951768 
438VE Subtotal: $10,198.00
Champion HPL10-24 Air Compressor – 10HP PL-Series
$10,099.00
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
In Stock
Free Standard Shipping Worldwide
|
US/CA 11–23 · AU 8–17 · Other countries 30–45 business days
Description
The HPL10-24 is built for centralized compressed air systems, not small workshop use. The large 240-gallon tank helps stabilize pressure across multiple production lines, reducing pressure drop during peak demand.
The PL-Series pressure lubrication system is a key advantage over standard splash-lubricated compressors. It continuously supplies oil to critical internal components, improving reliability and extending service life in continuous cycling environments.
This makes it suitable for facilities that require:
- Stable multi-station air distribution
- Long runtime with minimal downtime
- High durability under constant load conditions
| Specification | Details |
|---|---|
| Model | Champion HPL10-24 |
| Series | PL-Series (Pressure Lubricated) |
| Motor Power | 10 HP |
| Compressor | Type Two-Stage Cast Iron (Pressure Lubricated) |
| Pump Model | PL-30A |
| Tank Capacity | 240 Gallons |
| Tank Orientation | Horizontal |
| Voltage | 208/230V or 460V (3-phase) |
| Application | Industrial / Manufacturing / Continuous Duty Systems |
You may also like…
-
The Champion HR15-12 is built for facilities that require reliable compressed air throughout multiple shifts. Its R-40 pump offers greater displacement than standard R-30 models while operating at lower RPM, resulting in:
- Lower operating temperatures
- Reduced vibration and noise
- Extended bearing and component life
- Improved energy efficiency
- Longer maintenance intervals
The large 120-gallon tank helps stabilize air pressure during peak demand and reduces compressor cycling, improving overall system efficiency.
-
The HDPL5-3K is designed for high-reliability operation in environments where downtime is not acceptable. Unlike standard splash-lubricated compressors, its pressure lubrication system continuously feeds oil to critical moving components, reducing friction and extending service intervals.
This makes it especially effective for:
- Long-duration pneumatic tool use in the field
- Rough terrain construction sites
- Remote infrastructure maintenance
- Heavy equipment service operations
Its balance of airflow and portability makes it a strong alternative to larger stationary systems when mobility is required.
-
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
- Reduce pressure drops during tool use
- Support multiple intermittent air tools
- Improve recovery time compared to smaller compressors
- Maintain stable pressure during workshop demand peaks
-
The BelAire 338H is engineered for long service life and dependable operation in demanding work environments. Its cast iron pump construction provides superior durability, while the two-stage compression design improves efficiency and airflow delivery. The large 80-gallon receiver tank helps reduce compressor cycling, ensuring a stable air supply for continuous operation. -
The HR30-24 is designed for facilities that need plant-wide compressed air distribution rather than localized shop use. Its R-70 pump platform is optimized for low RPM operation, which improves long-term durability by reducing:
- Mechanical stress on bearings and crankshaft
- Heat buildup during continuous operation
- Vibration and structural fatigue
- Maintenance frequency over time
The 240-gallon receiver tank provides substantial air storage, helping stabilize pressure during peak demand and reducing compressor cycling. This is especially important in environments where multiple machines draw air simultaneously.
-
The HPL25-12 is designed specifically for extreme-duty industrial applications where compressed air is a mission-critical utility. Unlike conventional splash-lubricated compressors, the PL-Series utilizes a full pressure lubrication system that continuously supplies filtered oil to crankshaft bearings, connecting rods, and critical internal components. This design significantly reduces wear and extends equipment life under continuous operation.The compressor's 90.1 CFM output at 175 PSI allows it to support:
- Multiple CNC machining centers
- Large fabrication facilities
- Automated production lines
- Industrial blast and finishing systems
- Packaging and processing plants
- Centralized compressed air networks
Its low pump speed of approximately 770 RPM helps minimize heat generation, vibration, and component wear, contributing to long-term reliability.
Related products
-
The BelAire 3112D duplex air compressor eliminates system downtime bottlenecks by driving an alternating control panel across dual motors to secure fail-safe electrical redundancies inside single-phase industrial production shops. Combined free air delivery of 37 CFM. High pressure performance reaching 175 Psi. Massive 120 gallon horizontal storage tank. Dual 5 HP reciprocating pump configurations. Operates cleanly across 230V single phase. -
The BelAire 3312DL utilizes two independent compressor pumps and motors mounted on a single receiver tank. During periods of low air demand, only one compressor operates, reducing energy consumption and wear. When air demand increases, the second compressor automatically engages to maintain pressure and airflow. This intelligent duplex design extends equipment life while providing critical backup capability should one compressor require maintenance. -
The BelAire 4112D is engineered for high-demand environments where air downtime is not acceptable. Its duplex configuration allows one compressor to take over when the other is overloaded or under maintenance, ensuring uninterrupted airflow.
The alternator system also distributes runtime evenly between both pumps, improving service life and reducing maintenance costs over time.
-
Campbell Hausfeld CE7051: High-performance 5HP two-stage compressor designed for 230V single-phase grids, providing increased air pressure for heavy-duty pneumatic tools.- Power Configuration: 5.0 HP Two-Stage
- Volume Delivery: 495 L/min (17.5 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- Build Quality: 15,000 Hour Pump Rating
-
The BelAire 318HL is engineered for lower vibration and smoother operation compared to many conventional industrial compressors. Its belt-driven design and heavy-duty pump construction help reduce operating noise while maintaining exceptional airflow output. For facilities requiring even quieter performance, BelAire also offers Quiet Power series models with sound-reducing enclosures. -
The BelAire 338HE is designed for facilities that require consistent air pressure, long duty cycles, and reduced downtime. The two-stage pump compresses air more efficiently than single-stage units, lowering heat and improving overall lifespan. Combined with the 80-gallon tank, it reduces frequent cycling and helps maintain stable air delivery during peak demand.
This model is commonly used in professional environments where air reliability directly impacts productivity, such as repair bays, fabrication shops, and production lines.
Reviews
There are no reviews yet.