EMAX ESP10A080V1 – Vertical Solo Mount Silent Air Compressor

Description

EMAX ESP10A080V1 – Silent Air 10 HP Vertical 2-Stage Compressor (80 Gallon)

The EMAX ESP10A080V1 (often closely related to the ESP10V080V1 platform) is a heavy-duty Silent Air / Whisper Series industrial piston compressor designed for workshops that need very high airflow, reduced noise, and continuous-duty capability in a single-phase system.

It uses EMAX’s patented Silent Air intake silencing system, which reduces compressor intake noise by channeling air through multi-stage baffle filtration, making it significantly quieter than conventional 10 HP piston compressors.

This unit is built around a 10 HP industrial electric motor, a two-stage cast iron pressure-lubricated pump, and an 80-gallon ASME vertical tank, delivering approximately 38 CFM at 100 PSI with a maximum pressure of 175 PSI.

Key Features

• 10 HP industrial single-phase electric motor (230V)
• Silent Air / Whisper intake noise reduction system (up to ~35–50% quieter vs standard piston compressors)
• Heavy-duty two-stage cast iron, pressure-lubricated pump
• Air delivery: ~38 CFM @ 100 PSI
• Maximum pressure: 175 PSI
• 80-gallon ASME-certified vertical steel tank
• Low-RPM pump design (~730–800 RPM range depending on variant)
• Belt-driven industrial system with magnetic starter
• Automatic or continuous run capability (depending on setup)
• Heavy-duty cooling and lubrication system for long service life

Advantages

Silent Air Intake System

Reduces noise by routing intake air through multi-baffle filtration chambers.

High Airflow Output (38 CFM Class)

Strong enough for multi-user workshop environments.

Industrial Cast Iron Pump

Built for durability and long service life under daily operation.

80-Gallon Stability

Reduces pressure drop and compressor cycling frequency.

Ideal Applications

• Automotive workshops
• Tire service centers
• Fabrication shops
• Maintenance facilities
• Paint and body shops
• Industrial garages needing quieter operation

EMAX ESP10A080V1 – Vertical Solo Mount Silent Air Compressor: Buying Considerations

The ESP10A080V1 is designed for high-output workshop environments where noise control matters. Compared to standard 10 HP compressors, its key advantage is not only airflow but also:

Much lower intake noise (the loudest part of piston compressors)
Stable high-volume airflow (~38 CFM class)
Reduced vibration due to low-RPM pump design
Better suitability for indoor or attached-shop installations

Before ordering the EMAX ESP10A080V1 – Vertical Solo Mount Silent Air Compressor from EMAX, review the points below against your actual site conditions and workload. Published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions. Buyers in the United States, Canada, and Asia should also confirm local voltage and frequency requirements, applicable safety or emissions standards, and freight or import logistics for the destination before finalizing an order.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location. Keep the supplier data sheet and any acceptance criteria on record for future maintenance and replacement decisions.