Chicago Pneumatic RCP-10123D Air Compressor – 10HP Duplex
$3,566.00
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
In Stock
Description
Chicago Pneumatic RCP-10123D Air Compressor – 10 HP Duplex (R-Series / Iron Series)
The Chicago Pneumatic RCP-10123D Air Compressor is a heavy-duty 10 HP duplex reciprocating air compressor system designed for commercial and light industrial applications that require reliable compressed air with redundancy and consistent performance. It features two 5 HP electric motors, dual cast iron two-stage pump systems, and a 120-gallon ASME-certified horizontal air receiver tank, making it a proven solution for workshops, automotive service centers, and manufacturing support operations.
This model is part of Chicago Pneumatic’s RCP Duplex Iron Series, engineered for durability, efficiency, and balanced operation through an automatic alternator system that switches load between both compressor pumps.
It delivers approximately 37 CFM at 100 PSI (and around 33–37 CFM at 175 PSI depending on configuration), making it suitable for multiple pneumatic tools and moderate industrial workloads.
Key Features
- Duplex configuration with 2 × 5 HP industrial electric motors
- Total system power: 10 HP
- Two-stage cast iron reciprocating pump design
- Air delivery: ~37 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 120-gallon ASME-certified horizontal air receiver tank
- Automatic alternator control for balanced pump usage
- Magnetic motor starters (industrial control package)
- Heavy-duty belt drive system with full enclosure guard
- Built-in redundancy for improved uptime
- Continuous-duty industrial design for workshop environments
Iron Series Duplex Advantages
Built-In Redundancy
Two independent compressor pumps ensure continuous operation even during service or partial failure.
Cast Iron Durability
Heavy-duty construction improves lifespan and reliability in demanding environments.
Balanced Operation
The alternator system distributes runtime evenly between both motors.
Stable Air Supply
Large tank capacity reduces pressure drops during simultaneous tool usage.
Ideal Applications
- Automotive workshops
- Industrial maintenance departments
- Light manufacturing facilities
- Fabrication shops
- Tire service operations
- Multi-user pneumatic systems
| Specification | Details |
|---|---|
| Model | Chicago Pneumatic RCP-10123D |
| Series | RCP Iron Series Duplex |
| Motor Power | 10 HP (2 × 5 HP) |
| Pump Type | Two-Stage Cast Iron Duplex |
| Lubrication | Splash Lubricated |
| Air Delivery | ~37 CFM @ 100 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 120 Gallons |
| Tank Orientation | Horizontal |
| Voltage | 208–230V / 460V, 3-Phase (variant dependent) |
| Duty Cycle | Industrial / Continuous Use |
| Application | Workshop / Automotive / Light Industrial |
You may also like…
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
-
The Champion HPL5D-8 is engineered for businesses that require reliable compressed air without moving to larger industrial compressor systems. The duplex design provides significant operational advantages, including reduced wear through alternating compressor cycles and increased airflow capacity during peak demand periods.
The pressure-lubricated PL-Series pumps continuously circulate filtered oil to bearings, crankshafts, and other critical components, significantly extending pump life and improving reliability in continuous-use environments.
With approximately 34 CFM at 175 PSI, the HPL5D-8 can efficiently support:
- Multiple pneumatic tools simultaneously
- Automotive repair bays
- Tire service equipment
- Maintenance workshops
- Light manufacturing operations
- Small production lines
-
The ERIK150003 is designed for continuous industrial air demand, where piston compressors would fail due to cycling limits and heat buildup. The rotary screw system provides:
- Constant airflow without pressure dips
- No start/stop cycling (reduces wear significantly)
- High efficiency at long runtime
- Much quieter operation than reciprocating compressors
Its ~60 CFM output allows it to support:
- Multiple CNC machines
- Automated production equipment
- Packaging lines
- Multi-user workshop air systems
- Continuous pneumatic tooling
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
- Stable airflow without pressure spikes
- Lower noise compared to reciprocating compressors
- Reduced vibration and mechanical wear
- Better efficiency in constant-demand environments
It is especially useful where air demand never fully stops, such as:
- Small manufacturing lines
- CNC machines (light duty)
- Packaging equipment
- Continuous workshop air systems
- Multi-tool pneumatic stations
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance.
Related products
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
Reviews
There are no reviews yet.