438VE Subtotal: $3,599.00
EMAX EGES1860ST – Industrial Plus Gas 2-Stage Air Compressor
$7,999.00
The EGES1860ST is built for serious mobile air demand, especially where multiple pneumatic tools must run simultaneously. Its high CFM output allows it to support:
- Framing nailers and roofing tools
- Impact wrenches and air ratchets
- Light sandblasting setups
- Industrial maintenance tools in the field
Key performance strengths:
- High airflow for multi-tool operation
- Stable pressure under continuous jobsite load
- Engine-driven independence (no electrical supply needed)
- Low RPM pump reduces wear and heat buildup
In Stock
Free Standard Shipping Worldwide
|
US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
Description
The EGES1860ST is built for serious mobile air demand, especially where multiple pneumatic tools must run simultaneously. Its high CFM output allows it to support:
- Framing nailers and roofing tools
- Impact wrenches and air ratchets
- Light sandblasting setups
- Industrial maintenance tools in the field
Key performance strengths:
- High airflow for multi-tool operation
- Stable pressure under continuous jobsite load
- Engine-driven independence (no electrical supply needed)
- Low RPM pump reduces wear and heat buildup
| Specification | Details |
|---|---|
| Model | EMAX EGES1860ST |
| Engine | Honda GX630 18 HP |
| Pump Type | Two-stage cast iron, pressure lubricated |
| Max Pressure | 175 PSI |
| Tank Capacity | 60 Gallons |
| Tank Type | Horizontal ASME |
| Start System | Electric start |
| Duty Cycle | Contractor / Industrial |
| Application | Construction / Mobile service / Field work |
You may also like…
-
The Champion HR7D-12 is built for environments where consistent airflow and operational redundancy are important. The duplex configuration allows:
- Alternating operation to balance wear between pumps
- Simultaneous operation during peak air demand
- Improved uptime and reduced downtime risk
The R-30 pumps are designed for low-RPM operation, which helps reduce internal heat, vibration, and long-term wear—making the system highly reliable for daily industrial use.
-
The DXCM602 is built around a high-pressure single-stage system, which gives it a key advantage: it stores more usable air in the tank compared to lower-pressure 135 PSI compressors. This helps reduce compressor cycling and improves tool runtime between refills.
However, its real performance strength is its 11.5 SCFM output, which places it in the light-to-medium shop class:
- Good for impact wrenches (intermittent use)
- Suitable for spray painting (light to moderate duty)
- Works for tire service and general maintenance
- Not ideal for continuous high-demand tools like sandblasting or heavy grinders
-
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
- Longer tool runtime before the compressor restarts
- Faster recovery for small air tools
- Better efficiency for intermittent use
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
- Nail guns and staplers
- Tire inflation and blow guns
- Small impact tools (intermittent use)
- Light painting or airbrushing (limited duty)
It is not intended for continuous tools like grinders or sandblasting equipment.
-
The DXCMH1393075 is designed for field operations where electrical power is unavailable or impractical. Its main strength is high airflow in a portable gas-driven platform, allowing it to run multiple pneumatic tools at the same time.
Key performance characteristics:
- Strong airflow for framing, nailing, and impact tools
- Stable pressure output for continuous jobsite use
- Engine-driven independence for remote work
- Durable cast iron pump designed for harsh environments
-
The HDR5-8Y is built for true off-grid compressed air performance, eliminating dependency on electrical infrastructure. The R-Series pump is designed with heavy-duty internal components including intercooling, disc valves, and cast iron construction, ensuring stable airflow and long operational life.
Its engine-driven design makes it ideal for service trucks and remote job sites, where reliability and mobility are more important than stationary high-volume output.
-
The HPL25-12 is designed specifically for extreme-duty industrial applications where compressed air is a mission-critical utility. Unlike conventional splash-lubricated compressors, the PL-Series utilizes a full pressure lubrication system that continuously supplies filtered oil to crankshaft bearings, connecting rods, and critical internal components. This design significantly reduces wear and extends equipment life under continuous operation.The compressor's 90.1 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Large fabrication facilities
- Automated production lines
- Industrial blast and finishing systems
- Packaging and processing plants
- Centralized compressed air networks
Its low pump speed of approximately 770 RPM helps minimize heat generation, vibration, and component wear, contributing to long-term reliability.
Related products
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
The BelAire 3G3HHL is engineered specifically for on-site compressed air needs, where portability is critical. Unlike electric compressors, this model can operate anywhere—making it ideal for roadside service trucks, remote construction sites, and agricultural machinery repair.
Its two-stage pump design ensures higher efficiency and better performance under continuous load, while the Honda engine is known for reliability and easy maintenance in harsh working environments
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance. -
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase. -
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
Reviews
There are no reviews yet.