Champion HPL7DF-12 Air Compressor – 7.5HP PL-Series
$6,400.00
The Champion HPL7DF-12 is designed for businesses that require dependable compressed air throughout the workday without sacrificing reliability. The duplex configuration offers operational flexibility by alternating compressor operation during normal usage, reducing wear and extending equipment life. During periods of high demand, both compressors can operate simultaneously to maximize airflow output.
The pressure-lubricated PL-Series pumps continuously circulate oil to critical components such as crankshafts, bearings, and connecting rods, providing superior protection compared to traditional splash-lubricated systems.
With approximately 50–52 CFM output, the HPL7DF-12 can support:
- Multiple pneumatic tools simultaneously
- Automotive repair and tire service operations
- CNC machinery support systems
- Fabrication and welding workshops
- Industrial maintenance departments
- Light manufacturing production lines
In Stock
Description
Champion HPL7DF-12 Air Compressor – 7.5 HP PL-Series Duplex Pressure Lubricated Industrial Compressor (120 Gallon)
The Champion HPL7DF-12 Air Compressor is a high-performance PL-Series duplex pressure-lubricated reciprocating compressor system designed for automotive service centers, manufacturing facilities, maintenance departments, and industrial workshops requiring dependable compressed air with built-in redundancy. This model features dual 7.5 HP industrial electric motors, two heavy-duty PL-Series two-stage cast iron pumps, and a 120-gallon ASME-certified horizontal air receiver tank.
Engineered for continuous-duty operation, the HPL7DF-12 utilizes Champion’s advanced pressure lubrication system, ensuring critical internal components receive a constant supply of filtered oil for maximum durability and extended service life. The duplex configuration allows compressors to alternate during normal operation or run simultaneously during peak air demand.
Delivering approximately 50–52 CFM at 175 PSI, this compressor provides reliable airflow for multiple workstations and demanding industrial applications.
Key Features
- Duplex configuration with 2 × 7.5 HP industrial electric motors
- Total system power: 15 HP
- Dual PL-Series pressure-lubricated two-stage cast iron pumps
- Air delivery: ~50–52 CFM @ 175 PSI
- Maximum operating pressure: 175 PSI
- 120-gallon ASME-certified horizontal air receiver tank
- Full pressure lubrication system for superior pump protection
- Hydraulic unloading system for loadless starting
- Disc valve technology for increased efficiency and airflow stability
- Automatic alternator control for balanced compressor operation
- Heavy-duty cast iron construction
- Continuous-duty industrial design
- Reduced maintenance requirements and extended service intervals
Advantages of the PL-Series Duplex Design
Built-In Redundancy
Dual compressors ensure continued operation if one unit requires maintenance or servicing.
Pressure Lubrication Technology
Continuous oil circulation reduces wear, lowers operating temperatures, and extends pump life.
Increased Air Availability
Both compressor pumps can operate together to meet peak compressed air demands.
Lower Operating Costs
Alternating operation helps distribute wear evenly across both compressor units, reducing maintenance expenses over time.
Ideal Applications
- Automotive repair facilities
- Fleet maintenance workshops
- Manufacturing plants
- CNC machining operations
- Metal fabrication shops
- Industrial maintenance departments
- Packaging facilities
- Multi-station pneumatic tool systems
| Specification | Details |
|---|---|
| Model | Champion HPL7DF-12 |
| Series | PL-Series Duplex |
| Motor Power | 7.5 HP × 2 (15 HP Total) |
| Pump Type | Dual Two-Stage Cast Iron |
| Lubrication | Full Pressure Lubricated |
| Air Delivery | ~50–52 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 120 Gallons |
| Tank Orientation | Horizontal |
| Voltage | 208/230V, 460V, or 575V Three-Phase |
| Drive Type | Belt Driven |
| Duty Cycle | Continuous Duty |
| Application | Industrial / Manufacturing / Automotive |
You may also like…
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
The ES10V080V1 is designed for high-output shop environments where noise reduction is important. Compared to standard 10 HP piston compressors, it offers:
- Much lower perceived noise (intake silencing system)
- Stable airflow for multiple pneumatic tools
- Reduced vibration due to low-RPM pump operation
- Strong 38 CFM output suitable for demanding shop tasks
Typical applications include:
- Automotive repair shops
- Tire and service centers
- Fabrication and welding shops
- Maintenance facilities
- Multi-tool pneumatic workstations
-
Champion BDPL5Y Air Compressor: Extreme-duty 9HP diesel-powered compressor featuring the PL-Series pressure-lubricated pump, designed for off-level operation in remote field environments.
- Engine Specs: 9.1 HP Yanmar Diesel
- Pneumatic Supply: 614 L/min (21.7 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Storage Build: 30 Gallon Horizontal
- Industrial Spec: Pressure Lubrication System
-
The Champion HR7D-12 is built for environments where consistent airflow and operational redundancy are important. The duplex configuration allows:
- Alternating operation to balance wear between pumps
- Simultaneous operation during peak air demand
- Improved uptime and reduced downtime risk
The R-30 pumps are designed for low-RPM operation, which helps reduce internal heat, vibration, and long-term wear—making the system highly reliable for daily industrial use.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
-
The HDPL5-3Y is built for serious field duty, where compressors must operate reliably under vibration, dust, heat, and uneven terrain. Its pressure lubrication system continuously feeds oil to critical internal components, significantly improving durability compared to standard splash-lubricated compressors.
The 30-gallon tank keeps the system compact for truck mounting, while still providing enough reserve air for impact tools, grinders, and intermittent blasting work.
This makes it a strong choice for contractors who need true off-grid compressed air power with industrial-grade reliability.
Related products
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.
- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
The BelAire 3G3HKL is engineered for technicians who need reliable compressed air in the field. Its gas-powered engine eliminates dependence on electricity, while the two-stage pump ensures stable pressure and efficient air delivery even under heavy load.
The 30-gallon tank provides a balance between portability and usable air reserve, making it ideal for service vehicles and mobile repair units.
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications.
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
Reviews
There are no reviews yet.