Chicago Pneumatic RCP-7581VS Air Compressor – 7.5HP 80Gal
$1,677.00
Chicago Pneumatic RCP-7581VS vertical reciprocating compressor resolves professional garage tool limits, forcing an exceptional volume of continuous high-pressure air through a space-saving footprint to eliminate single-phase circuit line lag.
- Supplies steady 25.3 CFM delivery rate.
- Space saving 80 gallon vertical tank.
- Robust 7.5 HP electric motor drive.
- Sustains 175 Psi peak tool pressure.
- Operates cleanly across 230V single phase.
In Stock
Description
Chicago Pneumatic RCP-7581VS Air Compressor – 7.5 HP Two-Stage (80 Gallon Vertical)
The Chicago Pneumatic RCP-7581VS Air Compressor is a professional-grade 7.5 HP two-stage reciprocating compressor from Chicago Pneumatic’s Iron Series, designed for automotive workshops, service centers, and light industrial environments that require reliable compressed air with consistent performance and long service life.
This model features a 7.5 HP electric motor, a heavy-duty cast iron two-stage pump, and an 80-gallon ASME-certified vertical air receiver tank, making it a compact yet powerful solution for shop air systems where space efficiency and output stability are both important.
Key Features
- 7.5 HP industrial electric motor (single or three-phase variants)
- Heavy-duty two-stage cast iron compressor pump
- Air delivery: ~23–25.3 CFM @ 100 PSI
- Maximum pressure: 175 PSI
- 80-gallon ASME-certified vertical air receiver tank
- Belt-driven system with protective safety guard
- Splash-lubricated pump design for durability
- Cast iron cylinders and crankshaft for long service life
- Magnetic motor starter (on many configurations)
- Built for continuous-duty workshop operation
Performance Overview
The RCP-7581VS is designed for users who need strong, consistent air delivery without moving into large commercial compressor systems. Its two-stage cast iron pump improves efficiency by compressing air in two stages, which reduces heat and increases overall durability.
Key performance advantages include:
- Stable airflow for multiple pneumatic tools
- Lower RPM operation for reduced wear
- Improved cooling and efficiency
- Reliable daily use in workshop environments
Typical applications include:
- Automotive repair shops
- Tire service centers
- Light fabrication shops
- Maintenance departments
- Small industrial production facilities
Iron Series Advantages
Heavy-Duty Cast Iron Construction
Built for long-term durability under frequent cycling and continuous use.
Two-Stage Compression Efficiency
Reduces heat and improves output stability compared to single-stage compressors.
Workshop-Ready Design
Ideal balance of size, airflow, and reliability for professional users.
Vertical Tank Efficiency
80-gallon vertical tank saves floor space while maintaining strong air storage capacity.
Ideal Applications
- Automotive workshops
- Tire service centers
- Light manufacturing operations
- Fabrication shops
- Maintenance departments
- General pneumatic tool systems
| Specification | Details |
|---|---|
| Model | Chicago Pneumatic RCP-7581VS |
| Series | Iron Series |
| Motor Power | 7.5 HP |
| Pump Type | Two-Stage Cast Iron |
| Lubrication | Splash Lubricated |
| Air Delivery | ~23–25.3 CFM @ 100 PSI |
| Maximum Pressure | 175 PSI |
| Tank Capacity | 80 Gallons |
| Tank Orientation | Vertical |
| Voltage | 208–230V / 460V (variant dependent) |
| Duty Cycle | Industrial / Workshop Use |
| Application | Automotive / Light Industrial |
You may also like…
-
Campbell Hausfeld CE8003: Elite 15HP two-stage air compressor engineered for 3-phase industrial power, delivering maximum CFM for the most intensive pneumatic workflows.- Engine Specs: 15.0 HP Two-Stage
- Airflow Volume: 1415 L/min (50.0 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 120 Gallon Horizontal
- Grid Spec: 230/460V 3-Phase
-
The Champion HR20-12 is engineered for facilities that require dependable compressed air throughout multiple shifts. Its R-70 compressor pump is specifically designed for larger industrial systems and delivers high airflow while maintaining low operating speeds. This combination helps provide:
- Lower operating temperatures
- Reduced vibration levels
- Extended bearing and piston life
- Improved reliability
- Reduced maintenance requirements
- Consistent airflow under heavy workloads
The 120-gallon receiver tank helps stabilize system pressure during peak demand periods and reduces compressor cycling, improving overall efficiency and equipment longevity.
-
BelAire 318H industrial air compressor with 5 HP motor, two-stage cast iron pump, and 80-gallon horizontal tank. Produces up to 18.5 CFM at 100 PSI and 175 PSI maximum pressure. Ideal for automotive shops, manufacturing facilities, maintenance departments, spray painting, and heavy-duty pneumatic tool applications.
-
Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments.
- Engine Specs: 11.0 HP Honda GX340
- Discharge Rate: 524 L/min (18.5 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 30 Gallon Horizontal
- Technical Logic: Fully Enclosed Belt Guard
-
The HPL25-12 is designed specifically for extreme-duty industrial applications where compressed air is a mission-critical utility. Unlike conventional splash-lubricated compressors, the PL-Series utilizes a full pressure lubrication system that continuously supplies filtered oil to crankshaft bearings, connecting rods, and critical internal components. This design significantly reduces wear and extends equipment life under continuous operation.
The compressor's 90.1 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Large fabrication facilities
- Automated production lines
- Industrial blast and finishing systems
- Packaging and processing plants
- Centralized compressed air networks
Its low pump speed of approximately 770 RPM helps minimize heat generation, vibration, and component wear, contributing to long-term reliability.
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation.
Related products
-
Campbell Hausfeld CE8001: Massive 10HP two-stage compressor featuring a large horizontal storage tank and industrial motor for high-volume commercial installations.
- Drive Strength: 10.0 HP Industrial
- Flow Performance: 991 L/min (35.0 CFM)
- Max Pressure: 175 PSI (12 Bar)
- Tank Dimension: 120 Gallon Horizontal
- Logic Setup: Single Phase 230V
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase.
-
BelAire 6320D Air Compressor: Massive 20HP Duplex configuration with dual-pump redundancy, engineered for mission-critical air supply and high-volume commercial service.
- Industrial Spec: 20HP (Twin 10HP)
- Flow Performance: 1954 L/min (69.0 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Dimension: 200 Gallon Horizontal
- Logic Setup: Alternating Dual-Drive
-
Campbell Hausfeld GR3200: Ultimate 3-in-1 service truck machine integrating a 175 PSI compressor, 5000W generator, and a 210A DC welder into a single compact footprint.
- Utility Module: Air / Power / Welder
- Flow Performance: 453 L/min (16.0 CFM)
- Welding Range: 50 – 210 Amps DC
- Storage Build: 30 Gallon ASME Tank
- Engine Type: Honda GX390 Gas
-
The BelAire 4918VN is designed for users who need consistent compressed air without stepping up to a large industrial duplex system. The two-stage compression system improves thermal efficiency and extends pump life, while the 80-gallon tank helps stabilize air pressure during tool usage.
It is especially popular in auto repair shops and small manufacturing setups, where reliability and simplicity are more important than extreme airflow capacity.
-
Campbell Hausfeld GR2100: Versatile 2-in-1 workstation powered by a Honda GX200 engine, combining a high-pressure air compressor with a 5000W generator for remote jobsites.
- Engine Specs: Honda GX200 Gas
- Airflow Volume: 405 L/min (14.3 CFM)
- Power Output: 5000W Peak / 4000W Cont.
- Force Rating: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
Reviews
There are no reviews yet.