-
×
CUB-17ARGBYLA10
1 × $1,849.00 -
×
CUB-34CBA2CS710
1 × $3,009.00 -
×
3312D
1 × $4,879.00
Subtotal: $9,737.00
Chicago Pneumatic C583VS4 Air Compressor – 5HP Two Stage
$2,719.00
The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes:
- Lower operating temperature
- Reduced internal wear
- Improved air dryness (less condensation buildup)
- Longer service intervals
This makes it especially suitable for shops where the compressor runs frequently throughout the day.
In Stock
Free Standard Shipping Worldwide
|
US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
Description
The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes:
- Lower operating temperature
- Reduced internal wear
- Improved air dryness (less condensation buildup)
- Longer service intervals
This makes it especially suitable for shops where the compressor runs frequently throughout the day.
| Specification | Details |
|---|---|
| Model | Chicago Pneumatic C583VS4 |
| Series | Iron Series |
| Motor Power | 5 HP |
| Pump Type | Two-Stage Cast Iron Piston |
| Lubrication | Splash Lubricated |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Type | Vertical |
| Voltage | 208–230V / 460V (3-phase depending version) |
| Duty Cycle | Continuous Industrial Use |
| Application | Workshop / Automotive / Light Industrial |
You may also like…
-
The BelAire 3G3HKL is engineered for technicians who need reliable compressed air in the field. Its gas-powered engine eliminates dependence on electricity, while the two-stage pump ensures stable pressure and efficient air delivery even under heavy load.
The 30-gallon tank provides a balance between portability and usable air reserve, making it ideal for service vehicles and mobile repair units.
-
The Champion HR7D-12 is built for environments where consistent airflow and operational redundancy are important. The duplex configuration allows:
- Alternating operation to balance wear between pumps
- Simultaneous operation during peak air demand
- Improved uptime and reduced downtime risk
The R-30 pumps are designed for low-RPM operation, which helps reduce internal heat, vibration, and long-term wear—making the system highly reliable for daily industrial use.
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
The ESP05V080I1PK is designed for quiet, stable, and clean compressed air delivery in professional environments.
Typical applications:
- Automotive workshops
- Tire and detailing shops
- Small fabrication facilities
- Paint and finishing systems
- Light industrial maintenance
- Shops requiring quiet operation indoors
-
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
Related products
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures. -
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance.
Reviews
There are no reviews yet.