EMAX ERI0050001 – Industrial Rotary Screw Compressor
$2,444.00
The ERI0050001 is designed for steady, non-stop air demand, which is where rotary screw technology performs best. Instead of cycling on and off like piston compressors, it runs continuously at controlled RPM, providing:
- Stable airflow without pressure spikes
- Lower noise compared to reciprocating compressors
- Reduced vibration and mechanical wear
- Better efficiency in constant-demand environments
It is especially useful where air demand never fully stops, such as:
- Small manufacturing lines
- CNC machines (light duty)
- Packaging equipment
- Continuous workshop air systems
- Multi-tool pneumatic stations
In Stock
Description
EMAX ERI0050001 – Industrial Rotary Screw Air Compressor (5 HP, Cabinet Type)
The EMAX ERI0050001 is a compact industrial rotary screw air compressor designed for facilities that require continuous airflow, low noise operation, and high duty-cycle performance. Unlike piston compressors, this model uses a rotary screw air-end system, making it suitable for 100% duty cycle applications where air demand is constant.
It is part of the EMAX Industrial Rotary Screw Series, featuring a soundproof steel cabinet, a 5 HP industrial electric motor, and a belt-driven oil-injected rotary screw air-end. The system is engineered for long service life, stable pressure output, and reduced maintenance requirements compared to reciprocating compressors.
This unit delivers approximately 19.4 CFM at 100 PSI with a maximum pressure of 145 PSI, making it ideal for small industrial plants, production lines, and workshops requiring continuous compressed air supply.
Key Features
- 5 HP industrial electric motor (230V, single-phase)
- Oil-injected rotary screw air-end system
- Air delivery: ~19.4 CFM @ 100 PSI
- Maximum pressure: 145 PSI
- 100% duty cycle capability (continuous operation)
- Soundproof industrial cabinet for low noise operation
- Belt-drive system with 1750 RPM motor design
- PLC smart controller (Logik 9 system) for pressure and scheduling control
- High-efficiency oil/air cooling system (aftercooler included)
- Designed for stationary industrial installation (tank not included)
Advantages
100% Duty Cycle Operation
Built to run continuously without overheating under proper maintenance.
Rotary Screw Efficiency
Smooth, steady airflow with minimal pressure fluctuation.
Soundproof Cabinet Design
Significantly quieter than piston-based compressors.
Industrial Control System
Smart controller enables scheduling, monitoring, and system optimization.
Ideal Applications
- Small industrial plants
- Continuous production workshops
- CNC and automation support systems
- Packaging and assembly lines
- Professional fabrication shops
| Specification | Details |
|---|---|
| Model | EMAX ERI0050001 |
| Type | Rotary Screw Air Compressor |
| Motor Power | 5 HP |
| Air Delivery | ~19.4 CFM @ 100 PSI |
| Max Pressure | 145 PSI |
| Pump Type | Oil-injected rotary screw |
| Drive Type | Belt-driven |
| Duty Cycle | 100% continuous |
| Tank | Not included (standalone cabinet unit) |
| Cooling | Air/oil radiator + aftercooler |
| Application | Industrial / Production / Workshop |
You may also like…
-
The ESP10A080V1 is designed for high-output workshop environments where noise control matters. Compared to standard 10 HP compressors, its key advantage is not only airflow but also:
- Much lower intake noise (the loudest part of piston compressors)
- Stable high-volume airflow (~38 CFM class)
- Reduced vibration due to low-RPM pump design
- Better suitability for indoor or attached-shop installations
-
The HPL30-24 is designed for facilities where compressed air is a critical utility supporting production, automation, and manufacturing processes. Its 101 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Automated manufacturing lines
- Industrial blast and finishing systems
- Large fabrication workshops
- Packaging and processing facilities
- Facility-wide compressed air networks
- Multi-shift production environments
The large 240-gallon receiver tank helps stabilize system pressure during peak demand, reducing compressor cycling and improving overall efficiency. Meanwhile, the pressure-lubricated PL-70 pump continuously delivers filtered oil to critical internal components, significantly extending service life under continuous operation.
-
The HDR5-8Y is built for true off-grid compressed air performance, eliminating dependency on electrical infrastructure. The R-Series pump is designed with heavy-duty internal components including intercooling, disc valves, and cast iron construction, ensuring stable airflow and long operational life.
Its engine-driven design makes it ideal for service trucks and remote job sites, where reliability and mobility are more important than stationary high-volume output.
-
The Champion HPL7DF-12 is designed for businesses that require dependable compressed air throughout the workday without sacrificing reliability. The duplex configuration offers operational flexibility by alternating compressor operation during normal usage, reducing wear and extending equipment life. During periods of high demand, both compressors can operate simultaneously to maximize airflow output.
The pressure-lubricated PL-Series pumps continuously circulate oil to critical components such as crankshafts, bearings, and connecting rods, providing superior protection compared to traditional splash-lubricated systems.
With approximately 50–52 CFM output, the HPL7DF-12 can support:
- Multiple pneumatic tools simultaneously
- Automotive repair and tire service operations
- CNC machinery support systems
- Fabrication and welding workshops
- Industrial maintenance departments
- Light manufacturing production lines
-
The ERIK150003 is designed for continuous industrial air demand, where piston compressors would fail due to cycling limits and heat buildup. The rotary screw system provides:
- Constant airflow without pressure dips
- No start/stop cycling (reduces wear significantly)
- High efficiency at long runtime
- Much quieter operation than reciprocating compressors
Its ~60 CFM output allows it to support:
- Multiple CNC machines
- Automated production equipment
- Packaging lines
- Multi-user workshop air systems
- Continuous pneumatic tooling
-
The ESP05V080I1PK is designed for quiet, stable, and clean compressed air delivery in professional environments.
Typical applications:
- Automotive workshops
- Tire and detailing shops
- Small fabrication facilities
- Paint and finishing systems
- Light industrial maintenance
- Shops requiring quiet operation indoors
Related products
-
The BelAire 3G3HKL is engineered for technicians who need reliable compressed air in the field. Its gas-powered engine eliminates dependence on electricity, while the two-stage pump ensures stable pressure and efficient air delivery even under heavy load.
The 30-gallon tank provides a balance between portability and usable air reserve, making it ideal for service vehicles and mobile repair units.
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.
- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.
- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
The BelAire 6312D is designed for continuous-duty environments where air demand is high and downtime is not acceptable. Its duplex configuration allows one pump to handle light loads while both engage during peak demand, improving efficiency and extending service life.
The cast iron pump construction ensures durability under high heat and continuous cycling, while the 120-gallon tank stabilizes air delivery across multiple production lines or heavy tool usage.
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
-
The BelAire 6312HE horizontal air compressor resolves manufacturing thermal management bottlenecks, utilizing a high-output 20 HP motor and integrated aftercooler to preserve clean, cool tool lines continuously.
- Massive free air capacity of 64.5.
- Steady 175 Psi peak working pressure.
- Heavy 120 gallon horizontal storage reservoir.
- Pre installed magnetic starter protects circuitry.
- Splash lubricated two stage reciprocating pump.
Reviews
There are no reviews yet.