EMAX ESP10D240V3 – Silent V4 3PH Horizontal Dual Piston Compressor

Description

Emax ESP10D240V3 | 68 CFM at 90 PSI Industrial Delivery Analysis

The Emax ESP10D240V3 Silent V4 is a massive horizontal dual-piston system designed for high-capacity manufacturing requiring extreme air reserves and redundancy. Utilizing a 240-gallon tank and three-phase power, this dual-pump configuration provides unmatched pneumatic overhead, delivering a steady 68 CFM at 90 PSI to support entire production lines and large-scale pneumatic grids.

This dual-pump setup features pressure lubrication and an electronic automatic drain valve to handle intensive 60% duty cycles across a massive storage volume. Since the unit lacks a low oil shutdown feature, maintenance crews must prioritize regular lubricant inspections to prevent terminal air-end friction and ensure maximum thermal stability during peak industrial operation hours.

Key Features: Emax ESP10D240V3

• Dual 10HP pumps produce 68 CFM at 90 PSI.
• Massive 240-gallon horizontal tank provides exceptional air reserves.
• Silent V4 technology significantly lowers noise in industrial bays.
• Electronic automatic drain valve automates critical tank maintenance.
• Three-phase 230/460V configuration optimizes high-torque electrical efficiency.
• Large 2 inch NPT outlet prevents restrictive airflow bottlenecks.
• Pressure lubrication system protects internal components under load.
• Two-stage pump design allows for 175 Max PSI.
• Solid cast iron pump material ensures extreme industrial durability.
• Dual-pump architecture provides built-in system redundancy for facilities.

High-Volume Manufacturing Operations

Perfect for heavy-duty assembly lines, large fabrication shops, and centralized air systems. This model is backed by a 1 year warranty. Compare our horizontal air compressors to match this 240-gallon capacity with your facility’s specific SCFM requirements.

EMAX ESP10D240V3 – Silent V4 3PH Horizontal Dual Piston Compressor: Buying Considerations

EMAX ESP10D240V3: The flagship of the dual-pump series, this 3-phase 240-gallon unit offers the highest storage capacity and performance for heavy-duty industrial automation.

Motor Specs: 10.0 HP 3-Phase
Flow Capacity: 962 L/min (34 CFM @ 100 PSI)
Force Rating: 175 PSI (12 Bar)
Cylinder Size: 240 Gallon Horizontal
Elite Module: Premium Silent Air Baffle System

Before ordering the EMAX ESP10D240V3 – Silent V4 3PH Horizontal Dual Piston Compressor from EMAX, review the points below against your actual site conditions and workload – published specifications describe the equipment under test conditions, and real-world performance depends on how closely your application matches those conditions.

What to Check Before You Buy

• Total the real CFM demand of every tool that could run at the same time, then add reserve capacity for leaks and future tools – not just the single largest tool's rating.
• Confirm voltage and phase availability (120V/240V, single/three-phase) matches the compressor's electrical requirement.
• Check tank size relative to duty cycle – a larger tank reduces motor cycling on intermittent loads but does not substitute for adequate CFM on continuous-demand tools.
• Review noise rating if the compressor will run in an occupied or noise-sensitive space.

Does tank size matter more than CFM for a shop air compressor?

CFM output matters more for continuous-demand tools (sanders, grinders); tank size matters more for intermittent high-draw tools (impact wrenches, nail guns) where the tank supplies a burst faster than the motor could alone. Undersized CFM cannot be fixed by a bigger tank if the tool's continuous demand exceeds the compressor's output.

For sizing help across the full Compressor category, compare specifications side by side before committing to a specific model, and confirm current pricing, availability, and freight details for your location.