Champion ADVA-D38 Air Compressor – 5HP Advantage
$5,000.00
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
In Stock
Description
Champion ADVA-D38 Air Compressor – 5 HP Two-Stage Industrial Air Compressor (Advantage Series)
The Champion ADVA-D38 Air Compressor is part of the Champion Advantage Series, a premium line of factory-packaged two-stage industrial piston compressors designed for automotive workshops, manufacturing, and heavy-duty commercial use. This model features a 5 HP electric motor, a rugged R-Series cast iron two-stage pump, and a tank-mounted configuration, engineered for long service life, high efficiency, and reliable continuous-duty performance.
Built for professional environments, the ADVA-D38 typically delivers around 17 CFM at 175 PSI, making it suitable for powering multiple air tools in automotive and light industrial applications.
Key Features
- 5 HP industrial electric motor (typically 230V single-phase or 3-phase variants available)
- Heavy-duty two-stage R-Series cast iron pump
- Factory-packaged Advantage Series system (ready to install)
- Maximum pressure: up to 175 PSI
- High airflow output: ~16.5–17+ CFM @ 175 PSI
- Low RPM pump design for durability and cooler operation
- Disc valve technology for improved efficiency and reduced blow-by
- Integrated safety features (model-dependent):
- Magnetic starter
- Low oil shutdown
- Auto tank drain
- Aftercooler option
- Built for continuous industrial and workshop duty cycles
- ASME-certified tank system (depending on configuration)
Industrial Performance Overview
The ADVA-D38 is designed as a fully packaged industrial air system, meaning it arrives with pre-installed components that reduce setup time and installation complexity. The Advantage Series is known for combining high reliability with long maintenance intervals, making it popular in professional service environments where downtime is expensive.
Its R-Series two-stage pump uses heavy-duty internal components (disc valves, intercooling, and balanced rotating assemblies) to maintain stable airflow under continuous load. This makes it well-suited for multi-tool shop environments and moderate production use.
Ideal Applications
- Automotive repair shops
- Tire service and maintenance centers
- Light manufacturing facilities
- Metal fabrication workshops
- General industrial maintenance
- Small production and assembly lines
| Specification | Details |
|---|---|
| Model Champion | ADVA-D38 |
| Series | Advantage Series |
| Motor Power | 5 HP |
| Compressor | Type Two-Stage Cast Iron (R-Series Pump) |
| Tank Capacity | Typically 80–120 Gallons (configuration dependent) |
| Air Delivery | ~17 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI |
| Voltage | 230V / 1PH or 3PH (variant dependent) |
| Drive Type | Belt Drive |
| Application | Industrial / Automotive / Workshop |
You may also like…
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation. -
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
-
Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments.
- Engine Specs: 11.0 HP Honda GX340
- Discharge Rate: 524 L/min (18.5 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 30 Gallon Horizontal
- Technical Logic: Fully Enclosed Belt Guard
-
The DXCMLA4708065 is designed for steady, continuous shop air supply rather than peak portable performance. Its strength lies in its large tank capacity combined with a low-RPM cast iron pump, which allows it to:
- Maintain stable pressure during tool use
- Reduce compressor cycling frequency
- Support multiple intermittent air tools at once
Typical use cases include:
- Automotive repair shops
- Tire service centers
- Maintenance departments
- Light fabrication and metalworking
- Painting and spray applications (moderate duty)
It is not intended for heavy continuous tools like large sandblasting systems or industrial grinders running nonstop.
-
The Champion HR20D-25 is designed for facilities where compressed air is a critical utility powering multiple production systems simultaneously. Its duplex configuration provides operational flexibility:
- One compressor can handle base load demand
- Both compressors operate during peak usage
- Built-in redundancy ensures uninterrupted production
The R-70 pump design operates at low RPM, reducing internal heat buildup and extending bearing and piston life. The large 250-gallon receiver tank helps stabilize pressure fluctuations, reducing cycling frequency and improving overall efficiency.
-
The Champion HR15-12 is built for facilities that require reliable compressed air throughout multiple shifts. Its R-40 pump offers greater displacement than standard R-30 models while operating at lower RPM, resulting in:
- Lower operating temperatures
- Reduced vibration and noise
- Extended bearing and component life
- Improved energy efficiency
- Longer maintenance intervals
The large 120-gallon tank helps stabilize air pressure during peak demand and reduces compressor cycling, improving overall system efficiency.
Related products
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.
- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
-
The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
- Combined free air delivery of 51.6 CFM.
- High pressure performance reaching 175 Psi.
- Massive 120 gallon horizontal storage receiver.
- Complete Advantage duplex alternating electrical control panels.
- Runs on high efficiency 208V three phase.
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase.
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications.
Reviews
There are no reviews yet.