No products in the cart.
Pressure Washer
The 1000MX is not designed for heavy industrial stripping or paint removal. Instead, it focuses on controlled, safe cleaning power with steady flow.
At 1000 PSI and ~2 GPM, the machine prioritizes:
- Consistent rinse power rather than aggressive cutting force
- Safe operation on delicate surfaces
- Stable long-duration use without overheating
- Chemical-assisted cleaning (soap + rinse workflow)
In practical terms, it performs best when:
- You let chemicals do most of the cleaning work
- You use it as a rinse and maintenance washer rather than a “stripper”
- You need a dependable electric unit for daily or frequent use
-
The 1000WM/SS is designed for controlled cleaning rather than high-impact stripping. At 1000 PSI with 2.2 GPM flow, it emphasizes:
- Strong rinsing capability rather than cutting power
- Safe cleaning for equipment, vehicles, and facility surfaces
- Consistent performance during long daily use cycles
- Reduced fatigue compared to handheld portable washers
Because it is wall-mounted, it also improves workflow efficiency by keeping hoses, wand, and controls permanently accessible in one fixed cleaning station.
-
The 1000XDE is designed for controlled cleaning applications, not heavy surface stripping. At 1000 PSI with 2.2 GPM, it focuses on:
- Strong rinsing and washing efficiency
- Safe cleaning of equipment, vehicles, and facility surfaces
- Continuous daily use in maintenance environments
- Effective chemical-assisted cleaning workflows
In practice, this class of machine works best when:
- Detergent does most of the cleaning work
- The washer is used primarily for rinsing and surface preparation
- Operators need consistent performance over long sessions
-
The 1500MX sits in the “sweet spot” between light commercial and industrial cleaning systems:
- Much stronger cleaning force than 1000 PSI units
- High flow (3.0 GPM) improves rinsing speed and detergent coverage
- Better suited for grease, oil, and workshop dirt removal
- Still safe for indoor or enclosed environments due to electric motor
Compared to lower-pressure Cam Spray models, this unit significantly reduces cleaning time by combining moderate pressure + high water volume, which is often more effective than PSI alone.
-
The 2000QE is not just a pressure washer—it’s a thermal cleaning system. The combination of 2000 PSI pressure + 4.0 GPM flow + hot water up to 195°F makes it highly effective for:
- Breaking down grease and oil without excessive pressure
- Reducing chemical usage due to heat-assisted cleaning
- Faster cleaning cycles in industrial environments
Hot water dramatically improves cleaning performance because heat lowers grease viscosity, allowing contaminants to lift more easily compared to cold water systems.
-
The 2725MX sits in the high-performance electric pressure washer class, where:
- 2700 PSI provides strong cutting and surface cleaning power
- 2.5 GPM gives enough flow to rinse dirt and carry debris away efficiently
- The combination makes it far more effective than low-flow electric washers for industrial cleaning tasks
In real-world use, this model performs well for:
- Degreasing workshop floors
- Cleaning machinery and industrial equipment
- Automotive bays and detailing areas
- Driveways, pads, and light concrete cleaning
- Fleet and service vehicle washing (light-duty commercial level)
It is still an electric system, so it prioritizes control, consistency, and indoor-safe operation over raw gas-powered output.
-
Cam Spray 3000WM/SSM3 – Electric Cold Water Wall-Mount PW – 3000 PSI, 4.0 GPM, 230V 3PH
$1,778.00In StockThe 3000WM/SSM3 is designed for continuous, high-demand cleaning operations where both pressure and flow matter equally:
- 3000 PSI provides strong surface cutting and degreasing power
- 4.0 GPM flow ensures fast rinsing and improved dirt removal
- Wall-mount design improves workflow efficiency and saves floor space
- Industrial triplex pump supports rebuildable long-term service
This combination makes it significantly more effective than smaller electric washers for:
- Heavy equipment cleaning
- Workshop floor degreasing
- Automotive bay maintenance
- Industrial machinery washdown
- Fleet and service vehicle cleaning
-
The Cam Spray 4000QE is designed for demanding cleaning environments where cold water systems struggle to remove grease and heavy contamination.
The combination of:
- 4000 PSI pressure
- 4.0 GPM flow
- Hot water up to 200°F
provides significantly faster cleaning compared to standard cold-water pressure washers.
Hot water penetrates grease and oil deposits more effectively, reducing the need for harsh chemicals while shortening cleaning time. This makes the 4000QE ideal for industrial facilities where productivity and cleanliness are critical.
-
The Cam Spray C1000E is designed for applications where controlled cleaning pressure is preferred over aggressive surface stripping.
With 1000 PSI and 2.0 GPM, it provides:
- Consistent cleaning performance
- Effective rinsing capability
- Reduced risk of surface damage
- Lower water consumption
- Safe operation on delicate equipment and surfaces
This pressure range is ideal for routine maintenance cleaning, washing vehicles, equipment rinsing, and facility upkeep.
-
The Generac 7223 Guardian 14kW is an air-cooled automatic standby generator designed for dependable home backup power. Running on natural gas or propane, it delivers clean electricity, remote monitoring, and fully automatic operation for residential emergency power protection.
-
The Generac 8873 XC Series is designed for users who need maximum cleaning performance without sacrificing reliability.
With 4200 PSI and 4.0 GPM, the unit delivers approximately 16,800 cleaning units (CU), making it suitable for demanding commercial and industrial cleaning tasks.
Cleaning Power Benefits
- Rapid removal of mud, grease, and grime
- Effective concrete and pavement cleaning
- Surface preparation before painting or coating
- Heavy equipment washdown
- Fleet vehicle cleaning
- Construction site cleanup
The combination of high pressure and substantial water flow enables faster cleaning while reducing labor time.
-
Mosmatic DR – Adjustable Roof Pressure Washer Surface Cleaner – 21in, 4000 PSI, 30.0 GPM
$543.00In StockThe Mosmatic DR Series is designed to provide uniform cleaning across large surfaces without leaving streaks, zebra striping, or missed areas.
Unlike traditional pressure washing wands that concentrate cleaning in a narrow stream, the rotating arm distributes water evenly across a 21-inch path, dramatically increasing productivity.
Key Performance Benefits
- Faster cleaning speeds
- Consistent cleaning results
- Reduced operator fatigue
- Lower risk of surface damage
- Uniform pressure distribution
- Enhanced safety when cleaning elevated surfaces
The adjustable head allows operators to optimize the spray angle based on roof pitch, wall orientation, or cleaning application.
-
Mosmatic FL-CR-750 – Commercial Pressure Washer Surface Cleaner – 30in, 4000 PSI, 12.0 GPM
$345.00In StockThe FL-CR-750 is specifically engineered for cleaning large surface areas quickly and consistently. The 30-inch cleaning deck significantly reduces cleaning time compared to smaller 16–24 inch surface cleaners, making it ideal for contractors handling high-volume commercial projects. Its three-nozzle rotary system provides uniform cleaning coverage while minimizing streaking. The precision-balanced rotor and professional swivel ensure smooth operation even during extended cleaning sessions. -
The HURp Hurricane Pro is specifically designed for applications where conventional surface cleaners cannot reach. Its adjustable cleaning deck allows operators to position the spray head at various angles, making it ideal for:
- Vehicle undercarriage cleaning
- Fleet truck maintenance
- Trailer cleaning
- Construction equipment washdown
- Agricultural machinery cleaning
- Boat hull and trailer maintenance
- Heavy equipment cleaning
The extended chassis design provides over 8 feet of cleaning reach, while the large pneumatic casters ensure smooth movement across uneven surfaces.
-
The STM-12 is fundamentally different from traditional surface cleaners rated at 3000–4000 PSI. Instead of relying on impact force, it uses high-temperature steam to:
- Dissolve grease and oils
- Kill bacteria and microorganisms
- Reduce chemical usage
- Accelerate drying times
- Recover wastewater during cleaning
Mosmatic states that the Steaminator can clean, disinfect, and degrease surfaces 4–5 times faster than using a steam wand alone, while leaving surfaces nearly dry due to the recovery system.
-
The NorthStar 157115 is engineered for cleaning tasks where cold-water pressure washers are often ineffective. By combining pressure, flow, and heat, the unit quickly breaks down grease, oil, and stubborn deposits.
Cleaning Performance
- 3000 PSI provides strong impact force for dirt removal.
- 4.0 GPM ensures effective rinsing and debris removal.
- Wet steam mode enhances degreasing and sanitizing performance.
- Hot water significantly reduces cleaning time compared to cold-water systems.
The wet steam function is particularly effective for:
- Heavy grease removal
- Oil-contaminated equipment
- Food processing sanitation
- Industrial maintenance cleaning
