Champion HPL30-24 Air Compressor – 30HP PL-Series
$8,400.00
The HPL30-24 is designed for facilities where compressed air is a critical utility supporting production, automation, and manufacturing processes. Its 101 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Automated manufacturing lines
- Industrial blast and finishing systems
- Large fabrication workshops
- Packaging and processing facilities
- Facility-wide compressed air networks
- Multi-shift production environments
The large 240-gallon receiver tank helps stabilize system pressure during peak demand, reducing compressor cycling and improving overall efficiency. Meanwhile, the pressure-lubricated PL-70 pump continuously delivers filtered oil to critical internal components, significantly extending service life under continuous operation.
In Stock
Description
Champion HPL30-24 Air Compressor – 30 HP PL-Series Pressure Lubricated Industrial Compressor (240 Gallon)
The Champion HPL30-24 Air Compressor is one of the most powerful models in Champion’s PL-Series pressure-lubricated reciprocating compressor lineup, engineered for large-scale manufacturing facilities, automotive production plants, heavy fabrication operations, and centralized compressed air systems. Equipped with a 30 HP three-phase electric motor, a heavy-duty PL-70 two-stage pressure-lubricated cast iron pump, and a 240-gallon ASME-certified horizontal air receiver tank, this compressor is designed for maximum airflow, exceptional durability, and continuous-duty industrial performance.
Delivering approximately 101 CFM at 175 PSI, the HPL30-24 is built for facilities that demand reliable compressed air around the clock. Its pressure-lubricated design ensures superior component protection, lower wear rates, and extended service life compared to conventional splash-lubricated compressors.
Key Features
- 30 HP industrial-grade three-phase electric motor
- Heavy-duty PL-70 two-stage pressure-lubricated cast iron pump
- Large 240-gallon ASME-certified horizontal air tank
- Air delivery: 101 CFM @ 175 PSI
- Maximum operating pressure: 175 PSI (up to 250 PSI rated capability)
- Positive displacement oil pump for continuous lubrication
- Hydraulic unloader system for loadless starting
- Built-in lubricant filtration system
- Disc valve technology for improved efficiency and airflow
- Air-cooled aftercooler for reduced moisture carryover
- Automatic tank drain system
- Vibration isolators for quieter operation
- Low oil shutdown protection
- Designed for 24/7 continuous-duty industrial service
Advantages of the PL-Series Design
Pressure Lubrication Technology
Unlike splash-lubricated compressors, the PL-Series uses a positive-displacement oil pump that continuously circulates filtered oil throughout the compressor. This reduces wear, improves cooling, and supports long-duration operation.
High Airflow Capacity
With over 100 CFM output, the HPL30-24 is capable of supporting large industrial air systems and multiple simultaneous users.
Heavy-Duty Industrial Construction
The PL-Series incorporates cast iron cylinders, disc valves, domed pistons, and industrial-grade bearings designed for maximum durability.
Reduced Maintenance and Downtime
Features such as oil filtration, low-oil protection, hydraulic unloading, and aftercooling contribute to lower maintenance requirements and improved operational reliability.
Ideal Applications
- Manufacturing plants
- Automotive assembly facilities
- Aerospace production
- CNC machining centers
- Heavy fabrication workshops
- Industrial maintenance operations
- Food and packaging plants
- Central compressed air systems
- Continuous production facilities
| Specification | Details |
|---|---|
| Model | Champion HPL30-24 |
| Series | PL-Series |
| Motor Power | 30 HP |
| Pump Model | PL-70 |
| Compressor Type | Two-Stage Pressure Lubricated |
| Tank Capacity | 240 Gallons |
| Tank Orientation | Horizontal |
| Air Delivery | 101 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI (250 PSI capability) |
| Pump Speed | Approximately 890 RPM |
| Voltage | 208/230V, 460V, or 575V Three-Phase |
| Lubrication System | Full Pressure Lubrication |
| Duty Cycle | Continuous Duty |
| Cooling | Air-Cooled Aftercooler |
| Application | Heavy Industrial Manufacturing |
You may also like…
-
The Champion HR20D-25 is designed for facilities where compressed air is a critical utility powering multiple production systems simultaneously. Its duplex configuration provides operational flexibility:
- One compressor can handle base load demand
- Both compressors operate during peak usage
- Built-in redundancy ensures uninterrupted production
The R-70 pump design operates at low RPM, reducing internal heat buildup and extending bearing and piston life. The large 250-gallon receiver tank helps stabilize pressure fluctuations, reducing cycling frequency and improving overall efficiency.
-
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.
- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
-
The Champion VPL15F-12 is designed for operations that require reliable compressed air in tight installation spaces without sacrificing performance. The vertical tank design reduces floor footprint while still providing strong air storage capacity to stabilize pressure during peak demand.
The PL-Series pressure-lubricated system continuously supplies oil to critical internal components such as bearings and crankshaft assemblies, improving durability and reducing wear compared to splash-lubricated designs.
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.
- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.
- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
Related products
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
Reviews
There are no reviews yet.