Campbell Hausfeld CE7051 – 5 HP Two-Stage Air Compressor
$1,001.00
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.
- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
In Stock
Description
Campbell Hausfeld CE7051 Air Compressor – 5 HP Two-Stage Industrial Air Compressor (80 Gallon)
The Campbell Hausfeld CE7051 is a commercial-grade two-stage stationary air compressor designed for automotive shops, fabrication facilities, and industrial maintenance environments that require reliable and consistent compressed air. It features a 5 HP electric motor, a rugged cast iron two-stage pump, and an 80-gallon ASME-certified tank, making it suitable for continuous-duty professional applications.
This model delivers approximately 16.4–17.2 CFM at 90–175 PSI and reaches a maximum pressure of 175 PSI, providing enough airflow to run multiple air tools in a professional workshop setting.
Key Features
- 5 HP industrial electric motor (208–230V or 460V, three-phase)
- Heavy-duty two-stage cast iron pump
- Large 80-gallon ASME-certified tank
- Air delivery: ~16.4 CFM @ 175 PSI
- Maximum pressure: 175 PSI
- Belt-driven low-RPM design for durability
- Magnetic motor starter included
- Built for heavy commercial and industrial duty cycles
- Long-life pump rated for extended operational hours
Performance Overview
The CE7051 is built for serious shop use, not light-duty homeowner applications. Its two-stage pump design compresses air more efficiently, reducing heat buildup and improving long-term durability compared to single-stage units.
With roughly 16+ CFM output, it can comfortably support:
- Impact wrenches (intermittent use)
- Air ratchets
- Paint guns (mid-duty setups)
- Tire service tools
- Small blasting or fabrication tasks (with airflow management)
It is not designed for high-demand continuous tools like large sandblasters or industrial spray lines.
Ideal Applications
- Automotive repair shops
- Tire and wheel service centers
- Metal fabrication workshops
- Light manufacturing facilities
- CNC support air systems
- General industrial maintenance
| Specification | Details |
|---|---|
| Model | CE7051 |
| Brand | Campbell Hausfeld |
| Motor Power | 5 HP |
| Voltage | 208–230V / 460V |
| Phase | Three Phase |
| Pump Type | Two-Stage Cast Iron |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Air Delivery | ~16.4–17.2 CFM |
| Max Pressure | 175 PSI |
| Drive Type | Belt Drive |
| Application | Industrial / Automotive Shop |
You may also like…
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
-
The ERI0050801 is designed for constant air demand environments, where piston compressors would normally cycle on and off. Instead, the rotary screw system:
- Produces steady, non-pulsating airflow
- Eliminates frequent start/stop cycling
- Reduces mechanical wear and heat stress
- Improves efficiency in long runtime applications
This makes it ideal for:
- Small manufacturing facilities
- Continuous workshop air systems
- Packaging and assembly lines
- CNC light-duty operations
- Multi-tool pneumatic stations
-
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
-
The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes:
- Lower operating temperature
- Reduced internal wear
- Improved air dryness (less condensation buildup)
- Longer service intervals
This makes it especially suitable for shops where the compressor runs frequently throughout the day.
-
The DXCMLA4708065 is designed for steady, continuous shop air supply rather than peak portable performance. Its strength lies in its large tank capacity combined with a low-RPM cast iron pump, which allows it to:
- Maintain stable pressure during tool use
- Reduce compressor cycling frequency
- Support multiple intermittent air tools at once
Typical use cases include:
- Automotive repair shops
- Tire service centers
- Maintenance departments
- Light fabrication and metalworking
- Painting and spray applications (moderate duty)
It is not intended for heavy continuous tools like large sandblasting systems or industrial grinders running nonstop.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
Related products
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
- Combined free air delivery of 51.6 CFM.
- High pressure performance reaching 175 Psi.
- Massive 120 gallon horizontal storage receiver.
- Complete Advantage duplex alternating electrical control panels.
- Runs on high efficiency 208V three phase.
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
Reviews
There are no reviews yet.