Chicago Pneumatic RCP-C7583VS Air Compressor – 7.5HP 80Gal
$1,566.00
Chicago Pneumatic RCP-C7583VS: Industrial 7.5HP vertical system featuring an “Iron Series” pump and 3-phase motor for high-cycle automotive shop environments.
- Motor Specs: 7.5 HP 3-Phase
- Airflow Volume: 680 L/min (24.0 CFM)
- Pressure Peak: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- System Extra: Magnetic Starter Pre-Wired
In Stock
Description
Chicago Pneumatic RCP-C7583VS Air Compressor – 7.5 HP Iron Series Two-Stage (80 Gallon Vertical)
The Chicago Pneumatic RCP-C7583VS Air Compressor is a heavy-duty 7.5 HP three-phase two-stage reciprocating compressor from the Iron Series, engineered for automotive workshops, fabrication shops, and light industrial applications that require reliable compressed air, long service life, and consistent performance.
It features a 7.5 HP electric motor, a rugged all cast iron two-stage pump, and an 80-gallon ASME-certified vertical air receiver tank, making it a compact but powerful industrial-grade air system designed for daily professional use.
This model delivers approximately 23 CFM at 100 PSI (up to ~175 PSI maximum pressure), placing it in the standard industrial 7.5 HP shop compressor class used for multi-tool operation and continuous workshop duty.
Key Features
- 7.5 HP industrial three-phase electric motor
- Heavy-duty two-stage cast iron compressor pump
- Air delivery: ~23 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 80-gallon ASME-certified vertical air receiver tank
- Low-RPM pump design (~900 RPM) for longer durability
- Disc valve technology for improved airflow efficiency
- Finned discharge tubes for better cooling performance
- Magnetic motor starter included (typical configuration)
- Built for continuous-duty industrial and workshop use
Performance Overview
The RCP-C7583VS is designed for consistent shop air supply in environments where multiple pneumatic tools operate throughout the day. The two-stage cast iron pump compresses air more efficiently than single-stage systems, reducing heat and improving long-term reliability.
Key performance benefits include:
- Stable airflow for multiple air tools
- Lower operating RPM for reduced wear and heat
- Improved cooling via intercooler and finned discharge system
- Reliable continuous-duty operation
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small industrial production environments
Iron Series Advantages
Heavy-Duty Cast Iron Construction
Built for long service life under frequent cycling and continuous use.
Two-Stage Compression Efficiency
Improves air output stability and reduces thermal stress.
Industrial Three-Phase Power
Designed for commercial workshop and production environments.
Vertical Tank Efficiency
80-gallon vertical ASME tank saves floor space while maintaining strong air reserve.
Ideal Applications
- Automotive workshops
- Light industrial production
- Fabrication shops
- Maintenance departments
- Pneumatic tool systems
- Multi-user workshop environments
| Specification | Details |
|---|---|
| Model | Chicago Pneumatic RCP-C7583VS |
| Series | Iron Series |
| Motor Power | 7.5 HP |
| Pump Type | Two-Stage Cast Iron |
| Lubrication | Splash Lubricated |
| Air Delivery | ~23 CFM @ 100 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Voltage | 208–230V / 460V (3-phase) |
| Duty Cycle | Continuous Industrial Use |
| Application | Automotive / Light Industrial |
You may also like…
-
The Champion HR20-12 is engineered for facilities that require dependable compressed air throughout multiple shifts. Its R-70 compressor pump is specifically designed for larger industrial systems and delivers high airflow while maintaining low operating speeds. This combination helps provide:
- Lower operating temperatures
- Reduced vibration levels
- Extended bearing and piston life
- Improved reliability
- Reduced maintenance requirements
- Consistent airflow under heavy workloads
The 120-gallon receiver tank helps stabilize system pressure during peak demand periods and reduces compressor cycling, improving overall efficiency and equipment longevity.
-
The EGES24120T is designed for high-demand jobsite air systems, capable of running multiple pneumatic tools simultaneously. Its major advantage is the combination of:
- Very high airflow (near 60 CFM class)
- Large 120-gallon storage buffer
- Gas engine independence (no electrical supply required)
This makes it suitable for operations where multiple technicians are using air tools at once.
Typical applications include:
- Heavy construction and framing crews
- Roadwork and infrastructure maintenance
- Industrial field service trucks
- Sandblasting (light to medium duty setups)
- Large multi-tool pneumatic systems
-
The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems.
Its performance strengths include:
- Stable airflow for multiple pneumatic tools at once
- High-pressure storage (175 PSI) for longer tool runtime
- Lower cycling frequency due to large 80-gallon tank
- Improved efficiency from two-stage compression
-
Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments.
- Engine Specs: 11.0 HP Honda GX340
- Discharge Rate: 524 L/min (18.5 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 30 Gallon Horizontal
- Technical Logic: Fully Enclosed Belt Guard
-
The Champion HR15-12 is built for facilities that require reliable compressed air throughout multiple shifts. Its R-40 pump offers greater displacement than standard R-30 models while operating at lower RPM, resulting in:
- Lower operating temperatures
- Reduced vibration and noise
- Extended bearing and component life
- Improved energy efficiency
- Longer maintenance intervals
The large 120-gallon tank helps stabilize air pressure during peak demand and reduces compressor cycling, improving overall system efficiency.
-
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
- Stable airflow without pressure spikes
- Lower noise compared to reciprocating compressors
- Reduced vibration and mechanical wear
- Better efficiency in constant-demand environments
It is especially useful where air demand never fully stops, such as:
- Small manufacturing lines
- CNC machines (light duty)
- Packaging equipment
- Continuous workshop air systems
- Multi-tool pneumatic stations
Related products
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.
- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
Despite being a powerful shop compressor, the 418VL is known for relatively quiet operation compared to lighter-duty high-RPM compressors. The low-speed pump design reduces noise, vibration, and heat buildup, which helps extend service life and improves efficiency during long operating cycles.
Its 80-gallon tank also helps stabilize air pressure, reducing frequent motor cycling during heavy tool use.
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
-
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.
- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
Reviews
There are no reviews yet.