Campbell Hausfeld GR2100 – Gas 2-in-1 Air Compressor
$3,000.00
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
In Stock
Description
Campbell Hausfeld GR2100 – Gas 2-in-1 Air Compressor / Generator (Truck-Mount Unit)
The Campbell Hausfeld GR2100 is a heavy-duty gas-powered 2-in-1 air compressor and generator system designed for job sites, service trucks, and emergency field operations where both compressed air and electrical power are needed in one integrated unit. It combines a two-stage cast iron air compressor with a 5,000-watt generator system, powered by a reliable Honda GX390 gasoline engine.
This makes it a true mobile industrial power solution for contractors, maintenance crews, and remote work environments.
Key Features
- Honda GX390 gasoline engine (industrial-grade reliability)
- 2-in-1 system: air compressor + electric generator
- Two-stage cast iron compressor pump for durability and efficiency
- Air output: ~14.3 CFM @ 90 PSI / 13.7 CFM @ 175 PSI
- Maximum pressure: 175 PSI
- Generator output: 5,000W continuous / 6,000W surge power
- 10-gallon twin-tank system (compact mobile design)
- Heavy-duty steel frame and belt guard for job site protection
- Low-oil shutdown and auto-idle fuel-saving system
- Built for continuous jobsite use and mobile service operations
Performance Overview
The GR2100 is built for multi-function mobile power needs, allowing operators to run pneumatic tools while also powering electrical equipment such as lights, grinders, or chargers.
Its dual-function design reduces the need for separate machines on service trucks, making it especially valuable for field technicians, emergency repair crews, and construction teams working in remote locations.
However, due to its 10-gallon tank size, it is better suited for intermittent air tool use rather than continuous high-demand air systems.
Ideal Applications
- Service trucks and mobile repair units
- Construction and infrastructure work
- Emergency response and disaster recovery
- Field maintenance operations
- Remote job sites without grid power
- Utility and municipal maintenance crews
| Specification | Details |
|---|---|
| Model | GR2100 |
| Engine | Honda GX390 (Gasoline) |
| Compressor Type | Two-Stage Cast Iron |
| Tank Capacity | 10 Gallons |
| Air Delivery | 13.7–14.3 CFM |
| Max Pressure | 175 PSI |
| Generator Output | 5,000W (continuous) |
| Voltage Output | 120V / 240V |
| Application | Mobile / Jobsite / Service Truck |
You may also like…
-
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
-
The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to:
- Run multiple pneumatic tools at the same time
- Maintain stable pressure under intermittent heavy load
- Reduce compressor cycling due to large tank reserve
- Improve efficiency compared to single-stage compressors
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
BelAire 6G3HV Air Compressor: Compact 3HP vertical unit designed to maximize shop floor space while providing reliable pneumatic power for small-scale automotive tasks.
- Motor Efficiency: 3HP High-Efficiency
- Pneumatic Supply: 320 L/min (11.3 CFM)
- Force Rating: 135 PSI (9.3 Bar)
- Tank Orientation: 60 Gallon Vertical
- Build Design: Solid Cast Iron
Related products
-
Champion ADVA-D38 Air Compressor: Industrial 5HP Advantage Series unit featuring a splash-lubricated R-Series pump and a pre-installed magnetic starter for immediate professional use.
- Motor Strength: 5.0 HP High-Torque
- Discharge Rate: 490 L/min (17.3 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Orientation: 60 Gallon Vertical
- Technical Spec: R-15B Splash Pump
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications.
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance.
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
-
The BelAire 318HN is engineered to provide reliable compressed air for demanding industrial environments. Its two-stage compression system increases efficiency while reducing operating temperatures, helping extend pump life and improve long-term reliability. The large 80-gallon air receiver minimizes cycling and maintains stable pressure during high-demand applications.
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
Reviews
There are no reviews yet.