Dewalt DXCMV7518075 – Air Compressor

Description

DEWALT DXCMV7518075 Air Compressor – 7.5 HP 80 Gallon Two-Stage Stationary Electric

The DEWALT DXCMV7518075 is a heavy-duty industrial 80-gallon vertical stationary air compressor designed for professional automotive shops, fabrication facilities, and light industrial environments that need high airflow, continuous-duty performance, and stable 175 PSI pressure output.

It features a 7.5 HP industrial induction motor (low RPM, high durability), a two-stage cast iron oil-lubricated pump, and a large 80-gallon ASME-certified vertical tank, making it one of DEWALT’s stronger shop-class compressors for multi-tool operation.

This model delivers approximately 22.1 CFM at 100 PSI and 21.2 CFM at 175 PSI, which puts it firmly in the high-output 7.5 HP industrial category suitable for demanding workshop use.

Key Features

• 7.5 HP heavy-duty industrial electric motor (1725 RPM, low-speed design)
• Rugged two-stage cast iron compressor pump
• Air delivery: ~22.1 CFM @ 100 PSI
• Sustained output: ~21.2 CFM @ 175 PSI
• Maximum pressure: 175 PSI
• 80-gallon ASME-certified vertical steel air tank
• Belt-drive system for reduced RPM and longer pump life
• Heavy-duty intercooler and finned flywheel for better heat control
• Magnetic motor starter (factory installed on most configurations)
• Designed for continuous workshop duty cycles

Performance Overview

The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems.

Its performance strengths include:

• Stable airflow for multiple pneumatic tools at once
• High-pressure storage (175 PSI) for longer tool runtime
• Lower cycling frequency due to large 80-gallon tank
• Improved efficiency from two-stage compression

Typical use cases:

• Automotive repair shops
• Tire service centers
• Light fabrication and welding shops
• Maintenance workshops
• Paint and finishing systems (moderate duty)

It is not intended for continuous heavy industrial loads like large production lines or constant sandblasting operations.

Advantages

Two-Stage Cast Iron Pump

Improves compression efficiency, reduces heat, and extends service life.

High Output (22 CFM Class)

Strong enough for multiple users and tools simultaneously.

Large 80-Gallon Tank

Reduces pressure drops and compressor cycling.

Industrial Low-RPM Motor

Built for long operational life under daily shop use.

Ideal Applications

• Automotive workshops
• Light industrial production
• Metal fabrication shops
• Maintenance departments
• Pneumatic tool systems
• Painting and finishing work

Dewalt DXCMV7518075 – Air Compressor: Buying Considerations

The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems.
Its performance strengths include:

Stable airflow for multiple pneumatic tools at once
High-pressure storage (175 PSI) for longer tool runtime
Lower cycling frequency due to large 80-gallon tank
Improved efficiency from two-stage compression

Before ordering the Dewalt DXCMV7518075 – Air Compressor from Dewalt, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.

Looking for the Dewalt DXCMV7518075? This model is a popular choice among buyers who need dependable performance from the Dewalt DXCMV7518075. Our team frequently recommends the Dewalt DXCMV7518075 for its balance of build quality, reliability, and value in daily industrial use.