Dewalt DXCM271 – Air Compressor
Dewalt DXCM271 – Air Compressor - Image 2

Dewalt DXCM271 – Air Compressor

$399.00

The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:

  • Longer tool runtime before the compressor restarts
  • Faster recovery for small air tools
  • Better efficiency for intermittent use

However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:

  • Nail guns and staplers
  • Tire inflation and blow guns
  • Small impact tools (intermittent use)
  • Light painting or airbrushing (limited duty)

It is not intended for continuous tools like grinders or sandblasting equipment.

In Stock

Buy Now
Free Standard Shipping Worldwide | US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
SKU: DXCM271 Category: Brand:

Description

The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:

  • Longer tool runtime before the compressor restarts
  • Faster recovery for small air tools
  • Better efficiency for intermittent use

However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:

  • Nail guns and staplers
  • Tire inflation and blow guns
  • Small impact tools (intermittent use)
  • Light painting or airbrushing (limited duty)

It is not intended for continuous tools like grinders or sandblasting equipment.

SpecificationDetails
ModelDEWALT DXCM271
Tank Capacity27 Gallons
Max Pressure200 PSI
Pump TypeOil-free single-stage
Air Delivery5.1 SCFM @ 90 PSI
Voltage120V single-phase
Duty CycleLight to medium duty
ApplicationGarage / DIY / Light workshop

Reviews

There are no reviews yet.

Be the first to review “Dewalt DXCM271 – Air Compressor”

Your email address will not be published. Required fields are marked *

You may also like…

  • Champion ADVA-D40 Air Compressor – 7.5HP Advantage

    Champion ADVA-D40 Air Compressor – 7.5HP Advantage

    $14,199.00
    In Stock
    Add to cart
    The Champion ADVA-D40 duplex air compressor resolves critical toolroom pressure dropouts, combining dual 7.5 HP electric motors with an integrated air dryer to maintain bone dry pneumatic supply tracks continuously.
    • Combined free air delivery of 51.6 CFM.
    • High pressure performance reaching 175 Psi.
    • Massive 120 gallon horizontal storage receiver.
    • Complete Advantage duplex alternating electrical control panels.
    • Runs on high efficiency 208V three phase.
  • Champion HR15-12 Air Compressor – 15HP R-Series

    Champion HR15-12 Air Compressor – 15HP R-Series

    $6,579.00
    In Stock
    Add to cart

    The Champion HR15-12 is built for facilities that require reliable compressed air throughout multiple shifts. Its R-40 pump offers greater displacement than standard R-30 models while operating at lower RPM, resulting in:

    • Lower operating temperatures
    • Reduced vibration and noise
    • Extended bearing and component life
    • Improved energy efficiency
    • Longer maintenance intervals

    The large 120-gallon tank helps stabilize air pressure during peak demand and reduces compressor cycling, improving overall system efficiency.

  • Chicago Pneumatic RCP-1630G Air Compressor – 16HP Gasoline

    Chicago Pneumatic RCP-1630G Air Compressor – 16HP Gasoline

    $5,399.00
    In Stock
    Add to cart
    Chicago Pneumatic RCP-1630G Air Compressor: High-output 16HP gasoline-powered service truck compressor featuring a Vanguard engine, designed to deliver professional-grade pneumatic power in remote field locations.
    • Engine Specs: 16.0 HP Briggs & Stratton Vanguard
    • Pneumatic Supply: 991 L/min (35.0 CFM)
    • Maximum Force: 175 PSI (12 Bar)
    • Tank Dimension: 30 Gallon Horizontal
    • Technical Spec: 12V Electric Start & Recoil Backup
  • EMAX ERI0050001 – Industrial Rotary Screw Compressor

    EMAX ERI0050001 – Industrial Rotary Screw Compressor

    $4,599.00
    In Stock
    Add to cart

    The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:

    • Stable airflow without pressure spikes
    • Lower noise compared to reciprocating compressors
    • Reduced vibration and mechanical wear
    • Better efficiency in constant-demand environments

    It is especially useful where air demand never fully stops, such as:

    • Small manufacturing lines
    • CNC machines (light duty)
    • Packaging equipment
    • Continuous workshop air systems
    • Multi-tool pneumatic stations
  • Chicago Pneumatic RCP-C7583VS Air Compressor – 7.5HP 80Gal

    Chicago Pneumatic RCP-C7583VS Air Compressor – 7.5HP 80Gal

    $2,589.00
    In Stock
    Add to cart
    Chicago Pneumatic RCP-C7583VS: Industrial 7.5HP vertical system featuring an “Iron Series” pump and 3-phase motor for high-cycle automotive shop environments.
    • Motor Specs: 7.5 HP 3-Phase
    • Airflow Volume: 680 L/min (24.0 CFM)
    • Pressure Peak: 175 PSI (12 Bar)
    • Tank Orientation: 80 Gallon Vertical
    • System Extra: Magnetic Starter Pre-Wired
  • Champion HR20D-25 Air Compressor – 20HP R-Series

    Champion HR20D-25 Air Compressor – 20HP R-Series

    $19,499.00
    In Stock
    Add to cart

    The Champion HR20D-25 is designed for facilities where compressed air is a critical utility powering multiple production systems simultaneously. Its duplex configuration provides operational flexibility:

    • One compressor can handle base load demand
    • Both compressors operate during peak usage
    • Built-in redundancy ensures uninterrupted production

    The R-70 pump design operates at low RPM, reducing internal heat buildup and extending bearing and piston life. The large 250-gallon receiver tank helps stabilize pressure fluctuations, reducing cycling frequency and improving overall efficiency.

Related products

  • BelAire 338H Air Compressor – 10HP Horizontal

    BelAire 338H Air Compressor – 10HP Horizontal

    $3,249.00
    In Stock
    Add to cart
    The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
  • Campbell Hausfeld CE8003 – 15 HP Two-Stage Air Compressor

    Campbell Hausfeld CE8003 – 15 HP Two-Stage Air Compressor

    $4,649.00
    In Stock
    Add to cart
    Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
    • Engine Specs: 15.0 HP Two-Stage
    • Airflow Volume: 1415 L/min (50.0 CFM)
    • Force Rating: 175 PSI (12 Bar)
    • Cylinder Capacity: 120 Gallon Horizontal
    • Grid Spec: 230/460V 3-Phase
  • Campbell Hausfeld GR2100 – Gas 2-in-1 Air Compressor

    Campbell Hausfeld GR2100 – Gas 2-in-1 Air Compressor

    $6,049.00
    In Stock
    Add to cart
    Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
    • Engine Specs: Honda GX200 Gas
    • Airflow Volume: 405 L/min (14.3 CFM)
    • Power Output: 5000W Peak / 4000W Cont.
    • Force Rating: 175 PSI (12 Bar)
    • Tank Dimension: 30 Gallon Horizontal
  • Campbell Hausfeld GR3200 – Gas 3-in-1 Air Compressor

    Campbell Hausfeld GR3200 – Gas 3-in-1 Air Compressor

    $4,969.00
    In Stock
    Add to cart
    Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
    • Utility Module: Air / Power / Welder
    • Flow Performance: 453 L/min (16.0 CFM)
    • Welding Range: 50 – 210 Amps DC
    • Storage Build: 30 Gallon ASME Tank
    • Engine Type: Honda GX390 Gas
  • BelAire 4112D Air Compressor – 12HP Duplex

    BelAire 4112D Air Compressor – 12HP Duplex

    $5,879.00
    In Stock
    Add to cart

    The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.

    The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.

  • BelAire 438VE Air Compressor – 8HP Vertical

    BelAire 438VE Air Compressor – 8HP Vertical

    $3,599.00
    In Stock
    Add to cart
    BelAire 438VE Air Compressor: Elite-Series 8HP vertical compressor upgraded with a low-oil safety switch and aftercooler for superior moisture control and durability.
    • Elite Drive: 8HP Protected Motor
    • Volume Delivery: 716 L/min (25.3 CFM)
    • Compression Limit: 175 PSI (12 Bar)
    • Vessel Size: 60 Gallon Vertical
    • Safety Module: Aftercooler & Low-Oil