- Maximum pressure: 175 PSI (PL-Series capable up to higher ratings depending on setup)
- 120-gallon ASME-certified horizontal air receiver tank
- Positive displacement oil pump for continuous lubrication of critical components
- Hydraulic unloader for loadless starting and reduced motor stress
- Disc valve system for improved efficiency and airflow stability
- External spin-on oil filtration system (configuration dependent)
- Built for continuous-duty industrial operation (24/7 capable environments)
- Heavy-duty base-mounted configuration for plant integration
Ideal Applications
- Manufacturing plants
- Automotive production and service centers
- CNC machining and fabrication shops
- Industrial maintenance facilities
- Packaging and assembly lines
- Multi-user compressed air systems
- Continuous-duty production environments
| Specification | Details |
|---|---|
| Model | Champion HPL15F-12 |
| Series | PL-Series (Pressure Lubricated) |
| Motor Power | 15 HP |
| Pump Type | PL-30A Two-Stage Cast Iron |
| Air Delivery | ~48–55 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 120 Gallons |
| Tank Orientation | Horizontal |
| Voltage | 208/230V or 460V (3-phase) |
| Application | Industrial / Manufacturing / Continuous Duty Systems |
You may also like…
-
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
- Stable airflow without pressure spikes
- Lower noise compared to reciprocating compressors
- Reduced vibration and mechanical wear
- Better efficiency in constant-demand environments
It is especially useful where air demand never fully stops, such as:
- Small manufacturing lines
- CNC machines (light duty)
- Packaging equipment
- Continuous workshop air systems
- Multi-tool pneumatic stations
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.
- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
-
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
- Longer tool runtime before the compressor restarts
- Faster recovery for small air tools
- Better efficiency for intermittent use
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
- Nail guns and staplers
- Tire inflation and blow guns
- Small impact tools (intermittent use)
- Light painting or airbrushing (limited duty)
It is not intended for continuous tools like grinders or sandblasting equipment.
-
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
- Reduce pressure drops during tool use
- Support multiple intermittent air tools
- Improve recovery time compared to smaller compressors
- Maintain stable pressure during workshop demand peaks
Related products
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications.
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
-
BelAire 6G3HV Air Compressor: Compact 3HP vertical unit designed to maximize shop floor space while providing reliable pneumatic power for small-scale automotive tasks.
- Motor Efficiency: 3HP High-Efficiency
- Pneumatic Supply: 320 L/min (11.3 CFM)
- Force Rating: 135 PSI (9.3 Bar)
- Tank Orientation: 60 Gallon Vertical
- Build Design: Solid Cast Iron
-
Despite being a powerful shop compressor, the 418VL is known for relatively quiet operation compared to lighter-duty high-RPM compressors. The low-speed pump design reduces noise, vibration, and heat buildup, which helps extend service life and improves efficiency during long operating cycles.
Its 80-gallon tank also helps stabilize air pressure, reducing frequent motor cycling during heavy tool use.
Reviews
There are no reviews yet.