-
×
RCP-C1130G
1 × $1,899.00 -
×
K2624-1
1 × $7,999.00 -
×
DXCMTA1980854.SAN
1 × $220.00
Subtotal: $10,118.00
Air Tools Compressor
Professional Grade Air Tools for Industrial Projects
Upgrade your workshop with professional grade air tools built for high-torque applications. Our selection features heavy-duty pneumatic gear designed to handle the most demanding industrial projects. From precision air drills to rugged impact wrenches, we provide the durability that US contractors and automotive experts rely on for daily performance.
High PSI Air Compressors for Continuous Airflow
Find the perfect high PSI air compressors to power your entire pneumatic system. We specialize in units that deliver sustained CFM (Cubic Feet per Minute), ensuring your tools never stall during critical tasks. Whether you need an oil-free portable unit or a high-capacity stationary tank, our compressors provide the rapid recovery times essential for busy job sites.
Heavy Duty Pneumatic Accessories and NPT Fittings
Complete your setup with heavy duty pneumatic accessories engineered for leak-free performance. A reliable air power system requires high-visibility air hoses, industrial-grade pressure regulators, and precision NPT fittings. Proper air filtration and moisture traps are vital to prevent internal tool corrosion and maintain peak operating efficiency.
Frequently Asked Questions What is the best high CFM air compressor for grinders?
For continuous tools like grinders, we recommend a compressor that delivers at least 4-7 CFM at 90 PSI. Our professional grade air compressors are built to meet these high-demand requirements consistently.
Are these pneumatic tools rated for automotive shops?
Yes, our heavy duty pneumatic gear is specifically tested for the high-torque needs of professional automotive shops and heavy machinery maintenance.
-
The C583VS4 is built around a slow-turning cast iron pump design, which is one of its biggest advantages over standard 5 HP compressors. Instead of pushing high RPM for output, it prioritizes:
- Lower operating temperature
- Reduced internal wear
- Improved air dryness (less condensation buildup)
- Longer service intervals
This makes it especially suitable for shops where the compressor runs frequently throughout the day.
-
The RCP-10123D is designed for users who need stable airflow and redundancy in a compact industrial footprint. The duplex system allows:
- Alternating operation to balance wear between pumps
- Backup operation if one pump requires maintenance
- Improved uptime in busy workshop environments
The cast iron two-stage pump design improves efficiency by compressing air in two stages, reducing heat and increasing durability. The system is optimized for:
- Automotive repair shops
- Tire service centers
- Light fabrication workshops
- Maintenance facilities
- Small manufacturing operations
The 120-gallon receiver tank helps stabilize pressure during peak demand, reducing compressor cycling and improving tool performance consistency.
-
Chicago Pneumatic RCP-1630G Air Compressor: High-output 16HP gasoline-powered service truck compressor featuring a Vanguard engine, designed to deliver professional-grade pneumatic power in remote field locations.- Engine Specs: 16.0 HP Briggs & Stratton Vanguard
- Pneumatic Supply: 991 L/min (35.0 CFM)
- Maximum Force: 175 PSI (12 Bar)
- Tank Dimension: 30 Gallon Horizontal
- Technical Spec: 12V Electric Start & Recoil Backup
-
Chicago Pneumatic RCP-4961VNS Air Compressor: Efficient 5HP vertical compressor featuring a 60-gallon tank, engineered for small-to-medium automotive shops requiring reliable air in a space-saving footprint.- Drive Strength: 5.0 HP Single-Phase
- Flow Performance: 433 L/min (15.3 CFM)
- Compression Limit: 175 PSI (12 Bar)
- Vessel Size: 60 Gallon Vertical
- Build Quality: Solid Cast Iron Two-Stage Pump
-
Chicago Pneumatic RCP-7581VS vertical reciprocating compressor resolves professional garage tool limits, forcing an exceptional volume of continuous high-pressure air through a space-saving footprint to eliminate single-phase circuit line lag.- Supplies steady 25.3 CFM delivery rate.
- Space saving 80 gallon vertical tank.
- Robust 7.5 HP electric motor drive.
- Sustains 175 Psi peak tool pressure.
- Operates cleanly across 230V single phase.
-
Chicago Pneumatic RCP-C1130G Air Compressor: Heavy-duty 11HP gasoline unit featuring a Honda GX engine and a cast iron pump, built for extreme durability in mobile service and construction environments.
- Engine Specs: 11.0 HP Honda GX340
- Discharge Rate: 524 L/min (18.5 CFM)
- Force Rating: 175 PSI (12 Bar)
- Cylinder Capacity: 30 Gallon Horizontal
- Technical Logic: Fully Enclosed Belt Guard
-
The Chicago Pneumatic RCP-C1430G gasoline-powered compressor addresses remote industrial field maintenance constraints, leveraging a rugged 14 HP Kohler engine block to preserve high-pressure pneumatic tool paths without facility power drops.- High torque 14 HP Kohler engine.
- Steady free air capacity of 25.3.
- Maximum system pressure of 175 Psi.
- Compact 30 gallon horizontal storage tank.
- Convenient integrated automated electric start ignition.
-
Chicago Pneumatic RCP-C7583VS: Industrial 7.5HP vertical system featuring an “Iron Series” pump and 3-phase motor for high-cycle automotive shop environments.- Motor Specs: 7.5 HP 3-Phase
- Airflow Volume: 680 L/min (24.0 CFM)
- Pressure Peak: 175 PSI (12 Bar)
- Tank Orientation: 80 Gallon Vertical
- System Extra: Magnetic Starter Pre-Wired
-
The DXCM201 is designed around a high-pressure 200 PSI system, which gives it a key advantage: it can store more usable air in the tank compared to lower-pressure 20-gallon compressors. This translates into longer tool runtime before the compressor needs to refill.
However, its real working strength is the 6.2 SCFM at 90 PSI, which places it in the light-to-medium duty class:
- Good for impact wrenches (intermittent use)
- Suitable for air ratchets and nail guns
- Works for tire inflation and shop maintenance
- Not ideal for continuous high-demand tools like grinders or sandblasting
-
The DXCM271 is designed around a high-pressure storage strategy (200 PSI) rather than high airflow. This means:
- Longer tool runtime before the compressor restarts
- Faster recovery for small air tools
- Better efficiency for intermittent use
However, its airflow rating (around 5 SCFM) places it in the light-duty category, meaning it is best suited for:
- Nail guns and staplers
- Tire inflation and blow guns
- Small impact tools (intermittent use)
- Light painting or airbrushing (limited duty)
It is not intended for continuous tools like grinders or sandblasting equipment.
-
The DXCM602 is built around a high-pressure single-stage system, which gives it a key advantage: it stores more usable air in the tank compared to lower-pressure 135 PSI compressors. This helps reduce compressor cycling and improves tool runtime between refills.
However, its real performance strength is its 11.5 SCFM output, which places it in the light-to-medium shop class:
- Good for impact wrenches (intermittent use)
- Suitable for spray painting (light to moderate duty)
- Works for tire service and general maintenance
- Not ideal for continuous high-demand tools like sandblasting or heavy grinders
-
The DXCMH1393075 is designed for field operations where electrical power is unavailable or impractical. Its main strength is high airflow in a portable gas-driven platform, allowing it to run multiple pneumatic tools at the same time.
Key performance characteristics:
- Strong airflow for framing, nailing, and impact tools
- Stable pressure output for continuous jobsite use
- Engine-driven independence for remote work
- Durable cast iron pump designed for harsh environments
-
The DXCMLA4708065 is designed for steady, continuous shop air supply rather than peak portable performance. Its strength lies in its large tank capacity combined with a low-RPM cast iron pump, which allows it to:
- Maintain stable pressure during tool use
- Reduce compressor cycling frequency
- Support multiple intermittent air tools at once
Typical use cases include:
- Automotive repair shops
- Tire service centers
- Maintenance departments
- Light fabrication and metalworking
- Painting and spray applications (moderate duty)
It is not intended for heavy continuous tools like large sandblasting systems or industrial grinders running nonstop.
-
Dewalt DXCMTA1980854.SAN: Built for job-site mobility, this wheelbarrow-style compressor provides a low center of gravity and rugged pneumatic tires for easy transport over rough terrain.
- Drive Strength: 1.9 HP Electric Motor
- Airflow Volume: 170 L/min (6.0 SCFM @ 90 PSI)
- Pressure Peak: 150 PSI (10.3 Bar)
- Storage Build: 8 Gallon Twin Tank
- Elite Module: Heavy-Duty Cast Iron Cylinder
-
The DXCMV5018055 is built for users who need serious shop air capacity without moving into large industrial screw compressor systems. Its biggest advantage is its high airflow for a 5 HP class compressor (~18 CFM) combined with a large 80-gallon tank, which helps:
- Reduce pressure drops during tool use
- Support multiple intermittent air tools
- Improve recovery time compared to smaller compressors
- Maintain stable pressure during workshop demand peaks
-
The DXCMV5048055.1 is designed for serious shop workloads, not light DIY use. Its combination of high CFM output and large air storage capacity allows it to:
- Run multiple pneumatic tools at the same time
- Maintain stable pressure under intermittent heavy load
- Reduce compressor cycling due to large tank reserve
- Improve efficiency compared to single-stage compressors