Chicago Pneumatic RCP-C1430G Air Compressor – 14HP Iron
$2,678.00
The Chicago Pneumatic RCP-C1430G gasoline-powered compressor addresses remote industrial field maintenance constraints, leveraging a rugged 14 HP Kohler engine block to preserve high-pressure pneumatic tool paths without facility power drops.
- High torque 14 HP Kohler engine.
- Steady free air capacity of 25.3.
- Maximum system pressure of 175 Psi.
- Compact 30 gallon horizontal storage tank.
- Convenient integrated automated electric start ignition.
In Stock
Description
Chicago Pneumatic RCP-C1430G Air Compressor – 14 HP Iron Series Gas Driven Compressor
The Chicago Pneumatic RCP-C1430G Air Compressor is a heavy-duty 14 HP gasoline-powered two-stage reciprocating compressor from Chicago Pneumatic’s Iron Series, engineered for contractors, service trucks, construction crews, and remote job sites that require dependable compressed air without electrical power.
Built with a rugged all cast iron pump system, this model is designed for durability, low RPM operation, and long service life in harsh working environments. It comes equipped with a 14 HP Kohler gasoline engine, a two-stage cast iron compressor pump, and a 30-gallon ASME-certified horizontal air receiver tank, making it a compact yet powerful mobile air solution.
This compressor delivers approximately 23 CFM at 100 PSI (up to 175 PSI maximum system pressure), making it suitable for powering pneumatic tools, impact wrenches, nail guns, and light blasting equipment in field applications.
Key Features
- 14 HP Kohler gasoline engine
- Heavy-duty two-stage cast iron compressor pump
- Air delivery: ~23 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 30-gallon ASME-certified horizontal air receiver tank
- Electric start + recoil start system (configuration dependent)
- Engine slowdown (pilot valve) for fuel efficiency
- Fully enclosed belt guard for operator safety
- Heavy-duty cast iron cylinders, crankcase, and valve plates
- Designed for mobile and truck-mounted applications
Performance Overview
The RCP-C1430G is designed for off-grid industrial air supply, where portability and reliability are critical. Its low-RPM cast iron pump reduces internal heat and mechanical stress, improving durability during long operating hours in demanding field conditions.
Key advantages include:
- Strong airflow for portable pneumatic tools
- Reliable engine-driven operation without electricity
- Durable cast iron construction for harsh environments
- Compact footprint suitable for truck mounting
Typical applications include:
- Construction sites
- Mobile repair and service trucks
- Infrastructure maintenance
- Field fabrication work
- Light sandblasting and surface preparation
Iron Series Advantages
Heavy-Duty Cast Iron Pump
Built for maximum durability under continuous load conditions.
Mobile Independence
Gas engine allows operation anywhere without electrical infrastructure.
Two-Stage Efficiency
Improved cooling and compression efficiency compared to single-stage systems.
Field-Ready Design
Built to withstand vibration, transport, and outdoor exposure.
Ideal Applications
- Construction and infrastructure projects
- Mobile service trucks
- Remote job sites
- Industrial field maintenance
- Light blasting and pneumatic tools
- Utility and repair operations
| Specification | Details |
|---|---|
| Model | Chicago Pneumatic RCP-C1430G |
| Series | Iron Series Gas Drive |
| Engine | 14 HP Kohler Gasoline Engine |
| Compressor Type | Two-Stage Cast Iron Piston |
| Fuel Type | Gasoline |
| Air Delivery | ~23 CFM @ 100 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 30 Gallons |
| Tank Orientation | Horizontal |
| Start System | Electric / Recoil (variant dependent) |
| Duty Cycle | Heavy-Duty Mobile Use |
| Application | Construction / Service Truck / Field Work |
You may also like…
-
Chicago Pneumatic RCP-4961VNS Air Compressor: Efficient 5HP vertical compressor featuring a 60-gallon tank, engineered for small-to-medium automotive shops requiring reliable air in a space-saving footprint.- Drive Strength: 5.0 HP Single-Phase
- Flow Performance: 433 L/min (15.3 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Vessel Size: 60 Gallon Vertical
- Build Quality: Solid Cast Iron Two-Stage Pump
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
Unlike standard compressors, the BelAire 3312D uses two separate compressor pumps mounted on a single tank. During low air demand, only one compressor operates, reducing energy consumption. As demand increases, the second compressor automatically engages to maintain consistent air pressure and airflow. This design also provides backup capability, allowing one compressor to continue operating if the other requires maintenance.
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase.
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
-
The BR26 sits in Champion’s upper industrial reciprocating range, designed for facilities that need high-volume compressed air without moving to rotary screw systems.
Its R-Series pump uses a robust mechanical design with:
- Intercoolers between stages for efficiency
- Heavy-duty crankshaft and bearings for long life
- Disc valves for high airflow stability
- Splash lubrication for simpler maintenance
This makes it ideal for operations requiring consistent pressure under continuous load conditions.
Related products
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures.
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
BelAire 6G3HV Air Compressor: Compact 3HP vertical unit designed to maximize shop floor space while providing reliable pneumatic power for small-scale automotive tasks.
- Motor Efficiency: 3HP High-Efficiency
- Pneumatic Supply: 320 L/min (11.3 CFM)
- Force Rating: 135 PSI (9.3 Bar)
- Tank Orientation: 60 Gallon Vertical
- Build Design: Solid Cast Iron
Reviews
There are no reviews yet.