4274-21 
438VE Subtotal: $5,398.00
EMAX ERIK150003 – 3PH Rotary Screw Air Compressor
$14,699.00
The ERIK150003 is designed for continuous industrial air demand, where piston compressors would fail due to cycling limits and heat buildup. The rotary screw system provides:
- Constant airflow without pressure dips
- No start/stop cycling (reduces wear significantly)
- High efficiency at long runtime
- Much quieter operation than reciprocating compressors
Its ~60 CFM output allows it to support:
- Multiple CNC machines
- Automated production equipment
- Packaging lines
- Multi-user workshop air systems
- Continuous pneumatic tooling
In Stock
Free Standard Shipping Worldwide
|
US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
Description
The ERIK150003 is designed for continuous industrial air demand, where piston compressors would fail due to cycling limits and heat buildup. The rotary screw system provides:
- Constant airflow without pressure dips
- No start/stop cycling (reduces wear significantly)
- High efficiency at long runtime
- Much quieter operation than reciprocating compressors
Its ~60 CFM output allows it to support:
- Multiple CNC machines
- Automated production equipment
- Packaging lines
- Multi-user workshop air systems
- Continuous pneumatic tooling
| Specification | Details |
|---|---|
| Model | EMAX ERIK150003 |
| Type | Rotary Screw Air Compressor |
| Motor Power | 15 HP |
| Phase | 3-Phase (208–230V / 460V) |
| Pump Type | Oil-injected rotary screw |
| Tank Capacity | 120 Gallons |
| Duty Cycle | 100% Continuous |
| Cooling System | Air/oil radiator |
| Control System | Logic 9 PLC controller |
| Dryer | Integrated refrigerated dryer (system dependent) |
| Application | Industrial / Production / Workshop |
You may also like…
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications. -
The HPL25-12 is designed specifically for extreme-duty industrial applications where compressed air is a mission-critical utility. Unlike conventional splash-lubricated compressors, the PL-Series utilizes a full pressure lubrication system that continuously supplies filtered oil to crankshaft bearings, connecting rods, and critical internal components. This design significantly reduces wear and extends equipment life under continuous operation.The compressor's 90.1 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Large fabrication facilities
- Automated production lines
- Industrial blast and finishing systems
- Packaging and processing plants
- Centralized compressed air networks
Its low pump speed of approximately 770 RPM helps minimize heat generation, vibration, and component wear, contributing to long-term reliability.
-
The Champion HPL5D-8 is engineered for businesses that require reliable compressed air without moving to larger industrial compressor systems. The duplex design provides significant operational advantages, including reduced wear through alternating compressor cycles and increased airflow capacity during peak demand periods.
The pressure-lubricated PL-Series pumps continuously circulate filtered oil to bearings, crankshafts, and other critical components, significantly extending pump life and improving reliability in continuous-use environments.
With approximately 34 CFM at 175 PSI, the HPL5D-8 can efficiently support:
- Multiple pneumatic tools simultaneously
- Automotive repair bays
- Tire service equipment
- Maintenance workshops
- Light manufacturing operations
- Small production lines
-
The HER10-12 is designed for facilities that need industrial-grade compressed air without the noise impact of traditional piston compressors. Its enclosed design allows it to be installed near production areas, reducing piping distance and pressure loss while improving system efficiency.
The RP30D two-stage pump provides stable airflow and long service life, while the enclosure uses engineered airflow channels and cooling fans to manage heat buildup during continuous operation.
This makes it ideal for:
- Automotive workshops with multiple bays
- Manufacturing and assembly facilities
- CNC machining support systems
- Production environments requiring low noise
-
The EI07V080V1 is built for serious shop air demand, offering significantly higher airflow than typical 7.5 HP compressors. Its strength comes from:
- High airflow (~31 CFM) suitable for multiple pneumatic tools
- Two-stage compression for improved efficiency and cooler operation
- Pressure-lubricated pump system for longer lifespan
- Large 80-gallon tank to stabilize pressure during peak demand
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication and welding shops
- Maintenance facilities
- Multi-tool workshop environments
It is not intended for continuous heavy-duty industrial processes like large-scale sandblasting or production-line compressed air systems.
Related products
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications. -
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
-
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
Reviews
There are no reviews yet.