EMAX ERI0050801 – Industrial Rotary Screw Compressor
$2,566.00
The ERI0050801 is designed for constant air demand environments, where piston compressors would normally cycle on and off. Instead, the rotary screw system:
- Produces steady, non-pulsating airflow
- Eliminates frequent start/stop cycling
- Reduces mechanical wear and heat stress
- Improves efficiency in long runtime applications
This makes it ideal for:
- Small manufacturing facilities
- Continuous workshop air systems
- Packaging and assembly lines
- CNC light-duty operations
- Multi-tool pneumatic stations
In Stock
Description
EMAX ERI0050801 – Industrial Rotary Screw Air Compressor (5 HP, 80 Gallon Tank Mount)
The EMAX ERI0050801 is a compact industrial rotary screw air compressor system mounted on an 80-gallon ASME-certified tank, designed for continuous-duty operation, quiet performance, and high-efficiency compressed air delivery in workshops and light industrial environments.
Unlike piston compressors, this model uses an oil-injected rotary screw air-end, which allows it to run continuously (100% duty cycle) with smoother airflow, lower vibration, and reduced maintenance requirements. It is ideal for facilities that need steady air supply without pressure cycling interruptions.
This unit is powered by a 5 HP single-phase electric motor and delivers approximately 19.4 CFM at 100 PSI with a maximum pressure of 145 PSI.
Key Features
- 5 HP industrial electric motor (230V, single-phase)
- Oil-injected rotary screw air-end system
- Mounted on 80-gallon ASME-certified horizontal tank
- Air delivery: ~19.4 CFM @ 100 PSI
- 100% continuous duty cycle capability
- Sound-insulated design for low noise operation
- Belt-drive system with 1750 RPM motor operation
- Integrated smart controller (Logik 9 system)
- Maintenance alerts, pressure scheduling, and system monitoring
- High-efficiency filtration and oil separation system
Advantages
100% Duty Cycle Operation
Can run continuously without resting cycles.
Rotary Screw Efficiency
Smooth airflow with minimal pressure fluctuation.
Low Noise Cabinet Design
Significantly quieter than piston compressors.
Tank-Mounted Stability
80-gallon buffer reduces pressure dips during demand spikes.
Ideal Applications
- Industrial workshops
- Production facilities
- CNC/light automation systems
- Packaging lines
- Fabrication shops
- Continuous pneumatic tool systems
| Specification | Details |
|---|---|
| Model | EMAX ERI0050801 |
| Type | Rotary Screw Air Compressor (Tank Mounted) |
| Motor Power | 5 HP |
| Air Delivery | ~19.4 CFM @ 100 PSI |
| Max Pressure | 145 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Horizontal |
| Drive Type | Belt-driven |
| Voltage | 230V single-phase |
| Duty Cycle | 100% continuous |
| Cooling | Air/oil radiator system |
| Application | Industrial / Workshop / Production |
You may also like…
-
The Champion HPL20-24 is designed for facilities where compressed air is a critical production utility. The large 240-gallon receiver tank helps stabilize system pressure during peak demand periods, while the PL-70A pressure-lubricated pump ensures superior reliability under continuous operation.
Unlike conventional splash-lubricated compressors, the PL-Series lubrication system continuously delivers filtered oil to bearings, connecting rods, and other critical components. This significantly reduces wear, improves cooling, and extends service life in high-duty-cycle environments.
The compressor is capable of supporting:
- Multiple CNC machining centers
- Automated production lines
- Large fabrication shops
- Industrial painting systems
- Multi-user pneumatic tool networks
- Central plant compressed air systems
-
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
- Longer tool runtime before the compressor restarts
- Faster recovery for small air tools
- Better efficiency for intermittent use
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
- Nail guns and staplers
- Tire inflation and blow guns
- Small impact tools (intermittent use)
- Light painting or airbrushing (limited duty)
It is not intended for continuous tools like grinders or sandblasting equipment.
-
The EI07V080V1 is built for serious shop air demand, offering significantly higher airflow than typical 7.5 HP compressors. Its strength comes from:
- High airflow (~31 CFM) suitable for multiple pneumatic tools
- Two-stage compression for improved efficiency and cooler operation
- Pressure-lubricated pump system for longer lifespan
- Large 80-gallon tank to stabilize pressure during peak demand
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication and welding shops
- Maintenance facilities
- Multi-tool workshop environments
It is not intended for continuous heavy-duty industrial processes like large-scale sandblasting or production-line compressed air systems.
-
The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes:
- Lower operating temperature
- Reduced internal wear
- Improved air dryness (less condensation buildup)
- Longer service intervals
This makes it especially suitable for shops where the compressor runs frequently throughout the day.
-
EMAX ESP10D240V3: The flagship of the dual-pump series, this 3-phase 240-gallon unit offers the highest storage capacity and performance for heavy-duty industrial automation.
- Motor Specs: 10.0 HP 3-Phase
- Flow Capacity: 962 L/min (34 CFM @ 100 PSI)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Size: 240 Gallon Horizontal
- Elite Module: Premium Silent Air Baffle System
-
The Champion HR25-13 platform is designed for facilities requiring stable, high-volume compressed air for multiple simultaneous users. The R-70 pump operates at low RPM, which improves long-term durability by reducing:
- Heat buildup
- Mechanical wear
- Vibration stress
- Maintenance frequency
Related products
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
Reviews
There are no reviews yet.