Champion HR30D-24 Air Compressor – 30HP R-Series
$15,400.00
The HR30-24 is designed for facilities that need plant-wide compressed air distribution rather than localized shop use. Its R-70 pump platform is optimized for low RPM operation, which improves long-term durability by reducing:
- Mechanical stress on bearings and crankshaft
- Heat buildup during continuous operation
- Vibration and structural fatigue
- Maintenance frequency over time
The 240-gallon receiver tank provides substantial air storage, helping stabilize pressure during peak demand and reducing compressor cycling. This is especially important in environments where multiple machines draw air simultaneously.
In Stock
Description
Champion HR30-24 Air Compressor – 30 HP R-Series Industrial Two-Stage Air Compressor (240 Gallon)
The Champion HR30-24 Air Compressor is a heavy-duty R-Series industrial reciprocating compressor engineered for large manufacturing plants, automotive production facilities, fabrication workshops, and centralized compressed air systems requiring very high airflow and continuous-duty reliability. It is powered by a 30 HP three-phase electric motor and equipped with Champion’s rugged R-70 two-stage cast iron compressor pump, mounted on a large 240-gallon ASME-certified horizontal air receiver tank.
Designed for high-demand industrial environments, the HR30-24 delivers approximately 200–205 CFM at 175 PSI, making it one of the highest-output single-frame R-Series systems available. This compressor is built for 24/7 operation in multi-shift production facilities where compressed air is critical to uptime and productivity.
Key Features
- 30 HP industrial three-phase electric motor
- Heavy-duty Champion R-70 two-stage cast iron compressor pump
- Air delivery: ~200–205 CFM @ 175 PSI
- Maximum operating pressure: 175 PSI
- Large 240-gallon ASME-certified horizontal air receiver tank
- Low-speed pump design (~907 RPM) for reduced wear and heat
- Splash-lubricated crankcase system for proven reliability
- High-efficiency disc valve technology
- Deep finned intercoolers for improved cooling
- Loadless centrifugal unloading system for safe starting
- Heavy-duty industrial control panel (configuration dependent)
- Continuous-duty operation for demanding environments
R-Series Advantages
Heavy-Duty Cast Iron Construction
Built for long service life under continuous industrial loads.
High Airflow Capacity
Delivers ~200+ CFM, suitable for large-scale production facilities.
Low-Speed Efficiency Design
Approximately 907 RPM operation reduces wear and improves longevity.
Proven Industrial Reliability
Widely used in manufacturing environments where downtime is costly.
Ideal Applications
- Manufacturing plants
- Automotive production facilities
- CNC machining operations
- Metal fabrication workshops
- Industrial maintenance departments
- Packaging and processing plants
- Large assembly lines
- Central compressed air systems
| Specification | Details |
|---|---|
| Model | Champion HR30-24 |
| Series | R-Series |
| Motor Power | 30 HP |
| Pump Model | R-70 |
| Compressor Type | Two-Stage Reciprocating |
| Lubrication | Splash Lubricated |
| Air Delivery | ~203 CFM @ 175 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 240 Gallons |
| Tank Orientation | Horizontal |
| Pump Speed | ~907 RPM |
| Voltage | 208V / 230V / 460V Three-Phase |
| Duty Cycle | Continuous Industrial Service |
| Application | Heavy Industrial Manufacturing |
You may also like…
-
The DXCMV7518075 is designed for serious workshop air demand, bridging the gap between small shop compressors and full industrial screw systems.
Its performance strengths include:
- Stable airflow for multiple pneumatic tools at once
- High-pressure storage (175 PSI) for longer tool runtime
- Lower cycling frequency due to large 80-gallon tank
- Improved efficiency from two-stage compression
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
- Longer tool runtime before the compressor restarts
- Faster recovery for small air tools
- Better efficiency for intermittent use
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
- Nail guns and staplers
- Tire inflation and blow guns
- Small impact tools (intermittent use)
- Light painting or airbrushing (limited duty)
It is not intended for continuous tools like grinders or sandblasting equipment.
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance.
-
The DXCM602 is built around a high-pressure single-stage system, which gives it a key advantage: it stores more usable air in the tank compared to lower-pressure 135 PSI compressors. This helps reduce compressor cycling and improves tool runtime between refills.
However, its real performance strength is its 11.5 SCFM output, which places it in the light-to-medium shop class:
- Good for impact wrenches (intermittent use)
- Suitable for spray painting (light to moderate duty)
- Works for tire service and general maintenance
- Not ideal for continuous high-demand tools like sandblasting or heavy grinders
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase.
Related products
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.
- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance.
-
Despite being a powerful shop compressor, the 418VL is known for relatively quiet operation compared to lighter-duty high-RPM compressors. The low-speed pump design reduces noise, vibration, and heat buildup, which helps extend service life and improves efficiency during long operating cycles.
Its 80-gallon tank also helps stabilize air pressure, reducing frequent motor cycling during heavy tool use.
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.
- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
BelAire 4312DL4 Air Compressor: Industrial 12HP Duplex system configured for 460V power, combining low-RPM quiet technology with dual-pump redundancy for heavy-duty service.
- Industrial Spec: 12HP Quiet Duplex
- Discharge Rate: 1274 L/min (45.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Voltage Requirement: 460V 3-Phase
-
BelAire 438V4 Air Compressor: Professional 8HP vertical compressor optimized for 460V industrial grids, providing reliable high-pressure air for automotive and manufacturing shops.
- Power Configuration: 8HP Industrial Grade
- Pneumatic Supply: 690 L/min (24.4 CFM)
- Operational Force: 150 PSI (10.3 Bar)
- Storage Type: 60 Gallon Vertical
- Grid Spec: 460V 3-Phase
Reviews
There are no reviews yet.