EMAX ESP10A080V1 – Vertical Solo Mount Silent Air Compressor
$3,990.00
The ESP10A080V1 is designed for high-output workshop environments where noise control matters. Compared to standard 10 HP compressors, its key advantage is not only airflow but also:
- Much lower intake noise (the loudest part of piston compressors)
- Stable high-volume airflow (~38 CFM class)
- Reduced vibration due to low-RPM pump design
- Better suitability for indoor or attached-shop installations
In Stock
Description
EMAX ESP10A080V1 – Silent Air 10 HP Vertical 2-Stage Compressor (80 Gallon)
The EMAX ESP10A080V1 (often closely related to the ESP10V080V1 platform) is a heavy-duty Silent Air / Whisper Series industrial piston compressor designed for workshops that need very high airflow, reduced noise, and continuous-duty capability in a single-phase system.
It uses EMAX’s patented Silent Air intake silencing system, which reduces compressor intake noise by channeling air through multi-stage baffle filtration, making it significantly quieter than conventional 10 HP piston compressors.
This unit is built around a 10 HP industrial electric motor, a two-stage cast iron pressure-lubricated pump, and an 80-gallon ASME vertical tank, delivering approximately 38 CFM at 100 PSI with a maximum pressure of 175 PSI.
Key Features
- 10 HP industrial single-phase electric motor (230V)
- Silent Air / Whisper intake noise reduction system (up to ~35–50% quieter vs standard piston compressors)
- Heavy-duty two-stage cast iron, pressure-lubricated pump
- Air delivery: ~38 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 80-gallon ASME-certified vertical steel tank
- Low-RPM pump design (~730–800 RPM range depending on variant)
- Belt-driven industrial system with magnetic starter
- Automatic or continuous run capability (depending on setup)
- Heavy-duty cooling and lubrication system for long service life
Advantages
Silent Air Intake System
Reduces noise by routing intake air through multi-baffle filtration chambers.
High Airflow Output (38 CFM Class)
Strong enough for multi-user workshop environments.
Industrial Cast Iron Pump
Built for durability and long service life under daily operation.
80-Gallon Stability
Reduces pressure drop and compressor cycling frequency.
Ideal Applications
- Automotive workshops
- Tire service centers
- Fabrication shops
- Maintenance facilities
- Paint and body shops
- Industrial garages needing quieter operation
| Specification | Details |
|---|---|
| Model | EMAX ESP10A080V1 (Silent Air platform) |
| Motor Power | 10 HP |
| Phase | Single Phase (230V) |
| Pump Type | Two-stage cast iron, pressure lubricated |
| Air Delivery | ~38 CFM @ 100 PSI |
| Max Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Pump RPM | ~730–800 RPM |
| Duty Cycle | Industrial / Continuous workshop use |
| Noise System | Silent Air intake silencing technology |
You may also like…
-
The EI07V080V1 is built for serious shop air demand, offering significantly higher airflow than typical 7.5 HP compressors. Its strength comes from:
- High airflow (~31 CFM) suitable for multiple pneumatic tools
- Two-stage compression for improved efficiency and cooler operation
- Pressure-lubricated pump system for longer lifespan
- Large 80-gallon tank to stabilize pressure during peak demand
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication and welding shops
- Maintenance facilities
- Multi-tool workshop environments
It is not intended for continuous heavy-duty industrial processes like large-scale sandblasting or production-line compressed air systems.
-
The HPL25-12 is designed specifically for extreme-duty industrial applications where compressed air is a mission-critical utility. Unlike conventional splash-lubricated compressors, the PL-Series utilizes a full pressure lubrication system that continuously supplies filtered oil to crankshaft bearings, connecting rods, and critical internal components. This design significantly reduces wear and extends equipment life under continuous operation.
The compressor's 90.1 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Large fabrication facilities
- Automated production lines
- Industrial blast and finishing systems
- Packaging and processing plants
- Centralized compressed air networks
Its low pump speed of approximately 770 RPM helps minimize heat generation, vibration, and component wear, contributing to long-term reliability.
-
The HPL30-24 is designed for facilities where compressed air is a critical utility supporting production, automation, and manufacturing processes. Its 101 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Automated manufacturing lines
- Industrial blast and finishing systems
- Large fabrication workshops
- Packaging and processing facilities
- Facility-wide compressed air networks
- Multi-shift production environments
The large 240-gallon receiver tank helps stabilize system pressure during peak demand, reducing compressor cycling and improving overall efficiency. Meanwhile, the pressure-lubricated PL-70 pump continuously delivers filtered oil to critical internal components, significantly extending service life under continuous operation.
-
BelAire 438VE Air Compressor: Elite-Series 8HP vertical compressor upgraded with a low-oil safety switch and aftercooler for superior moisture control and durability.
- Elite Drive: 8HP Protected Motor
- Volume Delivery: 716 L/min (25.3 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Vessel Size: 60 Gallon Vertical
- Safety Module: Aftercooler & Low-Oil
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
Related products
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
BelAire 438VE Air Compressor: Elite-Series 8HP vertical compressor upgraded with a low-oil safety switch and aftercooler for superior moisture control and durability.
- Elite Drive: 8HP Protected Motor
- Volume Delivery: 716 L/min (25.3 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Vessel Size: 60 Gallon Vertical
- Safety Module: Aftercooler & Low-Oil
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
Reviews
There are no reviews yet.